Mini sběrnice 100 A - 5 pólů s víkem

A busbar is a common connection point for multiple electrical cables, allowing centralized distribution of current or grounding. The Blue Sea 2314B-BSS model is a mini busbar designed to group up to five conductors, simplifying wiring and maintenance of marine electrical systems, particularly in confined spaces.

This Blue Sea 2314B-BSS mini busbar has a rated capacity of 100 amperes, making it suitable for distributing power in marine auxiliary circuits.

The Blue Sea 2314B-BSS mini busbar has 5 connection terminals, allowing up to five conductors to be grouped.

Yes, this mini busbar is supplied with a protective cover. This cover helps isolate connections, prevent accidental short circuits, and protect against water splashes or impacts.

Using a busbar with a cover provides several advantages, including increased safety by protecting connections from accidental contact and short circuits. The cover also helps protect against marine environments (splashes, dust) and gives a cleaner finish to the electrical installation.

Yes, this busbar is specifically designed for marine applications. It complies with the requirements of the European Directive 94/25/EC on recreational craft and with ISO 8846, ensuring protection against ignition of surrounding flammable gases—a critical safety criterion for offshore use.

The connection terminals on this mini busbar use 8-32 screws.

This mini busbar is ideal for small sailboats, rigid inflatables, or for managing secondary circuits on larger vessels. Its compact design makes it particularly suitable for installations where space is limited.

Yes, the Blue Sea 2314B-BSS mini busbar can be used interchangeably to centralize negative connections (grounds) or positive power feeds, depending on your electrical installation requirements.

Blue Sea Systems busbars are typically made with tinned copper conductors for excellent conductivity and corrosion resistance in marine environments, and a reinforced polycarbonate base for durability and insulation.

Installing this mini busbar requires securing it firmly to a flat surface using screws (not supplied). Once installed, the auxiliary circuit cables can be connected to the terminals using appropriate ferrules, then the protective cover can be snapped into place.

To connect the cables, you will need basic tools such as a screwdriver suitable for 8-32 screws, and a crimping tool to properly secure the terminals on your cables. It is recommended to use ring or fork terminals that match the size of the terminal screws.

This busbar is designed to support a maximum voltage of 48 Volts DC (direct current), which is standard for most marine electrical systems.

Yes, due to the use of tinned copper for the conductors and corrosion-resistant plastic materials for the base and cover, this busbar is designed to provide good resistance to corrosion in a marine environment.

It improves safety by organizing connections in a structured way, reducing the risks of messy wiring and short circuits. The protective cover also insulates live terminals. Additionally, its compliance with ISO 8846 ensures protection against ignition of flammable gases.

Although designed for the marine environment, its robustness and resistance to moisture also make it suitable for automotive, RV, or other vehicles requiring reliable and protected electrical distribution, within the limits of its current and voltage specifications.

Yes, its "Mini busbar" designation indicates a compact design. It is specifically designed for installations where space is limited, making it easy to integrate into electrical panels or tight compartments on boats.

To ensure a reliable connection, it is crucial to use the correct size of terminals, to crimp them properly onto the cables, and to tighten the terminal screws (size 8-32) firmly without overtightening to avoid damaging the threads. Using cables with an adequate cross-section for the current carried is also essential.

Yes, this product is certified compliant with European Directive 94/25/EC on recreational craft (amended by 2003/44/EC) and ISO 8846 standard. This compliance ensures protection against ignition of surrounding flammable gases, a critical aspect for safety in marine environments.

The main difference lies in the number of terminals and the physical size. The 2314B-BSS model is a "mini" busbar with 5 terminals, ideal for compact installations or auxiliary circuits. Larger models, such as the 2312 (which has 20 terminals according to the product description), are designed for more extensive electrical distribution needs and require more space.