Gusher 30 Manual Bilge Pump - 38 mm Deck-Mounted Installation

The Whale Gusher 30 BP3000 bilge pump is designed for through-deck mounting. This means it is installed by passing through the deck of your boat, with the control handle and part of the pump body visible on deck, and the rest of the mechanism below deck in the bilge.

This is a manual bilge pump. It operates via manual actuation of a lever or handle, requiring no electrical power, making it self-sufficient and reliable in all conditions.

The BP3000 is identified as the flagship model in Whale's Gusher 30 range. It is the primary component for manual bilge pumping.

The Gusher 30 BP3000 manual bilge pump is designed to be connected to 38 mm diameter hoses. It is important to verify compatibility with your existing or planned hoses to ensure correct and watertight installation.

This bilge pump is manufactured by Whale and its manufacturer reference is BP3000. It is part of the Gusher 30 range, known for its manual bilge pumps.

The Whale Gusher 30 manual bilge pump, part number BP3000, is specifically designed for manual pumping and bilge drainage of your vessel. It allows you to evacuate accumulated water without requiring electrical power.

The Whale Gusher 30 manual bilge pump, part number BP3000, is a robust piece of equipment designed for manual drainage and pumping of water from a boat’s bilge. It is specifically suited for through-deck mounting, providing a reliable and efficient solution for manual water evacuation.

Yes, the Whale Gusher 30 manual bilge pump is designed to be self-priming. This means it can start drawing and pumping water without requiring manual priming, provided the suction height does not exceed the manufacturer's specifications.

The Whale Gusher 30 pump is designed to be connected to 38 mm (1.5 inch) diameter hoses for both inlet and outlet connections. This diameter ensures optimal flow for water discharge.

Yes, the handle of the Whale Gusher 30 pump is removable. This feature allows for easy storage of the handle when not in use and can also serve as a safety measure to prevent unintended activation.

The Gusher 30 pump is recommended for a wide range of vessels, including sailboats, medium-sized powerboats, and workboats. It is particularly suited to situations where a reliable and robust manual bilge pump solution is essential, whether as a primary or backup pump.

The Whale Gusher 30 pump is specifically designed for deck-mounted installation. This means the top of the pump is installed at deck level, while the pump body and hose connections are positioned below deck.

For through-deck installation of the Gusher 30 pump, a main hole of approximately 70 mm in diameter is typically required to allow the pump body to pass through. Additional holes are needed for the deck plate mounting screws. It is strongly recommended to refer to the cutting template or the installation manual provided by Whale for precise measurements.

Maintenance of the Gusher 30 pump is designed to be straightforward. It primarily involves regular inspection of the diaphragms and valves to check for any signs of wear or damage. It is also important to clean any debris that may accumulate. Wear parts are easily accessible for replacement if needed, ensuring the pump's longevity and reliability.

Yes, it is strongly recommended to install a filter or strainer at the inlet of the Gusher 30 pump suction pipe. This prevents debris such as leaves, hair or dirt from entering the pump, which could clog the valves, damage the diaphragm and compromise its proper operation.

The Gusher 30 pump must be installed in a deck position that is easily accessible for comfortable and efficient use. It is also crucial to ensure there is sufficient free space under the deck for the pump body and pipe connections, and that the handle can be operated without any obstruction.

Yes, the Whale Gusher 30 pump is specifically designed and manufactured with corrosion-resistant materials. This makes it perfectly suitable for use in marine environments and for pumping saltwater without risk of premature degradation.

For the complete installation of the Gusher 30 pump, you will generally need the following accessories:

38 mm (1.5 inch) diameter hoses for suction and discharge.Heavy-duty hose clamps to secure all hose connections.A through-hull fitting for the discharge hose exit through the hull.A suction strainer or filter, highly recommended to protect the pump from debris.