VE.Direct IEC 48V 1200W

The VE.Direct IEC Victron Energy converter is a voltage converter designed to transform a 48V DC power source into stable 230V AC power. It is part of the new VE.Direct inverter range, offering improved power density and optimized performance at high temperatures.

The VE.Direct IEC inverter (model 48/1200) provides a continuous power output of 1150W at 25°C and 1000W at 40°C. Its peak power is 1600W for 15 seconds.

The DC input voltage range for this 48 V inverter is 36.8 to 62 V.

This specific model, the VE.Direct IEC, is equipped with an IEC-320 outlet plug. A male connector is included.

The VE.Direct IEC inverter includes multiple protections to ensure reliability and the safety of the installation. It is protected against:

Output short circuits.Overloads.Too high battery voltage.Too low battery voltage.Excessive internal temperature.Excessive DC ripple.

Yes, the VE.Direct IEC inverter is designed to provide high inrush current. This feature is essential for powering inductive loads or devices requiring a current spike at startup, such as power converters for LED lamps, halogen lamps, or certain power tools.

The VE.Direct IEC inverter can operate within a temperature range from -40°C to +65°C. A derating of 1.25% per °C is applied above 40°C, and it uses fan-assisted cooling. Ambient humidity must not exceed 95% (non-condensing).

The VE.Direct communication port enables connectivity with several types of devices:

A computer, via a VE.Direct to USB interface cable (required).Smartphones and tablets running Apple iOS and Android, as well as MacBooks and other devices, via a VE.Direct Bluetooth Smart electronic dongle (required).This connectivity simplifies inverter configuration and monitoring.

Yes, the inverter is fully configurable. You can adjust parameters such as:

Battery low voltage alarm trigger and reset levels.Battery low voltage cut-off and restart levels.Dynamic cut-off (load-dependent).Output voltage (adjustable from 210 to 230V).Frequency (50 Hz or 60 Hz).ECO mode activation/deactivation and detection level.

Yes, a remote on/off switch can be connected to a dedicated two-pole connector. It is also possible to connect the left contact of this connector to the positive pole of the battery, which is useful for automotive applications (for example, by linking it to the ignition switch).

Yes, for low-power inverters like this one, Victron Energy recommends using their Filax automatic transfer switch. The Filax offers a very short switching time (less than 20 milliseconds), allowing computers and other electronic equipment to continue operating without interruption.

The AC output voltage is configurable between 210 and 230V (+/- 3%). The output frequency is also configurable at 50 Hz or 60 Hz (+/- 0.1%).

For optimal performance, the inverter must be mounted on a flat surface. It is recommended to:

Avoid any contact with water and do not expose it to rain or moisture.Do not place it in direct sunlight.Maintain an ambient temperature between -20°C and 40°C (humidity).Leave at least 10 centimeters of free space around the inverter for adequate ventilation.The inverter will shut down if it overheats and will restart automatically once the temperature returns to a safe level.

Yes, this inverter is a Safety Class I product, which means the chassis must be grounded. A grounding point is located outside the product. The ground conductor connecting the chassis ground terminal to earth must be at least half the cross-section of the conductors used for the battery connection.

No, the VE.Direct IEC inverter does not have a fuse on its AC output. The AC wiring is protected by a fast current limiter in case of short circuit and by an overload detection mechanism that mimics fuse characteristics (i.e., faster shutdown in case of significant overload). It is important to size your wiring correctly according to the inverter's rated power.

For the 48V/1200VA inverter (PIN482121100), the recommended DC cable cross-sections for connection to the battery are:

For cable lengths from 0 to 1.5 meters: 6 mm².For cable lengths from 1.5 to 3 meters: 10 mm².It is important to use these cross-sections to ensure optimal performance and the safety of the installation.

The Victron Energy VE.Direct IEC inverter (PIN482121100) provides a continuous output power of:

1150 W at an ambient temperature of 25°C.1000 W at an ambient temperature of 40°C.It can also deliver a peak power of 1600 W for a limited duration of 15 seconds, which is useful for starting inductive loads.

You can configure and monitor your inverter via its VE.Direct communication port. You have two options for this:

Via a computer: You will need a VE.Direct to USB interface cable.Via a smartphone, tablet, or MacBook: You will need a VE.Direct Bluetooth Smart electronic key.This interface allows you to configure settings such as battery low alarm and cutoff voltage thresholds, restart levels, dynamic cut-off (load-dependent), output voltage (210-230V), frequency (50 or 60 Hz), and ECO mode. Monitoring includes input and output voltage, charge percentage, and alarms.

The Victron Energy VE.Direct IEC inverter (PIN482121100) is specifically fitted with an IEC-320 output socket. A male IEC-320 connector is typically supplied.