Balení 2 ks průchozích sond z nerezové oceli RVM-412, úhel 12° levobok / pravobok, pro systémy AXIOM2 a RVM1600 (2 x 2 m, kabel Y a prodloužení 8 m)

The Raymarine RVM-412 package is designed to provide detailed and three-dimensional underwater imaging using RealVision Max 3D technology. It allows you to visualize the seabed structure, fish, and submerged objects with improved clarity, which is essential for fishing and navigation.

The RVM-412 transducers are through-hull stainless steel transducers, specifically angled at 12°. They are designed to be installed on port and starboard sides, optimizing RealVision Max 3D sonar performance on hulls with a significant deadrise angle (between 8 and 15°).

The RVM-412 transducers use Sonar RealVision Max 3D technology. This technology delivers underwater imaging in three dimensions, enabling detailed visualization of the seabed and submerged objects.

The inclusion of two transducers, one for port and one for starboard, ensures consistent SideVision and DownVision coverage without dead zones. This setup is particularly beneficial for hulls with significant deadrise angles, guaranteeing optimal signal quality.

The RVM-412 transducers are made of stainless steel, a robust material suitable for demanding marine environments.

This pack is specifically designed for hulls with a high deadrise angle, with a V-angle between 8 and 15°. The 12° tilt of the transducers is optimized for these hull types.

Yes, the RVM-412 pack includes complete wiring: two 2-metre depth sounder cables, a Y-cable for combined connection of the two transducers, and an 8-metre extension.

The RVM-412 transducers are directly compatible with Raymarine AXIOM2 multifunction displays.

Yes, the RVM-412 transducer pack is compatible with the Raymarine RVM1600 fishfinder module.

Yes, the RVM-412 transducers integrate seamlessly into the Raymarine LightHouse 4 ecosystem, ensuring straightforward installation and configuration.

The pack is designed to integrate with the LightHouse 4 ecosystem. It is always recommended to ensure your AXIOM2 display or RVM1600 module has the latest LightHouse software version for optimal performance.

After installation, a RealVision AHRS (Attitude and Heading Reference System) calibration is required. This calibration ensures precise stabilization of the sonar image for optimal visualization.

Typical tools for installing through-hull transducers include a drill, drill bits suitable for hull drilling, wrenches, marine sealant, and cleaning products. Detailed instructions are provided in the installation manual.

The installation involves drilling holes in the hull. For foam-core fiberglass hulls, specific precautions are required to seal the core and prevent water ingress. It is critical to follow the manual's instructions for positioning and drilling.

Yes, antifouling paint can be applied to transducers. It is important to use compatible products and follow the manufacturer's recommendations to avoid degrading the transducer's performance.

The pack includes two 2-metre depth sounder cables, a Y-cable, and an 8-metre extension, providing flexible total length for installation.

The two 2-metre transducers connect to a Y-cable included in the kit. This Y-cable combines the signals from both transducers before routing them to the display or sounder module via the 8-metre extension.

Yes, it is recommended to follow general marine equipment wiring guidelines, particularly regarding cable routing, protection against stress, and shielding to avoid electromagnetic interference (EMC).

After installation, it is recommended to perform a transducer test and AHRS RealVision calibration. The LightHouse 4 system user manual provides instructions for checking sonar data and troubleshooting.

The 12° tilt of the transducers is crucial to compensate for the deadrise angle (V) of the hull. This ensures the sonar beam is directed vertically toward the seabed, even when the boat is stationary or moving, thus providing a precise and stabilized sonar image.