Kábelátvezető CableClam oldalsó bevezetéssel rozsdamentes acél fedővel

The CableClam with side entry has a length of 56.80 mm (2.24 in) and a width of 53.35 mm (2.10 in). With the cap installed, the total height is 19.69 mm (0.78 in).

The cable pass-through opening measures 15.51 mm (0.61 in) in width and 14.16 mm (0.56 in) in height. This makes it suitable for medium-sized cables, such as those used for deck lighting, sensors, or antennas.

To install the CableClam, follow these steps:

Pass the cable through the central hole of the gasket.Insert the cable into the groove of the deck ring.Secure the deck ring and gasket to the surface by tightening each screw a few turns at a time. Do not overtighten the screws.Press the stainless steel cap onto the assembly, aligning the cap’s groove with the cable.

The stainless steel cap provides superior resistance to UV and corrosion compared to fully plastic versions. It also adds an aesthetic touch and ensures increased durability in demanding marine environments.

The mounting holes of the CableClam are designed for #8 screws. It is important not to overtighten the screws during installation to avoid damaging the product or the mounting surface.

This side-entry CableClam is designed for cable routing parallel to the mounting surface, optimizing deck integration and reducing bend stress on cables. Traditional cable glands often have a perpendicular cable exit from the surface.

Yes, the CableClam is designed for marine environments. Its stainless steel cap provides superior resistance to UV rays and corrosion, making it a durable and robust solution for ship decks.

Yes, it is important not to overtighten the screws when securing the deck ring and the gasket to the surface. Tighten each screw a few turns at a time until it is firmly in place, but without applying excessive force.