[CYCLOPS] Smartlink² 10t capteur d'effort — vue 1

[CYCLOPS] Smartlink² 10t capteur d'effort — vue 2

[CYCLOPS] Smartlink² 10t capteur d'effort — vue 3

[CYCLOPS] Smartlink² 10t capteur d'effort — vue 4

[CYCLOPS] Smartlink² 10t capteur d'effort — vue 5

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 5%

Cyclops Marine

SR13

Smartlink 2 10t load cell

Conçu pour les environnements marins exigeants, le CYCLOPS Smartlink² 10t est un capteur d'effort sans fil en titane (Ti6Al4V) offrant une surveillance précise des charges jusqu'à 10 tonnes.

Il s'intègre via Bluetooth à l'application Smartfittings ou aux écrans compatibles, ou via une passerelle NMEA pour une analyse des données en temps réel.

Livré à l'unité, sans accessoires.

Price excl. import taxesBenefit from the professional rate

$3,168.00 USD

$3,168.00 USD ~~$3,334.00 USD~~

Shipping calculated at checkout.

Prices exclude import taxes (rate varies by item and state). DAP delivery: import taxes are paid on delivery.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Max power consumption	0.0004625
Typical power consumption	0.0004625
Product width	74
Product height	25
Product depth	25
IP rating	IP67
Bus compatibility	Bluetooth,NMEA 2000,NMEA 0183,NKE,UDP,MQTT
Wired network	NMEA 2000,NMEA 0183,NKE,UDP,MQTT
Mounting type	En ligne avec des lignes souples
Certifications	IP67
Linearity	±1%
Sensor output type	Numérique (Bluetooth, NMEA 2000, NMEA 0183, NKE, UDP, MQTT)
Sensor connection type	Sans fil (Bluetooth), Filaire (via passerelle)
Sensor type	Capteur d'effort sans fil
Sensor compatibility	Application mobile Smartfittings (iOS et Android), écrans sans fil Vakaros Atlas 2 et Sailmon, systèmes électroniques de bord (via passerelle)
Data output	Charge en direct, minimum, maximum, moyenne (1, 10, 30 minutes), données GPS, heure locale
Update rate	1 Hz (réglable de 0,1 à 10 Hz)
Operating temperature range	-10 à +40 °C
Working Load Limit	10000 kg
Breaking Load	15000 kg
Max Soft Attachment Diameter	12.4 mm
Measurement Accuracy	±1%
Wireless Protocol	Bluetooth
Battery life	2000 h
Charging Time	1 heures
Product dimensions	93 x 74 x 25 mm
Material	Corps en Titane (Ti6Al4V), boîtier en Acétal
Application Compatibility	Smartfittings (iOS et Android)
Battery Capacity Wh	0.925
Battery Life Low Power Mode	8000
Battery type	Lithium Polymère
Charging method	Induction sans fil
Country Of Manufacture	Royaume-Uni
Display Compatibility	Vakaros Atlas 2, Sailmon
Product Model Identifier	10t
Product range	Smartlink²
Titanium Alloy Grade	Ti6Al4V

Detailed description

Designed for demanding marine environments, the CYCLOPS Smartlink² 10t is a wireless load cell for precise tension monitoring on various rigging elements. With a maximum load capacity of 10,000 kg (10 tonnes), it delivers accuracy within ±1% of maximum working load, ensuring reliable measurements for rigging tuning and safety at sea.

Design and Technical Specifications

The Smartlink² 10t features a titanium body (Ti6Al4V), contributing to its light weight of approximately 360 g and high durability. Its compact dimensions of 93 x 74 x 25 mm allow for discreet integration. The housing is made of acetal and rated IP67, ensuring resistance to immersion. The device is powered by a 0.925 Wh lithium polymer battery, providing up to 2,000 hours of operation at a 1 Hz refresh rate and up to 8,000 hours in low-power mode. Wireless inductive charging takes 1 hour for a full charge.

Connectivity and Data Analysis

The load cell wirelessly connects via Bluetooth to the Smartfittings mobile app (iOS and Android), enabling real-time load monitoring, data rate configuration (from 0.1 to 10 Hz), and sensor activation/deactivation. It can also connect directly to Vakaros Atlas 2 and Sailmon wireless displays without requiring a gateway. For deeper integration, the Smartlink² 10t can relay data via a Cyclops gateway to onboard electronics using NMEA2000, NMEA0183, NKE, UDP, and MQTT interfaces. The app and gateway provide post-race data logging features, including 1-, 10-, and 30-minute averages, GPS data, and local time.

