i50 Depth mélységjelző kijelző

The Raymarine i50 Depth display is a navigation instrument specifically designed to accurately display seabed depth. It is ideal for securing your navigation, particularly in areas with high tidal ranges or shallow waters.

The display has compact dimensions of 110 x 115 x 44 mm (width x height x depth). Its design allows for perfect flush mounting on the console or dashboard of your boat.

Yes, this instrument is designed for harsh marine environments. It has IPX6 waterproofing, which effectively protects it against breaking waves and heavy water spray.

Absolutely. The display features very large digits and offers excellent viewing angles (+70° / -70°), ensuring perfect readability both day and night, even when offset from the instrument.

The display manages several essential sound and visual alarms for safety: a shallow-water alarm (minimum depth) and a maximum depth alarm. You can adjust the thresholds according to your navigation needs.

Yes, you can configure the measurement unit according to your preferences during user calibration. The display allows you to show depth in meters (m), feet (ft), or fathoms (fa).

Yes, it has adjustable backlighting. Additionally, if connected to a SeaTalk NG network, it can participate in group illumination, allowing synchronization of the backlight level across all compatible Raymarine instruments.

No, the E70059 reference corresponds to the i50 Depth display sold separately (without a sensor). If you do not have an existing transducer, you will need to purchase a compatible depth transducer separately or choose a complete pack.

The i50 Depth is dedicated solely to displaying depth. The i50 Tridata, on the other hand, combines depth, speed (log), and water temperature data on a single screen divided into three zones.

Installation is flush-mounted (Flush Mount). A mounting template is provided to precisely cut your console. The screen is then secured from the front, and the bezel (lens) clips over it for a clean finish.

The instrument operates on a 12 V DC electrical system. Its acceptable operating voltage range is from 10 V to 16 V DC.

The device is powered directly via the SeaTalk NG network. Simply provide a 12V power supply to the main SeaTalk NG backbone, which will then distribute power to the display through its spur cable.

Yes, it is essential to protect the installation. The SeaTalk NG network power cable must be connected to the 12V battery via a 5 amp inline fuse or an equivalent thermal circuit breaker.

The i50 Depth display has a dedicated rear connection (terminal block type) allowing direct connection of wires from a compatible Raymarine or Airmar analog depth transducer.

Yes, the display is fully compatible with the NMEA 2000 protocol via Raymarine's SeaTalk NG connectivity. It can thus share depth data with your chartplotters and other NMEA 2000 devices.

Absolutely. The i50 Depth is designed to be backward compatible with the older SeaTalk 1 standard. It includes the necessary connectivity to integrate easily into a legacy instrument network (such as the ST60 series).

The display is compatible with many analog Raymarine and Airmar transducers, such as models P17, P319, P79 (In-hull), B17, B45, or the P66. You can use through-hull, adhesive, or transom-mounted transducers.

Yes. If the depth transducer is connected to another instrument or a sounder module on the network, the i50 Depth will automatically configure itself as a repeater to display data received via the SeaTalk NG or SeaTalk 1 network.

It is recommended to use only a clean, damp cloth to wipe the screen. Never use abrasive products, acids, ammonia-based cleaners, or solvents, as they could damage the screen coating and compromise waterproofing.