Sondeur HDS-9 PRO bez sonde

The HDS-9 PRO fishfinder features a 9-inch screen with a resolution of 1280 x 720 pixels. It is a multi-touch touchscreen.

Yes, the HDS-9 PRO screen is designed for excellent readability even in full sunlight. It features a brightness exceeding 1200 nits and wide viewing angles of 80° in all directions (up, down, left, right).

No, this version of the LOWRANCE HDS-9 PRO, reference 000-15997-001, is sold without a transducer. This allows you to select the most suitable transducer for your fishing type and existing setup.

The HDS-9 PRO is compatible with a wide range of fishfinder technologies, including:

CHIRP low, medium and high frequency sounders up to 1 kW.DownScan (455/800 kHz or CHIRP 700/1200 kHz).SideScan (455/800 kHz or CHIRP 455/1075 kHz).Real-time fishfinder systems such as Lowrance ActiveTarget.

The HDS-9 PRO requires a 12 V DC power supply. The accepted voltage range is 10.8 V to 18 V DC.

A 3 A fuse on the positive power line is recommended to protect the unit.

The unit has two dedicated sonar ports (9-pin connectors), allowing connection of multiple sounders or advanced fishfinder modules.

Yes, the HDS-9 PRO is equipped with an NMEA 2000 port (Micro-C connector) to connect to your boat's network and share data with other compatible devices (engine, sensors, etc.).

The HDS-9 PRO fishfinder has a waterproof rating of IPX6 and IPX7, protecting it against powerful water jets and temporary immersion.

Yes, the HDS-9 PRO is equipped with two Ethernet ports that allow it to connect to other multifunction displays, sounder modules, radars, and other compatible devices to share information and functionalities.

Yes, it is possible to connect an analog video source. The device has a video input port via the power cable. Note that an adapter cable, sold separately, is required for this connection.

The HDS-9 PRO has a maximum power consumption of 40 W, which corresponds to a current draw of 2.9 A at 13.8 V DC.

The HDS-9 PRO is designed to operate within a temperature range of -15°C to 55°C (5°F to 131°F).

Yes, the HDS-9 PRO features a hybrid interface. It has a multi-touch screen for intuitive operation and a full physical keypad for precise and reliable control, even in rough seas or when wearing gloves.

The weight of the HDS-9 PRO screen alone is 1.39 kg (3.06 lb).

Yes, you can connect a compatible Lowrance radar directly to one of the two Ethernet ports on the HDS-9 PRO to display radar data on the screen.

The HDS-9 PRO is compatible with the main marine cartography systems, including C-MAP charts (DISCOVER, REVEAL) and Navionics charts. You can use charts stored on a microSD card.

To create an MOB (Man Overboard) waypoint in an emergency, simply press the Zoom in (+) and Zoom out (-) buttons simultaneously on the device.

Yes, the HDS-9 PRO features a 9-inch multi-touch display with excellent sunlight readability thanks to its brightness exceeding 1200 nits.

It has a resolution of 1280 x 720 pixels and wide viewing angles (80° in all directions), allowing easy access to navigation and fishing data from any position on the boat.

As this model is sold without a transducer, it offers great flexibility to build your own network. It features two 1 kW sonar ports and supports:

Traditional CHIRP fishfinder (low, medium, and high frequency).High-resolution SideScan and DownScan imaging technologies.Most advanced real-time detection systems such as Lowrance ActiveTarget and Garmin Ghost 360.

The HDS-9 PRO fishfinder operates on a 12 V DC electrical system (accepted voltage range: 10.8 to 18 V DC). Its maximum power consumption is 40 W (approximately 2.9 A at 13.8 V DC).

To ensure a secure installation and protect your device, it is recommended to install a 3 A fuse or equivalent circuit breaker on the positive power line.