Black Box Fusion® BB100

The Fusion BB100 is designed for marine environments where space is limited. It provides a discreet audio entertainment solution with hidden installation, freeing up dashboard space while delivering 200 W of audio power.

The Fusion BB100 black housing has approximate dimensions of 155 mm (width) × 60 mm (height) × 94 mm (depth).

To achieve IPX3 protection rating and optimal cooling of the heat sink, the housing must be mounted on a vertical surface with the connectors pointing downward. It can be mounted on a horizontal surface, but this may not guarantee IPX3 protection.

The USB port is compatible with Apple devices (iAP2), Android devices (AOA) and USB sticks for MP3 file playback. It is important to note that the system is not compatible with Android devices in MTP or PTP mode.

No, the Fusion BB100 is DAB+ ready but requires an external Fusion DAB module (MS-DAB100A), which is not included, to receive DAB stations.

The Fusion BB100 supports two independent audio zones thanks to its Multi-Zone™ technology.

The Fusion BB100 requires an input voltage of 10.8 to 16 VDC with negative ground.

The total musical output power of the Fusion BB100 is 200 W, with 50 W per channel.

Yes, the Fusion BB100 can be controlled via a compatible multifunction display (MFD) thanks to its NMEA 2000 interface and Fusion-Link technology.

The black housing of the Fusion BB100 has an IEC 60529 ingress protection rating of IPX3.

The front panel of the wired remote has an IEC 60529 ingress protection rating of IPX7, while the rear has an IPX3 rating.

A 15 A fuse is recommended for the Fusion BB100.

The operating temperature range for the Fusion BB100 is 0 to 50°C (32 to 122°F).

No, the Fusion BB100 is not compatible with Android devices connected in MTP (Media Transfer Protocol) or PTP (Picture Transfer Protocol) mode. For connection, consult your Android device’s instructions for AOA (Android Open Accessory) mode if required.

Yes, the Fusion BB100 comes with a wired IPX7 remote control that also includes the Bluetooth receiver.

The safe distance from the compass for the Fusion BB100 is 15 cm (5.91 inches).

The Fusion BB100 AM/FM tuner supports the following frequency ranges:

FM: 87.5 to 108 MHz (Europe and Australasia), 87.5 to 107.9 MHz (USA), 76 to 95 MHz (Japan).

AM: 522 to 1620 kHz (Europe and Australasia), 530 to 1710 kHz (USA), 522 to 1620 kHz (Japan).

Yes, the Fusion BB100 has pre-amplified RCA outputs (left, right) for each audio zone and a mono subwoofer output for Zone 1, allowing the addition of external amplifiers and expansion of your audio system.

Main wiring connections include:

Power (+): Red wire (or yellow on some harnesses) to be connected to a 12 V DC power source capable of supplying 15 A.

Ground (-): Black wire to be connected to the negative ground of the power source.

Amplifier ON: Blue wire to activate an optional external amplifier.

Mute: Brown wire to mute or switch to AUX input when activated.

Speakers: Separate connections for zone 1 and 2 speakers (left/right, positive/negative).

The Bluetooth wireless range of the Fusion BB100 is approximately 10 meters.

The initial limited warranty for the Fusion BB100 product is twelve (12) months from the date of purchase of the product.