Atsarginis jungiklis HD 50A

The BEP HD 50A circuit breaker (part number 185050F/DSP) is a robust thermal circuit breaker designed specifically for protecting electrical circuits in marine environments. It features a 50-amp capacity and a manual reset mechanism for surface mounting.

Its primary function is to protect electrical equipment and wiring from overloads and short circuits. In case of excessive current, it automatically cuts off the circuit to prevent material damage and fire hazards, ensuring safety on board.

The "HD" designation stands for "Heavy Duty", indicating a reinforced design. This means the circuit breaker is built for increased durability, capable of withstanding the demanding conditions of the marine environment such as vibrations, corrosion, and temperature variations.

This circuit breaker has a rated current of 50 amperes. It is designed to protect circuits that do not exceed this value during normal operation.

The manual reset mechanism means that after a trip due to an overload, the circuit breaker does not reset automatically. The operator must identify and resolve the cause of the overload, then manually press the reset button to restore power to the circuit.

Yes, this circuit breaker is explicitly designed for demanding marine environments. Its "Heavy Duty" design makes it resistant to typical marine conditions such as humidity, corrosion, and vibrations.

It is suitable for a wide range of onboard applications, including charging systems (e.g., alternators, battery chargers) and auxiliary power circuits, thus protecting various electrical equipment.

This circuit breaker is manufactured by BEP, known for its energy management and distribution solutions in the marine sector.

Yes, its "Heavy Duty" design includes enhanced corrosion resistance, which is critical for durability and reliability in the salty and humid environment typical of marine applications.

Yes, its reinforced "Heavy Duty" design makes it particularly resistant to vibrations, a crucial feature for equipment installed aboard ships and other vessels.

Yes, thanks to its manual reset mechanism, it can also be used as a circuit breaker switch, allowing manual control of power to a specific circuit in addition to its protection function.

This circuit breaker is designed for surface-mount installation. This means it is attached directly to a flat surface, such as a panel or bulkhead, without requiring complex cutting for flush mounting.

Installing an electrical circuit breaker must always be done with caution. While surface mounting simplifies the mechanical aspect, it is recommended to follow the manufacturer's instructions and ensure the electrical installation complies with current marine safety standards. If in doubt, professional assistance is advised.

When installing in a marine environment, it is crucial to use connectors and cables suitable for this environment (resistant to corrosion and moisture). Ensure the circuit breaker is installed in a location protected from direct water spray where possible, even though it is designed to withstand the marine environment.

Yes, it is mandatory to always disconnect the main power supply (e.g., batteries) before working on your boat's electrical system to prevent any risk of electric shock or accidental short circuit.

Yes, this 50A circuit breaker is a reusable alternative to a 50A fuse. The advantage is that in case of overload, you only need to reset it manually once the issue is resolved, without having to replace a blown fuse.

This circuit breaker is compatible with 50 amp DC marine electrical systems requiring protection. It is designed for operation in typical boat and other marine vehicle environments.

Yes, the BEP HD 50A circuit breaker is designed to be a reliable product. The "Heavy Duty" (HD) designation and its construction for demanding marine environments attest to its robustness and durability, aimed at providing constant and reliable electrical protection over the long term.