Točivý mechanismus T2-24V

The Raymarine T2-24V rotary drive (M81137) is designed for sailboats equipped with chain and pinion steering systems. It is suitable for boats with a maximum displacement of 20,000 kg (44,000 lb).

The Raymarine T2-24V rotary drive (M81137) delivers a maximum output torque of 34 Nm (300 lb.in). Its maximum shaft speed is 33 rpm.

The Raymarine Rotary T2-24V (M81137) requires a 24V power supply. Its typical average power consumption is between 72 and 120 W.

This actuator is designed to work with steering systems that can be operated from the helm via a chain and sprocket. This includes cable and push-pull rod steering systems.

The dimensions of the Raymarine T2-24V (M81137) rotary drive are as follows:

Length: 274 mm (10.8 in)
Height: 195 mm (7.7 in)
Mounting length: 256 mm (10 in)
Mounting foot: 60 mm x 60 mm (2.4 in x 2.4 in)

The training unit can be mounted on a vertical or horizontal surface. The mounting bracket can be rotated 90 degrees to fit the available space. It is crucial to secure it to a solid structure on the boat capable of withstanding the significant forces generated by the device. The unit must be installed in a dry location, protected from bilge water, as it is not waterproof. It is also recommended to ensure the device remains accessible for future maintenance.

The components supplied with the Raymarine T2-24V (M81137) rotary drive are:

The rotary driveThe mounting bracketThree spacing shimsFor a complete installation, additional parts are required, including:

Appropriate mounting bolts (M12 stainless steel)Lock washers or lock nutsSuitable pins and set screws for the drive and steering systemThread-locking compoundA suitable drive chainSuitable electrical cables and connectors for the drive motor and clutch

To register your new Raymarine M81137 rotary drive and benefit from the full warranty, you can do so online on the official Raymarine website at the following address: www.raymarine.com.