Sada průchozích plastových snímačů Raymarine HV-300 HyperVision levobok a pravobok 12°

Raymarine's HyperVision™ technology uses ultra-high CHIRP frequencies to deliver underwater images with high clarity and detailed resolution. It enables precise detection of submerged structures, fish schools, and seabed features.

These transducers support DownVision, SideVision, and RealVision 3D imaging modes. These modes allow you to obtain a complete and detailed view of what is below and around your boat.

The HV-300 HyperVision™ depth sounders are compatible with Raymarine multifunction displays from the Element and Axiom series.

The HV-300 transducers are through-hull transducers, meaning they are installed directly through the boat's hull. Unlike transom-mount transducers such as the HV-100, through-hull installation ensures laminar water flow around the transducer, reducing noise and interference, which is critical for maintaining signal quality at higher speeds.

The T70448 kit includes two plastic through-hull transducers: one for installation on the port side and one for installation on the starboard side.

For installation, it is imperative to use only a neutral marine-grade polyurethane sealant. It is important to NOT use sealants containing acetate or silicone, as they can damage plastic parts.

No, you must use only water-based antifouling paint. It is crucial NOT to use products containing ketone or copper, as this could affect the product's warranty and performance.

The HV-300 transducers in this pack have a 12° angle. They are optimized for boats with a pronounced deadrise angle, ensuring that the side-scanning beams are correctly oriented for optimal coverage.

No, it is essential to test and use the transducers only when they are submerged in water. Operating them out of water can cause overheating and damage the transducer.

The through-hull installation of HV-300 transducers directly in the hull ensures laminar water flow around the transducer element. This minimizes noise and interference, which is essential for maintaining high signal quality, even at higher boat speeds.

The HV-300 dual-sensor pack includes port and starboard transducers. However, the tools, marine-grade neutral polyurethane sealant, and water-based antifouling paint required for installation are not included and must be purchased separately.

No, the HV-300 HyperVision™ probes are designed to be directly compatible with Raymarine multifunction displays from the Element and Axiom series, which already include the necessary sonar technology. They do not require an additional external sonar module.

Raymarine recommends installation by a Raymarine-certified installer. Certified installation provides enhanced product warranty benefits. For further details, contact your Raymarine dealer.

These transducers are through-hull plastic models.

Yes, the kit is designed for port and starboard installation. This combined positioning with the 12° angle of each transducer is essential for optimal coverage and to fully leverage the SideVision and RealVision 3D imaging modes.

Yes, it is crucial to choose a location that ensures laminar water flow around the transducers to minimize noise and interference. The location must also allow the side-scanning beams to be properly oriented for optimal coverage, especially on hulls with a pronounced keel angle.

The positioning of the transducers on the port and starboard sides is strategic. Combined with the 12° angle of each transducer, this ensures that the side-scan beams are correctly oriented for optimal coverage under and around the boat, especially on hulls with a pronounced keel angle.

To maintain optimal performance of your HV-300 transducers, regular cleaning is required. It is important to follow Raymarine’s specific instructions for transducer cleaning and routine checks to prevent any buildup of debris that could degrade signal quality. Applying water-based antifouling paint is also recommended and should be renewed according to manufacturer guidelines.