Šoninis žiburys 1MN - laivas <12m - kairysis (raudona 112,5°)

This is a navigation light specifically designed for the port side (left) of the boat. It emits a red light over a 112.5° arc and is part of the Mantagua Tiny range, known for its lightweight and compact design.

The Mantagua Tiny lateral light has a luminous range exceeding 1 nautical mile (NM), making it compliant with safety requirements for coastal and inland navigation.

This navigation light is suitable for boats under 12 metres (39 feet).

The Mantagua Tiny port side lateral light requires a regulated 12V DC power supply.

The light dimensions are: total height of 72 mm (30 mm for the light body and 42 mm for the base) and a diameter of 40 mm.

Yes, it is fully epoxy-resin encapsulated, providing IP67 waterproofing and enhanced vibration resistance, ensuring reliable operation in the most demanding marine environments.

The operating temperature range of this light is between -20°C and 50°C.

This port side light emits a red light, in compliance with maritime signaling standards.

The light is diffused over a 112.5° arc, which meets the required signalling for a port-side light.

The light intensity of this light exceeds 1.1 candela, ensuring visibility at 1 nautical mile.

For installation, you must use hose clamps (for the TINY BALCON version). The cable must be passed through the light base, then the base is secured to the light using the 2 supplied screws. Finally, the light is attached to the mast with 4 mm stainless steel screws, also supplied.

Stainless steel screws of 4 mm diameter are provided for securing the light to the mast, ensuring resistance to marine environments.

You must position the boat symbol on top of the light facing forward to ensure correct and regulation-compliant signaling.

A minimum cable cross-section of 0.5 mm² is recommended for power supply wiring to ensure a reliable electrical connection.

For wiring, the blue wire must be connected to the negative terminal (-) and the white wire to the positive terminal (+12V DC).

No, the light must be assembled onto its mount manually; an electric drill is not required for this step.

No, this specific model (ref. 00133) is a port-side navigation light (red 112.5°) and is designed solely for this position. For other positions such as starboard (green) or stern (white), other models from the Mantagua Tiny range are available.