Přepínací panel jističů odolný proti vodě – šedý, 4 pozic

This 4-position watertight circuit breaker panel is designed for electrical distribution in exposed marine environments. It provides a switch function, power-on indication, and overcurrent protection for each circuit.

Yes, the front panel is IP66 compliant when mounted with its gasket, meaning it is protected against powerful water jets. It is designed for applications requiring protection against water and external elements, such as flybridges or open cockpits.

This panel is a 4-position model, allowing you to control and protect up to four separate electrical circuits.

Each position includes a 15A illuminated circuit breaker, providing overcurrent protection for each individual circuit.

The panel supports a maximum total DC current of 45A at a nominal voltage of 12V DC.

This circuit breaker panel is designed to operate at a nominal voltage of 12V DC.

The panel surface is made from polycarbonate/ABS, a UV-stabilized, flame-retardant, and corrosion-resistant material, ensuring durability in marine conditions.

To reset a circuit breaker, you must first press the OFF position, then the ON position.

The panel dimensions are 119.38 mm wide, 127.76 mm high, and 44.45 mm deep. Its low profile makes installation easier in tight spaces.

Mounting centers are 104.90 mm in width and 113.03 mm in height.

Connections for circuit breakers are 1/4" male quick-connect terminals.

A #10 (5 mm) ring terminal is required for the main positive power connection.

The panel is supplied with stainless steel mounting screws #6 x 5/8".

Yes, a set of 15 common square circuit labels is included in the packaging. They are easy to replace.

Yes, the panel is fitted with an EPDM gasket and the circuit breakers have silicone waterproof caps to prevent water ingress.

Yes, its dimensions and mounting options comply with industry standards, making it easy to replace in an existing application.

No, powering all the panels is straightforward and requires a two-wire connection with #10 ring terminals.

No, the common busbar is sold separately and is not included with this panel.

The maximum tightening torque for mounting screws is 1.13 N·m (10 in-lb).

The maximum torque for circuit breaker terminals is 2.25 N·m (20 in-lb).