Platý světlomet paluby – 3NM – Červené levé bok – 112,5°

This Mantagua navigation light has a luminous range of 3 nautical miles (3 NM).

The electrical consumption of this deck light is a maximum of 3.2 Watts.

This light is specifically designed to be installed on the port side of the vessel, emitting a red light.

This port-side light has a visibility angle of 112.5°.

This deck light has an IP67 waterproof rating, ensuring resistance to temporary immersion and dust.

The operating temperature range for this Mantagua light is from -10 °C to +65 °C.

This navigation light must be mounted on a horizontal surface. The light's axis of symmetry must be parallel to the vessel's axis.

General installation steps are as follows:

Separate the base from the light body by removing the 3 socket head screws. Drill through the cable gland in the base and feed the power cable through. Secure the base to a horizontal surface using 2 M3 screws (not supplied), applying silicone sealant under the base for waterproofing. Connect the stripped wires from the cable to the terminal blocks inside the light using the supplied red crimp connectors. Apply silicone sealant inside the cable gland cavity and over the mounting screw heads. Reattach the light body to the base and tighten the 3 socket head screws.

No, the M3 mounting screws required for the base are not included with the light.

Yes, it is strongly recommended to coat the underside of the base with silicone sealant before final installation, as well as the inside of the cable gland cavity and the heads of the base mounting screws, to ensure perfect watertightness.

A 3 mm Allen key is required to remove the three socket head screws and separate the base from the housing of the light.

No, there is no specific polarity to respect for the electrical connection of this light.

This light is designed for mounting on a horizontal surface. For side mounting (vertical surface), a specific stainless steel bracket (part number CCMAFF00009 from Mantagua) is required and is not included with the light.

This light is compatible with a supply voltage of 9 to 30 Volts DC (direct current) only.

This light is compatible with 9 to 30 Volts DC shipboard electrical systems. Verify your system voltage to ensure compatibility.

This light is suitable for vessels requiring a port navigation light with a 3 nautical mile range, in compliance with current maritime regulations for this range.

This Mantagua navigation light comes with a 2-year manufacturer warranty.