Collection: Cyclops Marine

Cyclops Marine: Measuring Rigging Loads in Real Time

Cyclops Marine designs sensors and connected solutions to monitor loads applied to rigging and onboard equipment. The range includes wireless load sensors, rig tuning, network interfaces, and accessories required for a consistent installation. The goal is to replace estimation with actionable measurement, whether for tuning a sailboat, monitoring a structural point, or documenting loads during navigation.

Smartlink and Smartlink²: Mobile Load Measurement

Smartlink sensors are installed within a load path to measure tension applied to a sheet, halyard, shroud, or anchor point. Multiple capacities and formats are available: the correct model depends on the maximum in-service load, mounting geometry, and desired safety margin. Available versions and accessories must therefore be compared using the technical datasheet for each reference.

Smarttoggle, Smarttune, and Smartbatten: Understanding Rigging

Smarttoggle targets installations where the sensor integrates directly with fittings or textile rigging. Smarttune monitors tension at the turnbuckle level and facilitates reproducible rig tuning. Smartbatten extends measurement to forces applied to battens. These families serve distinct uses: they are not interchangeable without verifying dimensions, mechanical interfaces, and measurement range.

Instrumented Axles and Custom Projects

Load pins and instrumented axles integrate into a defined mechanical assembly. Their diameter, length, usable span, and connectivity depend on the project. Relevant references are offered on a quote basis to validate sizing and integration conditions before ordering.

Interfaces, Cables, and Data Exploitation

A measurement is only useful if it reaches the right destination. Cyclops gateways and cables allow, depending on the reference, to connect sensors to onboard networks and displays: NMEA 2000, SeaTalkng, B&G, or dedicated links. Compatibility is never assumed based solely on the connector; the protocol, length, pinout, and target equipment must be checked.

The range also includes wireless chargers and Smart Rig Manager for data monitoring. Software subscription terms and exact accessory compatibility are confirmed reference by reference by Skysat.

Choosing the Right Cyclops Solution

• Usage: rig tuning, performance monitoring, spot load control, or mechanical point surveillance.
• Measurement range: typical load, maximum in-service load, and safety factor adapted to the assembly.
• Mechanical integration: axles, shackles, threads, diameters, available length, and load alignment.
• Data output: local reading, application, gateway, or display on the vessel’s electronic network.
• Environment: exposure, power supply, charging, and maintenance access required.

Which Boats Are These Solutions For?

Cyclops sensors can meet the needs of a cruising sailboat seeking to improve rig tuning, a racing crew comparing configurations, or a professional project requiring instrumentation of a mechanical point. The choice depends less on boat size than on actual loads, fittings, and how data must be accessed.

Frequently Asked Questions

What is the difference between Smartlink and Smarttoggle?
Smartlink is placed as part of the load path, while Smarttoggle follows a different integration geometry. The existing assembly and available dimensions determine the suitable family.

Can data be displayed on the vessel’s electronics?
Yes for certain configurations, using the appropriate gateway or cable. The network, protocol, and target display must be verified before ordering.

Why are some axles only available on a quote basis?
Because their dimensions and mechanical integration are project-specific. The quote process validates the configuration without forcing a standard reference that may be unsuitable.

How do I size a load sensor?
Based on the maximum in-service load, safety factor, geometry, and limits of the entire mechanical chain. Ultimate breaking load alone is insufficient.

Skysat Advice

Do not size a sensor based solely on its ultimate breaking load. Check the maximum in-service load, safety factor, mounting geometry, and compatibility of the entire mechanical chain. Our team can assist in selecting the sensor, interface, and accessories suited to your boat.