e-Series Selector 3 Position Battery Switch with AFD - e-Series Selector 3 Position Battery Switch with AFD

e-Series Selector 3 Position Battery Switch with AFD - Dimensioned Drawing

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 10%

Blue Sea Systems

11001-BSS

Baterijos atjungimo jungiklis e-Series 3 padėčių su AFD

L'interrupteur de batterie BLUE SEA e-Series Selector 3 Position avec AFD (11001-BSS) est une solution robuste pour la gestion de deux parcs de batteries sur les moteurs in-bord. Il offre une capacité continue de 350 A à 32 V DC et intègre une protection Alternator Field Disconnect pour l'alternateur. Conçu pour répondre aux exigences ABYC et UL, il garantit sécurité et fiabilité en milieu marin. Ce modèle fait partie de la gamme e-Series actuelle de Blue Sea, et est livré avec l'interrupteur seul.

Public priceGet pro pricing

72,24€

72,24€ ~~80,34€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Sandėlyje

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

Produkto paskirtis	Gestion et isolation des parcs de batteries, démarrage d'urgence
Perjungiklio tipas	Sélecteur de batterie
Nuolatinė srovė (A)	350
Trumpalaikė srovė (A)	600
Įsijungimo srovė (A)	1200
Maksimali nuolatinė įtampa	32
Polių skaičius	1
Pozicijos	3
AFD apsauga	Oui
Gnybto tipas	Goujon (cuivre étamé)
Gnybto dydis	3/8"-16 (M10)
Kabelių jungties tipas	Cosses à œillet
Valdymo tipas	Manuel rotatif
Montavimo tipas	Montage en surface / Montage sur panneau arrière / Montage sur panneau avant
IP klasifikacija	IP66
Veikimo įtampos diapazonas	Jusqu'à 32V DC
Panelio išpjovos skersmuo	92.08
Veikimo temperatūros diapazonas	-40 à +85 °C
Svoris	0.52
Matmenys (P x A x G)	98 x 98 x 40.39
Garantija	99.0
ABYC atitikimas	Meets all ABYC requirements
Veikiklio spalva	Rouge
Actuator Feedback Type	Tactile
Veikiklio stilius	Bouton rotatif
Alternator Diode Protection Mechanism	Réduction de la sortie de l'alternateur à zéro
Ampiražas	350
Battery Inputs Count	2
Cable Clearance Mm	27.9
Cable Entry Count	1
Cable Size To Meet Ratings Awg	4/0 AWG
Cable Size To Meet Ratings Mm2	120
Cable Terminal Torque Nm	24.86
Cranking Current Duration	30
Emergency Start Capability	Non
Suderinamas variklio tipas	In-bord essence ou diesel
Flange Nut Material	Acier inoxydable
High Power Application Focus	Haute puissance, fiabilité et faible génération de chaleur
Ignition Protection Standard	SAE J1171, ISO 8846
Įrengimo tipas	Montage en surface / Montage sur panneau arrière / Montage sur panneau avant
Intermittent Current Duration	5
Šviesos indikatorius	false
Make Before Break Feature	Oui
Max Accepted Cable Size Mm2	120
Didžiausias baterijų skaičius nuosekliai	2.0
Didžiausias įkrovimo srovė (A)	350.0
Didžiausias iškrovos srovės stipris (A)	350.0
Mounting Area Required Sq In	15
Mounting Compatibility Brands	Perko, Guest
Mounting Hardware Type	Vis 1/4" (M6)
Montavimo orientacija	Montage en surface, sur panneau arrière ou sur panneau avant
Viršūninė iškrovos srovė	1200.0
Produkto taikymo aplinka	Marin et embarqué
Produkto tipas	Interrupteur de batterie
Recommended Cable Connection Method	Un câble 4/0 AWG à chaque borne batterie, deux câbles 4/0 AWG à la borne commune
Rekomenduojamas nuolatinės iškrovos srovės stipris	350.0
Selector Positions Description	Batterie 1, Batterie 2, Arrêt
Laikymo temperatūros diapazonas	-40 à +85 °C
Perjungiklio funkcija	Sélection de batterie
Terminal Stud Length Mm	22.22
Terminal Stud Material	Cuivre étamé
Terminal Stud One Piece Design	Oui
Terminal Torque Nm	15.82
Ul Certification Standard	UL 1107, UL 1500
Warranty Period Text	Garantie à vie

