Jističová deska 6 pozic, pod palubou

The BelowDeck 6-circuit Blue Sea 4352-BSS breaker panel is a compact and reliable solution for protecting and switching 12V DC marine electrical systems. It is designed for under-deck installation and allows management of up to six separate circuits.

This circuit breaker panel is designed to manage up to six (6) separate circuits.

The Blue Sea 4352-BSS circuit breaker panel operates at a nominal voltage of 12V DC.

The maximum continuous current capacity for the entire panel is 45 amperes (A).

Each circuit breaker integrated into the panel is rated at 15 amperes (A).

Yes, circuit breakers include red LEDs that light up to indicate the "ON" (on) state, making operation easier in low-light conditions.

The panel surface is made of Polycarbonate/ABS. This material is UV-stabilized, flame-retardant, and corrosion-resistant, ensuring durability in marine environments.

Yes, the panel is supplied with a set of 15 circuit labels in square format, which are easy to replace.

The panel has a low profile with a depth of 44 mm (1.75"), which simplifies its installation in confined spaces.

No, this panel is labeled "BelowDeck" and must be installed in a dry location. It is not designed for direct exposure to the elements or moisture.

This panel must be installed in a dry location, below deck, and not where flammable vapors could accumulate (e.g., engine room or propane locker).

The overall dimensions of the panel are 114 mm (width) x 165 mm (height) x 44 mm (depth), i.e. 4.5" x 6.5" x 1.75".

The panel is supplied with #6 x 5/8" stainless steel mounting screws.

The recommended maximum torque for mounting screws is 1.13 N·m (10 in-lb).

The maximum tightening torque for terminal studs is 2.25 N·m (20 in-lb).

Electrical load connections are made via 0.25" quick-connect male terminals located on each circuit breaker.

For connecting the main power supply (positive and negative), M5 (#10) ring terminals are required.

To reset a circuit breaker, you must first press the switch to the "OFF" position, then return it to the "ON" position.

No, this circuit breaker panel is specifically designed to work with 12V DC nominal marine electrical systems and is not compatible with 24V DC systems.