Přípojná lišta 5 cest 400 A pro pojistkové držáky

The 5-way 400A BEP DC busbar is an electrical component designed to interconnect up to five adjacent DC devices, such as fuse holders, in marine installations and recreational vehicles. It is specifically optimized for BEP's Pro Installer system, enabling organized wiring and space-saving.

This bonding bar is made from high-purity tinned copper. This material choice ensures maximum electrical conductivity and excellent resistance to corrosion, which is essential for marine environments.

The busbar can support a continuous current of 400 amperes across all five positions. If two adjacent positions are linked, the continuous current capacity can reach 650 amperes, allowing for handling higher electrical loads.

You can connect up to five adjacent DC devices to this bus bar, thanks to its five separate channels.

The main advantages include significant wiring optimization, substantial space savings in installation, maximum electrical conductivity thanks to tinned copper, and increased corrosion resistance, extending the lifespan of the installation.

The overall dimensions of the tiller extension are 8.8 inches in length by 1 inch in width. These compact dimensions promote streamlined and optimized installations.

Yes, absolutely. It is made from high-purity tinned copper, a material chosen specifically for its high corrosion resistance, making it ideal for demanding marine environments.

It simplifies wiring by consolidating connections from multiple electrical components, such as fuse holders, into a single point. This reduces the need for long and complex individual cables, minimizing clutter and making wire management easier.

The spacing between the mounting holes or connection studs on this tie bar is 2 inches.

This busbar is primarily designed for DC electrical installations in marine applications and recreational vehicles, where reliability and space optimization are critical.

The connecting bar is typically installed by securing it directly to the rear of adjacent components, such as fuse holders or battery switches, using 3/8-inch connection studs. Ensure all connections are clean and properly tightened.

For installation, you will need appropriate tools to tighten nuts on 3/8-inch studs, such as a socket wrench or a corresponding open-end wrench. It is also recommended to use a screwdriver if the components to be connected require additional fasteners.

The tie bar is designed for 3/8 inch studs, which is a standard size for many high-current electrical connections in marine applications.

Yes, the design of the tie rod allows for some flexibility in its mounting orientation, provided it can be securely fastened to adjacent components and wiring access is maintained. However, it is always best to follow the manufacturer's specific recommendations for optimal installation.

Yes, it is very important to tighten all electrical connections to the torque recommended by the component manufacturer (fuse holders, etc.) to ensure good electrical conductivity and prevent loosening due to vibrations. Over-tightening or insufficient tightening can lead to performance or safety issues.

This tie bar is specifically designed to integrate with BEP's Pro Installer system. It is therefore compatible with fuse holders and other products in the Pro Installer range that use 3/8-inch studs with a 2-inch spacing.

Although it is optimized for the BEP Pro Installer system, this busbar can be used as a high-current busbar in various applications. It is compatible with any electrical component featuring 3/8-inch studs and a 2-inch spacing between connection points.

Yes, this tie bar is designed to handle direct current and is compatible with 12V, 24V and other common DC voltages in marine and recreational vehicle applications, provided the current capacity of 400A (or 650A) is not exceeded.

It is not recommended to modify or cut the bonding bar. Any modification could compromise its structural integrity, electrical conductivity, and rated current capacity, potentially voiding its performance and safety.

Yes, in addition to marine applications, this busbar is also fully suitable for use in recreational vehicles (motorhomes, caravans) or other automotive applications requiring reliable DC power distribution and space savings, provided the current and stud size specifications are met.