Sestava rotoru a spojky (clutch rotor assy) N007

This clutch is specifically designed to be compatible with the Raymarine Type 1 and Raymarine Type 2 rotary power units. It is not compatible with other models or types of power units.

A replacement is generally necessary if you observe one or more of the following symptoms:

The autopilot 'slips' and fails to maintain course.Engagement or disengagement of the autopilot is noisy or does not occur correctly.The autopilot no longer engages at all, even if the electronics appear to be working.You feel abnormal resistance on the helm when the autopilot is disengaged.

Yes, the clutch rotor assembly N007 is an original spare part manufactured by Raymarine. Using an official part ensures perfect compatibility and optimal performance for your equipment.

The operation is simple:

When you engage the autopilot, an electrical voltage is sent to the clutch. This electromagnet locks, making the motor integral with the steering system. When you disengage the autopilot, the current is cut off. The clutch releases, offering no resistance and allowing you to steer manually.

Replacing the clutch requires basic mechanical skills and some care. You need to disassemble part of the power unit to access the part. If you are not comfortable with this type of work, it is recommended to have a qualified technician perform the replacement.

No highly specific tools are generally required. However, you will need a basic set of mechanical tools such as wrenches, screwdrivers, and potentially circlip pliers, depending on the exact assembly of your power unit.

No, absolutely not. This clutch is designed for a rotating power unit, which drives the rudder via a chain and pinion. Linear actuator autopilots have a completely different clutch system.

Continuing to use a faulty clutch means you cannot rely on your autopilot. The steering function will either be inoperative or unreliable, which can pose safety issues, particularly with a reduced crew or during long offshore passages.

Yes, this is an essential precaution. Before any work on the power unit, you must absolutely cut off the autopilot's power supply at the circuit breaker or electrical panel to prevent any risk of short-circuit or accidental motor activation.

Yes, the clutch is an electromagnet. It is powered by two electrical wires. When replacing it, you will need to disconnect the wires from the old clutch and reconnect those of the new one.

The term "clutch rotor assy" (assembly) refers to a pre-assembled unit that includes both the clutch (the electromagnetic part) and the rotor (the moving part that transmits motion). You receive the complete part for replacement.