Távoli vezérlés, automatikus kioldású kézi kapcsolású akkumulátorleválasztó ML-RBS – 12 V

The BLUE SEA ML-RBS 7713-BSS is a remote-controlled battery switch designed for managing battery banks in marine environments. It allows connecting or disconnecting a battery bank from a load, or isolating connected battery banks. It also includes a manual control with an automatic unlock function for direct operation.

Thanks to its bistable magnetic latching design, the ML-RBS 7713-BSS has a very low continuous current consumption, less than 13 mA at 25°C. It only draws a higher current (less than 7 A at 25°C for 20 ms) during state changes (activation or deactivation), which optimizes the system's power consumption.

The ML-RBS 7713-BSS battery switch offers the following current ratings:

Continuous current: 500 A DC
Intermittent current (5 minutes): 700 A DC
Starting current (30 seconds): 1450 A DC
These values are achieved with double 4/0 AWG cables (2x 120 mm²).

Yes, the ML-RBS 7713-BSS is equipped with a manual control. This function allows direct ON/OFF control with or without electrical power, and includes a "LOCK OFF" capability for safe maintenance of the electrical system.

The silver alloy contacts of the ML-RBS 7713-BSS provide high reliability for switching loads under voltage. They ensure consistent performance and increased durability, even when switching high currents.

Yes, the battery switch is designed to resist corrosion. It is equipped with 3/8"-16 (M10) tinned copper studs that provide maximum conductivity and excellent corrosion resistance in marine environments.

The ML-RBS 7713-BSS has a mechanical endurance of 100,000 cycles. For load switching, it can perform 10,000 cycles at 300 A under 12 V DC, ensuring long service life even under intensive use.

The ML-RBS 7713-BSS battery switch meets the external ignition protection requirements of ISO 8846 and SAE J1171. It is also CE marked and rated IP66, meaning it is protected against powerful water jets.

It is recommended to install the ML-RBS 7713-BSS battery switch as close as possible to the battery bank. This proximity minimizes voltage drop and optimizes the performance of the electrical system.

The 3/8"-16 (M10) tin-plated copper studs on the battery switch can accommodate 3/8" (M10) cable terminals. The battery switch is designed to handle cables up to double 4/0 AWG (2x 120 mm²) to reach its maximum current ratings.

The ML-RBS 7713-BSS battery isolator is equipped with 3/8"-16 (M10) stud connectors, providing a robust and reliable connection for battery cables.

The maximum recommended torque for the connection studs is 140 in-lb (15.8 N•m). It is important to respect this value to ensure a secure connection and avoid damaging the studs or cables.

Yes, the retail units of the ML-RBS 7713-BSS include a remote control switch, model PN 2155. This switch is of the SPDT (Single Pole Double Throw) ON-ON type and allows remote control of the battery cut-off switch status.

Yes, the ML-RBS 7713-BSS battery switch is rated IP66. This means it is protected against powerful water jets, making it suitable for marine environments where it may be exposed to moisture and splashing.

No, the specific ML-RBS 7713-BSS model is designed and rated for 12V DC electrical systems. For 24V DC systems, refer to other models in the Blue Sea Systems ML series, such as PN 7717, which are specifically designed for this voltage.

Yes, the ML-RBS 7713-BSS can be used to combine multiple battery banks or to isolate battery banks that are connected. It provides the flexibility needed to efficiently manage power across different battery banks.

Yes, the ML-RBS 7713-BSS battery isolator provides an LED output to remotely indicate the switch status. The remote control switch PN 2155, included in retail units, also features an LED for this visual indication.

The BLUE SEA ML-RBS 7713-BSS battery isolator is equipped with a single manual control that allows direct operation. This feature provides several options:

ON/OFF control: You can manually turn the battery isolator on or off, whether the system is powered or not."LOCK OFF" function: For safe maintenance of the electrical system, you can lock the battery isolator in the OFF position.
This manual control capability distinguishes it from the solenoid versions of the ML-Series (PN 7718/7719), which do not offer this feature.

For optimal performance and to minimize voltage drop, the ML-RBS battery switch must be installed as close as possible to the battery bank. It is also recommended to install a remote control switch (SPDT or SPST) in a convenient location, near other electrical controls or a passageway, to allow quick access in an emergency.

The connection studs are tin-plated copper, size 3/8"-16 (M10), and must be tightened to a maximum torque of 15.8 N•m (140 in-lb) to ensure maximum conductivity and corrosion resistance.