Detailed description

Skirtas jūrinėms ir laivuose įrengtoms elektros sistemoms, BLUE SEA e-Series Selector 3 padėčių baterijos jungiklis su AFD (kataloginis nr. 11001) užtikrina patikimą dviejų baterijų parkų valdymą. Šis 3 padėčių jungiklis (baterija 1, baterija 2, išjungta) skirtas taikymui, reikalaujančiam didelės galios, patikimumo ir mažo šilumos išsiskyrimo, pvz., laivuose su vidaus degimo varikliais (benzininiais ar dyzeliniais).

Techninės charakteristikos ir veikimas

Modelis 11001 užtikrina patikimą elektros veikimą su 1 200 A paleidimo srove 30 sekundžių trukmės. Jis atlaiko 600 A trumpojo jungimo srovę (5 minutes) ir 350 A nuolatinę srovę 32 V DC. Varinių, alavuotų 3/8"-16 (M10) gnybtų strypai užtikrina maksimalų laidumą ir korozijos atsparumą, o jų ilgis 22,22 mm leidžia prijungti kelis kabelių kištukus. Rekomenduojamas užveržimo momentas – 15,82 N·m (140 in-lb). Norint pasiekti nominalias vertes, būtina naudoti 4/0 AWG (120 mm²) kabelius.

Išplėstinės funkcijos ir atitikimas standartams

Modelio 11001 ypatumas – Alternator Field Disconnect (AFD) funkcija, kuri apsaugo alternatoriaus diodus, jei variklis įsijungęs ir jungiklis išjungiamas, sumažindama alternatoriaus išėjimo srovę iki nulio. Ši apsauga būtina ilgaamžiškumui. Jungiklis taip pat apsaugotas nuo užsidegimo (ignition protected), atitinka SAE J1171, UL 1500 ir ISO 8846 reikalavimus, todėl tinkamas įrengti benzininiuose laivuose. Atitinka ABYC reikalavimus baterijų jungikliams ir yra UL 1107 sertifikuotas. Korpusas leidžia montuoti ant paviršiaus arba užpakalinio panelio, suteikiant montavimo lankstumą. Skirtingai nuo e-Series Selector 4 padėčių ar Dual Circuit Plus modelių, šis jungiklis neturi "make-before-break" funkcijos perjungiant tarp baterijų parkų 1 ir 2, todėl būtina pereiti per "IŠJUNGTA" padėtį prieš keičiant parką.

Documentation

Type	Nom
	EN - Instructions - e-Series Selector 3 Position Battery Switch with AFD
	EN - M Series, E Series, And Hd Series Battery Switch Ope... - e-Series Selector 3 Position Battery Switch with AFD
	EN - E Series Battery Switches - e-Series Selector 3 Position Battery Switch with AFD
	EN - Manual - e-Series Selector 3 Position Battery Switch with AFD
	EN - Certificate - e-Series Selector 3 Position Battery Switch with AFD
	EN - Certificate - e-Series Selector 3 Position Battery Switch with AFD

Expert review

Pol CONIN

Skaitmeninės veiklos vadovas

« Technical analysis: BLUE SEA e-Series Selector 3-Position battery switch with AFD »

The BLUE SEA e-Series Selector 3-Position battery switch with AFD (model 11001-BSS) is a relevant solution for vessels equipped with two battery banks, typically a starting bank and a house bank. Its primary function is to isolate these banks, allowing you to select power from battery 1, battery 2, or cut all power in the OFF position. This is fundamental for electrical safety on board and energy management.

The key added value of this model lies in its Alternator Field Disconnect (AFD) system. This feature is crucial for preventing irreversible damage to the alternator’s diodes if the switch is toggled to OFF while the engine is running. Many competing switches or basic models in Blue Sea’s m-Series lack this protection, requiring manual precautions or additional circuits. Integrating AFD simplifies installation and enhances the reliability of the charging system.

