Montáž na Jack Plate pro snímač RV-100 RealVision 3D

The Raymarine A80480 mount is designed to install the RV-100 RealVision 3D transom-mount transducer on the side of a jack plate. It allows precise adjustment of the transducer height to optimize performance by reducing turbulence and aeration, ensuring clearer, interference-free sonar imaging.

Using this setup provides several advantages for optimizing sonar performance. It allows precise adjustment of the transducer depth, which is crucial for minimizing turbulence and aeration generated by the propeller or hull. This results in improved image quality for SideVision, DownVision, and RealVision 3D functions, with increased definition and optimal coverage of the seabed and underwater structures.

The package for the mounting bracket for the Jack Plate RV-100 (reference A80480) contains the following items:

One Jack Plate bracket (Jack-plate bracket)
Four mounting fasteners (Mounting fixings)
Two bracket fasteners (Bracket fixings)
The necessary installation documentation

Unlike traditional transom mountings or hull/transom brackets (such as the A80479), the RV-100’s jack plate mounting allows precise adjustment of the transducer height. This flexibility is critical for reducing turbulence and aeration caused by the propeller or hull, resulting in improved sonar image quality. Other brackets are typically fixed or offer fewer adjustment options.

This mount optimizes the performance of SideVision, DownVision, and RealVision 3D images by enabling precise positioning of the transducer. Proper positioning minimizes cavitation and turbulence, ensuring better definition and optimal coverage of the seabed and underwater structures, even on high-speed vessels.

The mounting bracket for the Raymarine A80480 Jack Plate is specifically designed for the Raymarine RV-100 RealVision 3D transom-mounted transducer (reference A80464).

No, this mount is specifically designed for the RV-100 RealVision 3D transducer and is not compatible with other Raymarine transducer models.

The mount is designed to be installed on the side of a jack plate. However, it is strongly recommended to consult the manufacturer of your jack plate before drilling additional holes to ensure a secure and functional installation and to verify specific compatibility.

Yes, for certain installations, a Jack Plate RV-100 spacer kit (reference A80482), sold separately, may be required. This kit ensures sufficient clearance between the transducer and the movement of the "jack plate".

For optimal performance, the transducer must be installed in an area with minimal turbulence and aeration. It is recommended to:

Mount the transducer on the side of the jack plate.Ensure the transducer does not interfere with the jack plate’s operation.Always mount the transducer on the side of the propeller that rotates downward to minimize cavitation.Position it at an appropriate distance from the propellers to avoid the wake.Avoid areas of turbulence caused by steps, ribs, rows of rivets, and strakes.The optimal location may vary depending on hull type and jack plate mounting position.

Additional holes may need to be drilled in your jack plate if the existing mounting points are insufficient. Before drilling, it is essential to consult the jack plate manufacturer to ensure the chosen location will not interfere with its operation.

You must use only neutral-cure polyurethane sealants of marine grade. Do NOT use sealants containing acetate or silicone, as they can damage plastic parts.

It is important to route the cable to its final destination before attaching the locking clamp. The supplied locking clamp must be attached to the cable connector to ensure a secure connection. A specific tool is provided to help install the split ring of the clamp without damaging it.

The Jack Plate RV-100 spacer kit (reference A80482) is not always required, but may be necessary for certain installations. It is used to provide sufficient clearance between the transducer and the movement of the "jack plate", or to position the transducer further away from the propellers if needed. This kit is sold separately.

Raymarine recommends installation by a Raymarine-certified installer. Certified installation may qualify for enhanced warranty benefits. However, installation instructions are provided if you choose to install it yourself.

During installation, ensure the vessel's power supply is switched off. Never connect or disconnect equipment while it is powered unless explicitly instructed otherwise. Use only high-quality marine sealants and test the transducer only in water to prevent overheating. Do not overtighten bolts to avoid damaging the transducer.

An installation certified by an authorized Raymarine installer may entitle you to an enhanced product warranty. For further details, it is recommended to contact your Raymarine dealer and consult the separate warranty document provided with your product.

You can register your warranty on the Raymarine website, usually at www.raymarine.com/warranty. Registration allows you to benefit from applicable warranty terms.