[CYCLOPS] Smartlink² 2t capteur d'effort — vue 1

[CYCLOPS] Smartlink² 2t capteur d'effort — vue 2

[CYCLOPS] Smartlink² 2t capteur d'effort — vue 3

[CYCLOPS] Smartlink² 2t capteur d'effort — vue 4

[CYCLOPS] Smartlink² 2t capteur d'effort — vue 5

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 5%

Cyclops Marine

SR11

Smartlink 2 2t load sensor

Le capteur d'effort sans fil CYCLOPS Smartlink² 2t est conçu pour mesurer les charges en temps réel sur les lignes souples, avec une capacité maximale de 2 000 kg et une précision de ±1%. Son corps en titane et son indice IP68 garantissent une robustesse marine.

Il transmet les données via Bluetooth à l'application Smartfittings ou aux afficheurs compatibles, et s'intègre aux systèmes NMEA via une passerelle Cyclops.

Livré à l'unité, sans accessoires.

Price excl. import taxesBenefit from the professional rate

$2,314.00 USD

$2,314.00 USD ~~$2,436.00 USD~~

Shipping calculated at checkout.

Prices exclude import taxes (rate varies by item and state). DAP delivery: import taxes are paid on delivery.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Operating voltage	3.7 V
Typical power consumption	0.0004625 W
Product width	55 mm
Product height	79 mm
Product depth	19 mm
IP rating	IP67
Bus compatibility	Bluetooth,NMEA 2000,NMEA 0183,NKE,UDP,MQTT
Mounting type	En ligne (sur lignes souples)
Linearity	±1%
Sensor output type	Numérique sans fil
Sensor connection type	Sans fil (Bluetooth)
Sensor type	Capteur d'effort sans fil
Sensor compatibility	Lignes souples (cordages, sangles, manilles textiles)
Data output	Charge en temps réel
Update rate	Réglable de 0,1 à 10 Hz (1 Hz par défaut)
Operating temperature range	-10 à +40 °C
Working Load Limit	2000 kg
Max Soft Attachment Diameter	9 mm (recommandé pour une précision optimale)
Measurement Accuracy	±1%
Wireless Protocol	Bluetooth
Battery life	2000 h (utilisation continue à 1 Hz), 8000 h (mode économie d'énergie)
Charging Time	1 heure
Weight	0.16
Product dimensions	79 x 55 x 19 mm
Material	Titane Ti6Al4V (corps), Acétal (boîtier)
Battery capacity	0.925
Battery type	Lithium Polymère
Calibration Frequency	Faible besoin de recalibration
Charging method	Induction sans fil
Compatible Os	iOS,Android
Country Of Manufacture	Royaume-Uni
Ease Of Installation	Facile
Primary function	Mesure d'effort,Sécurité du gréement,Optimisation des réglages
Product range	Smartlink
User Interface	Application mobile,Afficheurs de bord

Detailed description

Designed for performance sailing and safety at sea, the wireless load sensor CYCLOPS Smartlink² 2t provides accurate, real-time measurement of loads on flexible lines. With a maximum capacity of 2,000 kg (2 tonnes), this sensor is a tool for sail tuning and rig integrity monitoring.

Accuracy and robustness

The Smartlink² 2t stands out for its accuracy of ±1% of the maximum working load, maintained within a temperature range of -10°C to +40°C. Its body is made of Ti6Al4V titanium, a material known for its lightness and strength, particularly suited to models rated for 2 tonnes and above. The acetal housing provides waterproofing beyond IP68, ensuring protection against prolonged immersion in demanding marine environments. Its compact dimensions (79 x 55 x 19 mm) and 160 g weight minimize impact on rig dynamics and wind drag.

Connectivity and data management

This sensor integrates Bluetooth connectivity for wireless data transmission. It connects to the Cyclops Smartfittings app, available on iOS and Android, allowing real-time load monitoring, session recording, and adjustment of transmission frequency from 0.1 Hz to 10 Hz. The Smartlink² 2t can also sync directly with Vakaros and Sailmon displays. For full integration with onboard systems, it can be connected via a Cyclops gateway, offering NMEA2000, NMEA0183, NKE, UDP, and MQTT outputs. The internal 0.925Wh lithium polymer battery provides up to 2,000 hours of continuous use at 1 Hz, extendable to 8,000 hours in power-saving mode. Wireless inductive charging allows a full charge in 1 hour, with a full day’s operation after just 1 minute of charging.

