Zondas HDS-12 PRO su 3-1 tipo Aktyviosios vaizdavimo HD sonde

The Lowrance HDS-12 PRO fishfinder has a 12-inch multitouch screen. It provides a resolution of 1280 x 800 pixels, ensuring clear and detailed display of fishfinder and navigation data.

The Active Imaging HD 3-in-1 Active Array supplied with this bundle integrates several advanced technologies for fish and underwater structure detection:

Traditional CHIRP sonar: For excellent target separation.DownScan Imaging HD: Provides very high-resolution images of what is directly below the boat.SideScan Imaging HD: Delivers detailed views of structures and fish to the sides of the boat.

The HDS-12 PRO fishfinder can handle up to 1 kW RMS power for traditional CHIRP sonar. This enables efficient detections even in deep waters without requiring an external transducer module.

Yes, the HDS-12 PRO display is designed to withstand marine environments. It features an IPX6 and IPX7 waterproof rating, protecting it against powerful water jets and temporary immersion.

The weight of the HDS-12 PRO display, without its mounting bracket or cables, is 2.61 kg (5.76 lb).

Yes, the HDS-12 PRO features a multi-touch screen. You can interact with the unit by tapping, pinching to zoom, and swiping the display, in addition to using the physical buttons for quick control in all conditions.

The HDS-12 PRO fishfinder is designed to operate across a wide temperature range. Its operating temperature spans from -15°C to 55°C (5°F to 131°F).

To protect the device, install a 5 Amp fuse on the positive power line when connecting to the boat's electrical circuit.

You have two main options for installing the HDS-12 PRO display:

Bracket mounting: Use the supplied bracket to attach it to a flat surface on your console.

The maximum power consumption of the HDS-12 PRO is 48 Watts, which corresponds to a current of 3.6 Amperes at a voltage of 13.8 V DC.

To avoid any interference with your navigation compass, the HDS-12 PRO display must be installed at a minimum distance of 65 cm (2.1 ft) from it.

Yes, the HDS-12 PRO is fully compatible with Lowrance radar antennas. It features two Ethernet ports that allow direct connection to a radar, as well as other network devices such as a second display.

Yes, the device has an NMEA 2000 port (Micro-C connector). This allows you to easily integrate it into your existing network to share data with other compatible devices, such as engine sensors, an autopilot, or a VHF radio.

Yes, thanks to its two Ethernet ports, you can connect the HDS-12 PRO to other compatible multifunction displays. This allows you to share fishfinder data, chartplotter data, radar data, and waypoints between the different displays.

Yes, the HDS-12 PRO is designed to be the core of an advanced fishing system. It is fully compatible with Lowrance ActiveTarget and ActiveTarget 2 real-time fishfinder systems, which connect via the Ethernet network.

Yes. The HDS-12 PRO acts as a true control center and offers extensive connectivity. It is compatible with NMEA 2000 and NMEA 0183 networks and has two Ethernet ports. This allows you to connect it easily to a radar, an autopilot, an electric bow thruster, or share data with other multifunction displays on board. It also integrates Wi-Fi and Bluetooth 5.2.

The HDS-12 PRO fishfinder operates on a 12 V DC electrical system (accepted range: 10.8 to 18 V DC). Its maximum power consumption is 48 W (approximately 3.6 A at 13.8 V). For a safe installation, the positive power line must be protected with a 5 A fuse or equivalent circuit breaker. The unit is protected against reverse polarity and temporary overvoltage.

The HDS-12 PRO can be installed in two ways: flush-mounted on the dashboard (panel mounting) or on a bracket for flexible orientation. During installation, maintain a safety distance of 65 cm from the magnetic compass. Regarding waterproofing, the unit is certified IPX6 and IPX7, meaning it withstands heavy water spray and temporary immersion, making it ideal for exposed marine use.