Blue Smart IP65 24V 13A

This charger features a 24V 13A output, a seven-stage adaptive charging algorithm, and Bluetooth Smart connectivity for control via the VictronConnect app. It has an IP65 protection rating, making it resistant to dust, water, and chemicals.

The Victron Energy Blue Smart IP65 24V 13A charger delivers ultra-high energy efficiency, reaching up to 95%. This performance generates up to four times less heat compared to industry standards. Once the battery is fully charged, its standby power consumption drops to just 0.5 Watt.

Yes, the Victron Energy Blue Smart IP65 24V 13A charger has an IP65 protection rating. This means it is resistant to splashes, dust, and chemicals, making it ideal for demanding environments.

The Blue Smart IP65 charger can recover fully discharged batteries, even those with a voltage as low as 0 Volts. It will attempt to recharge a dead battery with a low current and resume normal charging once sufficient voltage has been established at the battery terminals.

Yes, the charger is equipped with a low-power mode. For 24V models, this mode reduces the charging current to 2, 3 or 4 amperes. It can be activated by pressing the MODE button for 3 seconds and remains active until disabled in the same way.

The charger is equipped with multiple protections to ensure safety and durability. These include protection against reverse polarity, output short circuits, and overheating. In case of overheating, the output current is reduced, but the charger continues to operate without failure.

Yes, the charger is completely silent. It has no cooling fan or other moving parts, ensuring noise-free operation.

Storage mode is an essential feature for reducing corrosion on the battery's positive plates. When the battery remains connected to the charger for more than 48 hours, the charge voltage is further reduced compared to the floating voltage, which minimizes battery aging.

The Blue Smart IP65 charger measures ambient temperature during the test phase and automatically compensates the charging voltage for lead-acid batteries. The optimal charging voltage for these batteries varies inversely with temperature. This compensation extends battery lifespan by adapting the charge to ambient conditions, from -30°C to +50°C. No special settings for cold or hot environments are required.

This charger is compatible with lead-acid batteries (including VRLA, Gel, and AGM) and lithium iron phosphate (LiFePO₄) batteries. It features a specific mode for Li-ion batteries with automatic reset of the undervoltage protection.

This specific model is designed to charge 24V batteries. It can initiate charging even if the battery voltage has dropped to 0 volts.

For the 24V 13A charger, the recommended battery size is 50 to 130 Ah. It can also be used for batteries outside this range, but charging time may be longer.

Yes, the charger includes Bluetooth Smart connectivity, allowing you to configure it, monitor it, and read data (voltage, current) via the VictronConnect app, available for iOS and Android smartphones and tablets.

Yes, the Victron Energy Blue Smart IP65 24V 13A charger has an automatic power supply function, allowing it to be used as a stable power source.

The charger is supplied with battery clamps and M8 eyelets for battery connection. These accessories allow flexible installation depending on your battery terminal type.

To connect the charger, follow these steps:

First, connect the charger to the battery, observing polarity (red clamp to positive, black clamp to negative). Then, plug the charger’s AC power cable into a wall outlet.

The charger is supplied with a 1.5-metre cable for connection to the battery (black and red wires) and a 1.5-metre cable for connection to the 230V AC mains, fitted with a CEE 7/17 plug.

The charger’s dimensions (height x width x depth) are 75 x 140 x 240 mm. Its weight is 1.9 kg.

The Victron Energy Blue Smart IP65 24V 13A charger is covered by a 5-year warranty.