MultiPlus C 12/1600/70-16

The Victron Energy MultiPlus C 12/1600/70-16 is a compact and versatile device that combines three essential functions:

A pure sine wave inverter to convert the DC current from batteries into AC power.A sophisticated adaptive battery charger to optimize charging and battery lifespan.A ultra-fast AC transfer switch to switch between power sources without interruption.It is designed for marine applications, recreational vehicles, and standalone energy systems.

The MultiPlus C 12/1600/70-16 delivers a continuous output power of 1600 VA (equivalent to 1300 W) at 25°C. Its peak power is 3000 W.

The integrated adaptive battery charger has a capacity of 70 A, enabling efficient and optimized charging of your batteries.

This model is compatible with 12 V DC battery systems. It accepts an input DC voltage range from 9.5 V to 17 V.

Yes, the MultiPlus C 12/1600/70-16 includes a UPS (Uninterruptible Power Supply) function. In case of a power outage or AC source failure, the inverter takes over in less than 20 milliseconds, ensuring uninterrupted AC power supply for connected devices.

The PowerAssist function allows the MultiPlus to supplement the capacity of a limited AC source (such as a generator or shore power). If the power demand exceeds the capacity of the AC source, the MultiPlus uses battery energy to provide the additional power required. When the load decreases, the excess power is used to recharge the battery.

The PowerControl function allows you to set a maximum current that the MultiPlus can draw from a limited AC source (such as a shore power outlet or a generator). The device takes into account other power consumers and only uses the 'excess' current for battery charging, thus preventing overloading of the AC source.

The adaptive battery management system, microprocessor-controlled, can be adjusted for various battery types, including lead-acid batteries (flooded, gel, AGM) and lithium-ion batteries. The adaptive function automatically adjusts the charging process to battery usage.

Yes, in addition to the main DC terminal that can provide the full output current, there is a second output. This output is specifically intended for charging a starter battery and is limited to 4 A, with a slightly lower output voltage.

The MultiPlus C 12/1600/70-16 comes with a temperature sensor. This sensor automatically reduces the charging voltage when the battery temperature rises. This feature is crucial to prevent overcharging and desiccation of batteries, especially maintenance-free batteries, thereby extending their lifespan.

The maximum efficiency of the MultiPlus C 12/1600/70-16 inverter reaches 93%, ensuring optimized energy conversion and minimized losses.

Yes, the MultiPlus C 12/1600/70-16 is perfectly suited for solar energy applications. It can be used in both standalone systems and grid-connected systems, allowing excess solar energy to be stored in batteries and released when needed.

The adaptive charger uses a 4-stage charging algorithm to optimize battery health and lifespan:

Bulk (bulk charge): Charges the battery at its maximum current.
Absorption: Maintains a constant voltage to fully charge the battery, with a variable duration depending on the initial discharge level.
Float (float charge): Keeps the battery at a lower float voltage to compensate for self-discharge.
Storage: Reduces float voltage to minimize gassing and corrosion when the battery is unused for 24 hours, with weekly equalization.

Models with a 16 A transfer capacity, such as the MultiPlus C 12/1600/70-16, are equipped with a programmable relay. By default, it is configured as an alarm relay but can be programmed for various other applications, for example as a start relay for a generator.

The 'Storage' mode activates when the battery has not undergone discharge for 24 hours. In this mode, the float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is raised to the absorption level to 'equalize' the battery, preventing electrolyte stratification and sulfation, which are major causes of premature battery failure.

Before any installation, it is imperative to read the provided manual. General precautions include:

Always disconnect AC power and the battery before any work. Ensure the device is continuously grounded, as it is a Class I safety device. Verify that connection cables are equipped with appropriate fuses and circuit breakers. Never use the product in environments where gas or dust explosions could occur. All maintenance must be performed by qualified personnel.

The MultiPlus must be installed in a heat-resistant environment with ample free space around the unit for ventilation. It is critical to ensure that ventilation openings are not obstructed and that no chemicals, plastic parts, curtains, or other textiles are located in close proximity to the equipment.

Yes, the MultiPlus C 12/1600/70-16 is a Class I safety device. Its AC input and/or output terminals must have continuous grounding for safety. An additional grounding point is also located outside the product.

Yes, it is possible to configure three units for a three-phase output. Additionally, up to 6 sets of three units can be connected in parallel. This allows for an inverter power of up to 45 kW / 54 kVA and a charging capacity of over 1000 A.

Yes, the MultiPlus is supplied ready for use, but several methods allow you to modify its settings:

The most important settings can be modified simply using DIP switches. All settings (except the multifunctional relay) can be modified with a VE.Net panel. All settings can be modified using a PC and free software downloadable from the Victron Energy website.