Ampermetras analoginis 0-50 A

This ammeter is specifically designed to measure direct current (DC).

This ammeter has a measurement range of 0 to 50 amperes (0-50A).

This is an analog ammeter, meaning it displays the current measurement via a needle on a graduated dial.

The ammeter is supplied with a shunt.

Yes, this ammeter is from BEP, a brand known for its marine electrical equipment, and is designed for panel mounting in nautical applications.

This ammeter is a product from the BEP brand.

This ammeter is designed for panel-mount installation, making it ideal for integration into dashboards or electrical panels.

Yes, a shunt is absolutely necessary for this ammeter to measure current. A shunt is included with the device.

The ammeter is connected to the shunt using measurement wires. The shunt must be inserted in series in the circuit whose current you want to measure. The ammeter then measures the small voltage drop across the shunt.

The shunt must be installed in series with the load or current source you wish to monitor. It is important to position it so that all the current to be measured flows through it.

An analog ammeter of this type typically does not require an external power supply for its basic measurement function, as it uses the voltage drop across the shunt. If the device includes a backlight, a separate power supply (often 12V DC) would be required for that function only, but this is not specified for this model.

The exact cutout dimensions for panel mounting are provided in the product-specific installation documentation. Refer to this document to ensure correct installation.

Yes, if the shunt is correctly installed in the battery's charge or discharge circuit, this ammeter can monitor the current entering or leaving the battery.

The ammeter itself, which measures the voltage drop across the shunt, is generally compatible with 24V DC systems provided the shunt is correctly sized for the maximum current. However, if the device has a backlight requiring power, this may be limited to 12V DC, requiring a converter if the system is 24V. This information is not specified for this model.

This ammeter is ideal for monitoring DC current in various marine applications, such as electrical equipment consumption, battery charging via solar panels or alternators, and battery discharge.

Installing and wiring an ammeter with a shunt requires a solid understanding of electrical principles and safety. It is recommended to hire a professional or to carefully follow the wiring instructions provided in the manual to avoid any damage or risk.

No, this ammeter is specifically designed to measure direct current (DC) and cannot be used to measure alternating current (AC).