Simplified installation and maintenance

The Smartlink² 2t is designed for easy inline installation on any flexible line (halyards, sheets, strops). It requires no major modifications to existing rigging. The Smartlink² design eliminates removable parts, enhancing robustness and reliability. Bluetooth range has been increased by approximately 60% compared to the previous version. For optimal accuracy, Cyclops Marine recommends using 9 mm diameter strops for calibration.

Documentation

Type	Nom
	marine_brochure2024_pdf.pdf
	Copy of App Guide Issue 9 EN.pdf
	Copy of smartlink2 guide Issue 3 EN.pdf
	Copy of App Guide Issue 9 FRA.pdf

Expert opinion

« Performance analysis and safety with the Smartlink² 2t load cell »

The CYCLOPS Smartlink² 2t load sensor is a strategic tool for demanding sailors, whether racers or cruisers concerned with safety. Its practical value lies in its ability to provide real-time load data, enabling fine-tuning of sail trim for maximum performance or anticipating critical rigging overload.

The Smartlink² 2t is designed for simple installation: it integrates inline on flexible lines such as halyards, sheets, or strops. It is critical to maintain the inline configuration, as a "patte d'oie" (bridle) setup would degrade measurement accuracy. For full integration into the boat’s electronics system, adding a Cyclops gateway is required, converting Bluetooth data into NMEA2000 or NMEA0183 signals, enabling centralized display on multifunction displays.

This model stands out for its Ti6Al4V titanium body, offering superior strength and lightness for its 2-ton capacity. The absence of removable parts, combined with an IP68+ waterproof rating, enhances its reliability in marine environments. The long battery life and wireless inductive charging are practical features that simplify daily use. It is essential not to exceed the working load limit and to use calibrated strops to ensure specified accuracy.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Smartlink 2 2t load sensor

$2,314.00 USD

$2,314.00 USD ~~$2,436.00 USD~~

Frequently Asked Questions

Need help? Contact us

What is the maximum load capacity of the Smartlink² 2t sensor?

The CYCLOPS Smartlink² 2t load cell is designed to measure loads on flexible lines with a maximum capacity of 2,000 kg (2 tonnes).

Which devices is the Smartlink² 2t sensor compatible with?

The Smartlink² 2t sensor connects via Bluetooth to the Cyclops Smartfittings app, available on iOS and Android. It can also sync directly with Vakaros and Sailmon displays.

For full integration with onboard systems, it can be connected via a Cyclops gateway, offering NMEA2000, NMEA0183, NKE, UDP, and MQTT outputs.

How is the Smartlink² 2t sensor powered and what is its battery life?

The sensor is equipped with an internal 0.925Wh Lithium Polymer battery. It offers 2,000 hours of continuous operation at 1 Hz.

In power-saving mode (0.25 Hz), its battery life can reach 8,000 hours.

How to recharge the Smartlink² 2t load cell?

The Smartlink² 2t sensor charges wirelessly via induction. A full charge takes approximately 1 hour.

To charge, plug the wireless charger into a USB port or power outlet (not supplied), then place the sensor on the charger with the wireless charging logo facing the charger. Ensure the sensor is powered on so the charging indicator is visible. The LED flashes red during charging and turns green when charge exceeds 90%.

What is the measurement accuracy of the Smartlink² 2t?

The Smartlink² 2t sensor provides an accuracy of ±1% of the Maximum Working Load (MWL). This accuracy is maintained within a temperature range from -10°C to +40°C.

What material is the Smartlink² 2t sensor body made of?

The Smartlink² 2t sensor body is made of Ti6Al4V titanium, a material known for its lightness and strength, particularly suited to models of 2 tonnes and above.

How to properly install the Smartlink² 2t sensor on a line?

The Smartlink² 2t is designed to be installed inline with flexible lines (ropes, strops) for the most accurate load measurement.

It is not recommended to use shackles or metal pins directly on the sensor as this could mark the titanium body and cause permanent damage. It must not be installed in a bridle configuration as this would make the displayed load inaccurate.

What are the dimensions and weight of the Smartlink² 2t sensor?

The Smartlink² 2t sensor has compact dimensions of 79 x 55 x 19 mm and weighs 160 grams.

What are the main features of the Smartfittings application for the Smartlink² 2t sensor?

The Smartfittings application, available on iOS and Android, offers several features:

Real-time load visualization.Session recording.Adjustment of sensor data transmission frequency (from 0.1 Hz to 10 Hz).Display of statistics (minimum, maximum, average) and averages over 1, 10, and 30 minutes."Load Talk" feature to hear loads through headphones (on iOS).