GPSMAP® 723 - 7" chartplotter with worldwide mapping

The Garmin GPSMAP 723 is an advanced chartplotter featuring a 7-inch touchscreen. It is supplied without an integrated fishfinder but includes worldwide chart mapping. This model is designed for extended network integration, allowing connection to cameras and other marine equipment for optimized navigation.

No, the Garmin GPSMAP 723 is specified as fishfinder-less. This means it has no integrated depth or fish detection capabilities. If you require fishfinder functions, you will need to consider a different model or add a compatible external transducer.

Yes, if your dashboard was cut for a GPSMAP 7x2, 9x2 or 12x2 chartplotter, you can use an adapter plate (sold separately) to convert the opening and install a GPSMAP 7x3, 9x3 or 12x3. The adapter plate installation instructions will guide you to mark and drill new holes if necessary.

For a flush-mount installation, the required cutout for the GPSMAP 723 is 148.4 mm (5 13/16 in) wide and 118.8 mm (4 11/16 in) high. It is strongly recommended to use the mounting template provided in the product box to ensure precise cutting and avoid damaging the device or voiding the warranty.

Yes, the GPSMAP 723 supports integration with third-party network cameras, including FLIR cameras. You can view the video stream on the chartplotter screen and even control certain camera functions (zoom, pan, tilt) via the touchscreen. To connect standard Ethernet devices, such as a network camera, to a Garmin marine network, a Garmin PoE isolation coupler (part number 010-10580-10) is required.

The GPSMAP 723 supports several camera tracking functions, provided the appropriate cameras and sensors are connected via a Garmin marine network or NMEA 2000. These functions include:

Compass lock: Keeps the camera fixed on a specific heading.Vessel lock: Locks the camera to a fixed angle relative to the vessel.Target tracking for AIS, MARPA, or waypoints: Allows the camera to be directed at specific targets.For compass lock and vessel lock, a compatible camera, GPS antenna, and heading sensor are required. For AIS/MARPA tracking, a compatible AIS receiver or radar device is also required.

The Garmin GPSMAP 723 chartplotter features a 7-inch touchscreen display, providing a clear and responsive interface for navigation.

No, the GPSMAP 723 model is specified as 'soundless'. It does not include a depth sounder for seabed detection and has no integrated depth sounder functionalities.

Yes, the GPSMAP 723 comes with a preloaded worldwide chart base, allowing you to navigate various sea areas immediately after installation.

Yes, the GPSMAP 723 supports integration of third-party network cameras. However, to connect a standard Ethernet device (such as a network camera) to the Garmin marine network, you must use a Garmin PoE isolation coupler (part number 010-10580-10). Connecting a PoE device directly to the Garmin chartplotter could damage the unit.

Yes, the GPSMAP 723 is compatible with FLIR marine cameras in the M and MD series. When you connect a compatible FLIR camera, the network detects it automatically and displays it in the source list without requiring any pre-configuration.

The GPSMAP 723 is designed for flush mounting. A mounting template is included in the product box to simplify installation. It is recommended to use this template rather than printing your own to ensure precise cutting.

Yes, if your dashboard was cut for a GPSMAP 7x2, 9x2 or 12x2 chartplotter, you can use an adapter plate (sold separately) to convert the opening and install a GPSMAP 7x3, 9x3 or 12x3.

Yes, the GPSMAP 723 supports camera tracking. This includes features such as compass lock, vessel lock, and tracking of AIS targets, MARPA targets, or waypoints (slew-to-cue). Specific sensors and cameras are required to enable these functions.

To use Compass Lock and Vessel Lock, you must connect the following to the chartplotter:

A marine camera compatible with tracking (e.g., a recent FLIR IP video camera).A GPS antenna.A heading sensor (for optimal performance, a 9-axis heading sensor providing data on yaw, pitch, and roll is recommended).

For optimal network performance, Garmin recommends not streaming more than five video sources simultaneously. You can configure split-screen displays to show multiple videos at once, but only one video function per split-screen can use an integrated composite video input.

Yes, you can control compatible FLIR cameras directly from the touchscreen of your GPSMAP 723 chartplotter. This includes touch gestures such as pinching to zoom and swiping to pan and tilt the camera. You can also set up custom presets on the screen for each camera.

For a flush-mount installation of the GPSMAP 723, the required cutout on the mounting surface is 180.6 mm (7 1/8 in) wide and 118.8 mm (4 11/16 in) high. It is critical to use the template provided with the product to ensure precise cutting and avoid damage.

Yes, current Garmin chartplotters, including the 723, feature a built-in video encoder. This allows them to share connected video via their composite video inputs across all chartplotter screens connected to the Garmin marine network.