CableClam 0.83" - Cable Clam Cutaway Drawing

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 8%

Blue Sea Systems

1002-BSS

Preso-užtvara CableClam 0.83" (21 mm)

Le CableClam 0.83" de BLUE SEA est un passe-câble marin conçu pour assurer l'étanchéité des entrées de câbles sur les ponts et cloisons. Ce modèle, PN 1002 de la série CableClam, est optimisé pour des câbles d'environ 0.83 pouce de diamètre, offrant une protection fiable contre l'eau. Le produit est livré avec un anneau de pont, un joint d'étanchéité, un anneau de compression et la visserie nécessaire.

Formatas: 0,83 colio

0,68 colio 0,83 colio 1,4 colio Šoninis įėjimas

Apdaila: Standartinis

Standartinis Inkaro gaubtas

Public priceGet pro pricing

25,39€

25,39€ ~~27,72€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Sandėlyje

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

Maksimalus kabelio skersmuo (mm)	21.0
Montavimo tipas	Low Profile
IP klasifikacija	IP67
Dalijamas	Oui
Gasket Diameter Mm	19.69
Gasket Drilling Required	Oui
Sandarinimo tarpelio medžiaga	Caoutchouc
Gasket Slitting Required	Oui
Installation Screw Tightening Method	Serrage progressif
Mounting Screw Size Imperial	#8
Bendras aukštis mm	22.92
Bendras ilgis mm	55.03
Bendras plotis mm	23.94
Produkto linija	CableClam
Produkto tipas	Passe-câble

Detailed description

BLUE SEA CableClam 0.83" yra kabelių pravedimo įtaisas, skirtas užtikrinti patikimą kabelių praėjimo hermetiškumą jūrinių denių ir pertvarų atžvilgiu. Priklausantis CableClam serijai (kuri apima PN 1001, 1002 ir 1003 modelius skirtingų kabelių dydžiams), šis modelis optimizuotas kabeliams, kurių skersmuo atitinka 0.83 colio (apie 21 mm) tarpą. Jis yra esminis komponentas, skirtas elektrinių ir elektroninių kabelių tvarkymui per jūrinių paviršių, veikiamų jūros elementų.

Konstrukcija ir matmenys

Šis kabelių pravedimo įtaisas sudarytas iš denio žiedo, hermetiškumo tarpiklio ir suspaudimo žiedo. Jo bendrieji matmenys: 2.17 colio (55.03 mm) ilgio, 0.94 colio (23.94 mm) pločio ir 0.90 colio (22.92 mm) aukščio (sumontavus). Tarpiklio skersmuo – 0.78 colio (19.69 mm). Įrengimui reikalingas montavimo anga #8 tipo varžtui, garantuojanti tvirtą tvirtinimą prie paviršiaus. Konstrukcija leidžia diskretišką ir funkcionalų integruotumą, panašų į kitus hermetiškumo sprendimus, pvz., BLUE SEA ar konkurentų, tokių kaip Seaview, tačiau su dėmesiu į paprastumą ir efektyvumą konkrečių kabelių skersmenims.

Įrengimas ir veikimas

CableClam 0.83" įrengimas apima tarpiklio perforavimą kabelio skersmens dydžiu, po to – tarpiklio įpjovimą nuo krašto link centro. Tada denio žiedas ir tarpiklis tvirtinami, įstatomas kabelis, o tarpiklis suspaudžiamas suspaudimo žiede prieš užsukant pastarąjį ant denio žiedo. Šis metodas užtikrina tarpiklio palaipsnį suspaudimą aplink kabelį, sukurdamas hermetišką sandūrą. Svarbu neperspausti varžtų, kad nebūtų pažeisti komponentai, užtikrinant įrenginio ilgaamžiškumą ir išlaikant hermetiškumą ilgą laiką.

Documentation

Type	Nom
	EN - Dimensioned Drawing - CableClam 0.83in
	EN - Instructions - CableClam 0.83in

Expert review

Pol CONIN

Skaitmeninės veiklos vadovas

« Mastering watertightness for single cable penetrations »

BLUE SEA's CableClam 0.83" is an essential component for any installer concerned with the integrity of electrical and electronic systems aboard. Its practical value lies in providing a watertight entry point for a single cable, thus protecting the interior of the boat from saltwater infiltration—the primary cause of corrosion and equipment failure.

This model is ideal for cable penetrations of sensors, antennas, or small bundles requiring a 0.83-inch diameter. Installation is straightforward but requires careful attention to joint drilling: it is critical to use a drill bit matching the cable size while keeping the hole wet for a clean cut, ensuring optimal joint compression. Slitting the joint with a cutter is a critical step to avoid damaging the cable's insulation during insertion.

Compared to traditional cable glands, the CableClam offers a more aesthetic and often faster solution for a single cable. It differs from larger or multi-cable models by specifically targeting the needs of single-cable penetrations with minimal footprint. Its potential drawback is that it is tailored to a specific cable size for maximum watertightness; therefore, selecting the CableClam matching your cable diameter is crucial to ensure long-term reliability.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Preso-užtvara CableClam 0.83" (21 mm)

25,39€

25,39€ ~~27,72€~~

Frequently asked questions

Need help? Contact us

What is BLUE SEA's CableClam 0.83" and what is its primary function?

BLUE SEA's CableClam 0.83" is a cable gland designed to ensure reliable waterproofing when routing cables through decks and bulkheads on your boat. It consists of a deck ring, a sealing gasket, and a compression ring, forming a robust solution for managing electrical and electronic cables in a marine environment.

What are the physical dimensions of the CableClam 0.83" once installed?

Once installed, the CableClam 0.83" has the following overall dimensions:

Length: 2.17 inches (55.03 mm)Width: 0.94 inch (23.94 mm)Height: 0.90 inch (22.92 mm)

How to prepare the sealing gasket of the CableClam before inserting the cable?

Sealing gasket preparation is a two-step process:

Drill the gasket with a sharp bit matching the cable diameter you intend to pass through. Keep the drilling area moist. The hole will be slightly smaller than the cable.

Use a fine-blade knife to slit the gasket from its outer edge to the central hole you just drilled.

What is the procedure for securing the CableClam 0.83" to the surface?

The securing procedure is as follows:

Fix the deck ring and the sealing gasket to the mounting surface using a #8 screw. Slide the compression ring onto the cable, then insert the cable through the slot in the gasket. Press the gasket into the compression ring. Screw the compression ring to the deck ring, tightening each screw a few turns at a time.

Is there a specific tightening procedure for the screws during installation?

Yes, it is important to tighten the compression ring screws progressively, alternating turns on each screw. Do not overtighten the screws to avoid damaging the product or the mounting surface and to ensure optimal joint compression.