Hydraulické lineární válce typu 3 - 24V

The Raymarine M81203 hydraulic linear actuator is designed to operate on a 24 V power supply. It is a Type 3 model.

Installing the M81203 actuator requires a very sturdy mounting structure capable of withstanding the generated thrust levels. It is essential that the vessel's structure, as well as the tiller arm or rudder quadrant, can resist peak thrust levels. In some cases, a specially reinforced frame may need to be built to mount the drive.

Yes, absolute cleanliness is essential when handling hydraulic systems. Even the smallest dust particle could prevent the check valves in the steering system from functioning properly, which could reduce performance and potentially cause oil leaks.

The Raymarine M81203 hydraulic linear actuator is a key component for SPX autopilot systems. It is compatible with various Raymarine route computers.

In case of failure, the cylinder is equipped with a quick-release tab (red tab). To release the cylinder, pull this tab to release the R-clip, then manually lift the drive unit to disengage it from the tiller shaft and the steering gear.

The Type 3 (M81203) linear hydraulic ram is distinguished from Type 2 rams (such as the E12207 in 12V or E12208 in 24V) by its ability to handle higher rudder loads. This makes it suitable for larger vessels or specific applications requiring substantial thrust force.

Yes, Raymarine equipment and accessories, including the M81203 actuator, comply with the relevant electromagnetic compatibility (EMC) regulations for use in recreational marine environments. Proper installation is required to ensure EMC performance is not compromised.

Raymarine recommends an installation performed by a certified Raymarine installer. A certified installation ensures enhanced warranty coverage. For further details, please contact your Raymarine dealer and refer to the separate warranty document provided with the product.