Tápkábel Hook2, Hook Reveal & Cruise készülékekhez

This Lowrance power cable (reference 000-14172-001) is specifically designed to be compatible with the following devices:

Lowrance Hook2 fishfinders and chartplotters in 5-, 7-, 9-, and 12-inch sizes.All Lowrance Hook Reveal series.All Lowrance Cruise series.

No, this power cable is not compatible with Lowrance Hook2 4-inch devices. The Hook2 4-inch models require a different connector.

Yes, this power cable is fully compatible with all Lowrance Hook Reveal series devices. It provides stable and reliable power for these models.

Yes, this cable is designed to work with all Lowrance Cruise series devices, ensuring adequate power connection.

No, this power cable is not compatible with the Lowrance HDS or Elite Ti series. These models use distinct connectors and wiring architectures.

Yes, this power cable (part number 000-14172-001) is an original equipment manufacturer (OEM) spare part manufactured by Lowrance. It is designed to fit perfectly and meet the manufacturer's specifications.

This cable is fitted with a push-in type connector at one end, which inserts directly and easily into the power port of your compatible Lowrance device.

The other end of the cable consists of bare wires. These wires are intended to be connected to your boat's electrical power system, typically via a terminal block or dedicated switch, while respecting polarity.

This power cable is a two-wire design, one for positive (+) and one for negative (-), to supply power to your device.

The primary function of this cable is to provide a stable and reliable power supply to your Lowrance fishfinder or chartplotter from the Hook2 series (5, 7, 9, 12 inches), Hook Reveal and Cruise models, by connecting it to your boat's electrical system.

No, this cable is not universal for all Lowrance devices. It is specifically designed for the Hook2 models (5, 7, 9, 12 inches), Hook Reveal and Cruise. Other Lowrance ranges may require different power cables.

The reference number (SKU) for this Lowrance power cable is 000-14172-001.

Yes, as an original Lowrance accessory for marine electronics, this cable is designed to withstand typical marine environmental conditions, including moisture and vibrations, to ensure durable performance.

No, this power cable does not include an integrated fuse. The protective fuse must be installed separately on your boat's power circuit, in accordance with the recommendations of your Lowrance device manufacturer and marine safety standards.

Yes, this power cable is fully compatible with Lowrance Hook2 models of 7 and 9 inches, as well as the 5 and 12 inch versions.

This cable is a power cable designed to provide continuous power to the Lowrance device for its operation. Lowrance devices in the Hook2, Hook Reveal, and Cruise series are generally not designed to be recharged via this type of cable but to be powered by the boat's battery.

Installing the push-in part in the device does not require any tools. Wiring the stripped wires to the boat's electrical system may require basic tools such as wire strippers, a screwdriver, or crimping pliers, depending on the type of connection used on your boat.

While it is technically possible to extend an electrical cable, it is generally recommended to use the original cable length to maintain signal and power integrity. If extension is necessary, it is crucial to use a cable with the appropriate cross-section and to make watertight and reliable connections to avoid any performance loss or electrical risk.

No, this power cable is not compatible with older Lowrance models such as the Elite-5 or Mark-5. It is specifically designed for newer series: Hook2 (5, 7, 9, 12 inches), Hook Reveal, and Cruise.

Lowrance power cables typically use the red wire for the positive connection (+) and the black wire for the negative connection (-) (ground). It is always recommended to check your Lowrance device documentation to confirm the exact polarity before making the connection.