Hand pump for fresh water Flipper Mk4

Before ordering and installing the Whale Flipper Mk4 hand pump (reference GP0418), it is critical to verify its exact compatibility with the existing equipment on board your boat. Ensure that the manufacturer reference GP0418 matches the required specifications for your installation.

The Flipper Mk4 manual freshwater pump, part number Whale GP0418, is part of the Flipper Pump Mk4 product range by Whale. It is considered a flagship product within this range.

Before proceeding with the order and installation of the Flipper Mk4 pump, it is essential to verify the exact reference (GP0418) and ensure its compatibility with other components already present in your freshwater circuit.

The manufacturer of the Flipper Mk4 pump, with the reference GP0418, is the Whale brand.

This pump, with manufacturer reference GP0418, is part of the Whale Flipper Pump Mk4 range.

The Whale Flipper Mk4 hand pump is specifically designed for transferring fresh water in onboard water circuits. It provides reliable manual pumping, ideal for kitchen sinks or washbasins, or as a backup solution.

The Whale Flipper Mk4 pump is made from robust materials resistant to the marine environment. It typically uses acetal, polypropylene, stainless steel for fasteners, and nitrile rubber for the diaphragm. These materials ensure long service life and corrosion resistance.

Yes, the Whale Flipper Mk4 hand pump is self-priming up to a height of about 1.5 meters (5 feet). This means it can draw water without requiring an initial priming of the suction hose, making it easier to use.

The Whale Flipper Mk4 pump is specifically designed for transferring fresh water. It must not be used to pump wastewater, fuels, oils, or other corrosive, flammable, or non-potable liquids.

The Whale Flipper Mk4 pump is designed for use with flexible hoses with an internal diameter of 13 mm (1/2 inch). It is recommended to use appropriate fittings and hose clamps to ensure a watertight and secure connection.

Installing the Flipper Mk4 pump requires basic tools such as a screwdriver for the mounting screws, pliers for hose clamp tightening, and possibly a drill for creating mounting holes if needed. No specialized tools are typically required.

The Whale Flipper Mk4 pump is versatile and can be installed in various orientations, whether horizontally or vertically. The key point is that the pumping lever remains easily accessible to the user and that the plumbing connections are properly secured and free of kinks.

The Whale Flipper Mk4 hand pump is particularly suited to small sailboats, dinghies, inflatable boats, caravans and motorhomes that require a simple and reliable freshwater system. It is ideal as a primary or backup pump for sinks and washbasins.

Yes, the Whale Flipper Mk4 pump is compatible with fresh water tanks of various sizes. It draws water from the tank and delivers it regardless of tank capacity, provided the suction point is within its self-priming range (up to 1.5 meters).

No, the Whale Flipper Mk4 pump is a manual hand pump and is not designed to be integrated into an existing pressurized water circuit. It operates independently to supply water on demand without maintaining constant pressure in the system.

The Whale Flipper Mk4 pump is covered by a limited warranty in accordance with Whale’s manufacturer terms and conditions. For specific details on coverage and warranty duration, refer to the documentation provided with the product or visit the official Whale website.

The Flipper Mk4 pump is designed to be robust and require minimal maintenance. It is advisable to regularly check hose connections to ensure they are watertight and leak-free. If the pump is not used for an extended period, particularly in winter, it is recommended to drain the system to prevent freezing.