Applications and Installation

The Smartlink² 10t is versatile and suitable for numerous applications on running rigging, such as cunningham, downhaul, jib sheet, mainsheet, backstays, checkstays, Code 0 stowage bags, halyards, and booms. It is designed for easy inline installation with flexible lines (ropes, webbing, textile shackles), with a recommended strop diameter of 12.4 mm for optimal accuracy. Its straightforward installation and compatibility with major electronic systems make it a tool for racers and cruisers aiming to optimize performance and rigging safety.

Documentation

Type	Nom
	marine_brochure2024_pdf.pdf
	Copy of App Guide Issue 9 EN.pdf
	Copy of smartlink2 guide Issue 3 EN.pdf
	Copy of App Guide Issue 9 FRA.pdf

Expert opinion

« The essential tool for rigging optimization and safety at sea »

The CYCLOPS Smartlink² 10t load cell is a strategic tool for demanding sailors, whether racers or high-performance cruisers. Its ability to provide real-time load data with ±1% accuracy up to 10 tonnes is essential for optimizing rig tuning. It allows precise quantification of the impact of each adjustment (cunningham, backstay, running backstay) on tension and sail shape, enabling rapid setting repetition and continuous performance improvement.

Beyond performance, load monitoring is a major safety asset. By preventing structural limits of the rig from being exceeded, the Smartlink² 10t helps avoid costly and dangerous damage. Its lightweight, compact titanium design minimizes bulk and rig impact. Installation in-line with textile shackles is straightforward, and versatile connectivity (smartphone app, dedicated displays such as Vakaros/Sailmon, or NMEA bridge) ensures broad compatibility with existing onboard electronics.

This sensor is particularly suited to racing or fast cruising sailboats where every performance gain and safety measure counts. Its robustness and autonomy make it a reliable choice for extended offshore use. It stands out for its ease of integration and the richness of its data visualization and analysis options, turning a simple measurement into a genuine performance lever for the sailor.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Smartlink 2 10t load cell

$3,168.00 USD

$3,168.00 USD ~~$3,334.00 USD~~

Frequently Asked Questions

Need help? Contact us

What is the maximum load capacity of the Smartlink² 10t sensor?

The Smartlink² 10t sensor is designed to measure loads up to 10,000 kg (10 tonnes). It provides an accuracy of ±1% of its maximum working load.

How to recharge the Smartlink² 10t sensor battery?

The Smartlink² 10t sensor is charged wirelessly via induction. Simply plug the supplied charger into a USB port or power outlet, then place the sensor on the charger with the wireless charging logo facing the charger. A full charge takes about 1 hour. The sensor must be powered on for the charging indication to be visible.

What is the battery autonomy of the Smartlink² 10t?

The Smartlink² 10t sensor is equipped with a 0.925 Wh lithium polymer battery. Its autonomy can reach up to 2,000 hours at a 1 Hz refresh rate, and up to 8,000 hours in low-power mode.

Which devices is the Smartlink² 10t sensor directly compatible with?

The Smartlink² 10t sensor can connect directly via Bluetooth to the Smartfittings mobile app (available on iOS and Android). It is also compatible for direct connection, without a bridge, with the Vakaros Atlas 2 and Sailmon wireless displays.

Can the Smartlink² 10t be integrated into existing onboard electronic systems?

Yes, for deeper integration, the Smartlink² 10t sensor can relay its data via an optional Cyclops gateway to onboard electronic systems using NMEA2000, NMEA0183, NKE, UDP, and MQTT interfaces.

What are the dimensions and weight of the Smartlink² 10t sensor?

The Smartlink² 10t sensor has compact dimensions of 93 x 74 x 25 mm and weighs approximately 360 grams. Its body is made of titanium (Ti6Al4V) and its housing is in acetal.

How to correctly install the Smartlink² 10t sensor for accurate measurements?

The Smartlink² 10t load cell must be installed inline with flexible lines (halyards, sheets, strops) for accurate load measurements. It is not designed for use in a bridle configuration. Using shackles or metal pins directly on the load cell is not recommended as it may damage the titanium body. For optimal accuracy of ±1% of the working load limit, use strops constructed with braided Dyneema loops with a finished diameter of 12.4 mm.

Is the Smartlink² 10t sensor waterproof?

Yes, the Smartlink² 10t sensor housing is rated IP67, ensuring immersion resistance and protection against dust.

What happens if the sensor's maximum working load is exceeded?

It is imperative not to exceed the maximum working load (MWL) of the Smartlink² 10t sensor. Exceeding the MWL, an impact load, or an overload greater than 150% of the MWL may cause permanent damage to the sensor's internal instrumentation and require recalibration. This would also void the warranty.

Can the Smartfittings app record load data?

Yes, the Smartfittings mobile application can record load data from the sensor. It provides recording functions for post-race analysis, including averages over 1, 10, and 30 minutes, as well as GPS data and local time. For recording sessions on iOS, the phone must remain unlocked, the application in the foreground, and the display set to never sleep to prevent data loss.