For installation, it must be mounted near the batteries and the specified torque (15.82 N·m) for 3/8"-16 (M10) studs must be respected; these are tinned copper for better durability in marine environments. Using 4/0 AWG (120 mm²) cables is recommended to ensure nominal performance. It is critical to note that, unlike "make-before-break" switches (such as certain Selector 4-Position or Dual Circuit Plus e-Series models), switching from "Battery 1" to "Battery 2" (or vice versa) must be done by passing through the "OFF" position to avoid uncontrolled power interruptions. This is a limitation to consider for systems that cannot tolerate any momentary power cut. This model is ideal for owners seeking simple and secure management of two batteries with integrated alternator protection, without the complexity or cost of a four-position switch or a Dual Circuit Plus if they do not require direct combination via the switch.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Baterijos atjungimo jungiklis e-Series 3 padėčių su AFD

72,24€

72,24€ ~~80,34€~~

Frequently asked questions

Need help? Contact us

What are the main functions of the Blue Sea e-Series Selector 3-position battery switch with AFD?

The switch is designed to manage two battery banks. It isolates the starter and service circuits and allows combining both battery banks for emergency starting. It has three positions: battery 1, battery 2, and off (OFF).

What does the 'AFD' (Alternator Field Disconnect) function on this switch mean?

The AFD (Alternator Field Disconnect) function is a distinctive feature that protects the alternator's diodes. If the switch is turned off while the engine is running, it reduces the alternator output to zero, which is critical for the longevity of the charging system.

What is the DC current rating of this battery switch?

This switch has a DC current rating of 350 amperes at 32 V DC.

What is its cranking current capacity?

This switch has a cranking current capacity of 1 200 amperes for 30 seconds.

Is the switch ignition-protected for use on gasoline-powered boats?

Yes, this switch is ignition-protected. It meets SAE J1171, UL 1500, and ISO 8846 standards, making it safe for installation on boats equipped with gasoline engines.

Which types of boats are best suited for this battery switch?

This switch is specifically designed for marine applications requiring high power, proven reliability, and low heat generation, such as on boats equipped with inboard gasoline or diesel engines.

What material are the terminal studs made of and what are their dimensions?

The terminal studs are made of tinned copper, ensuring maximum conductivity and corrosion resistance. They have a size of 3/8"-16 (M10) and a length of 22.22 mm (7/8") to accept multiple cable lugs.

What is the maximum operating voltage of this switch?

The maximum operating voltage of this switch is 32 V DC.

What are the certifications and compliance standards for this product?

This product meets ABYC requirements for battery switches, is UL listed (UL 1107 for electrical power switches), and complies with external ignition protection standards UL 1500 and SAE J1171. It is also CE and ISO 8846 certified.

Is the switch waterproof?

Yes, the switch is rated IP66, meaning it is protected against powerful water jets.

What is the intermittent current rating of this switch?

The switch has an intermittent current rating of 600 amperes for 5 minutes, in accordance with UL 1107.

Where should I install this battery switch?

It is recommended to install the switch in an easily accessible location near the batteries.

What are the possible mounting types for this switch?

The switch housing design allows for surface mounting or rear-panel mounting.

What is the recommended cable gauge for this switch to meet its rated values?

To ensure the switch fully meets its rated values, 4/0 AWG (120 mm²) cables must be used.

How to connect battery cables to the switch terminals?

To meet the rated value, a 4/0 AWG (120 mm²) cable must be connected to each battery terminal and two 4/0 AWG (120 mm²) cables to the common terminal. Battery cable lugs must be secured under the locking washer and nut.

What is the recommended torque for the switch terminal studs?

The recommended torque for the switch terminal studs is 15.82 N·m (140 in-lb). For battery cable terminals secured under the nut, the torque is 24.86 N·m (220 in-lb).

What precautions should I take before installing the battery switch?

Before installation, it is essential to disconnect the battery's positive terminal. It is also strongly recommended to consult a marine electrical professional to ensure correct and secure wiring.

How to wire the AFD (Alternator Field Disconnect) function?

To wire the AFD function, cut the wire running from the alternator to the voltage regulator. Connect one end to terminal F1 and the other end to terminal F2 of the switch.