Fusion EL Sport gray 6.5" 80 W speakers (pair)

These Fusion marine loudspeakers have a nominal size of 6.5 inches. For installation, the required cut-out diameter is 130 mm (5 1/8 inches) and the total external diameter is 176 mm (6 15/16 inches).

These Fusion marine loudspeakers are sold in pairs.

These speakers are gray in color and belong to the Sport edition of Fusion’s EL series.

Yes, these speakers are specifically designed for marine use. The front of the speaker is protected against water infiltration.

The front of the loudspeaker is protected against water ingress. However, the rear of the loudspeaker, including all connected components and wires, is not waterproof and must be protected from moisture. Exposure to moisture at the rear of the loudspeaker may cause failure.

Before cutting the mounting surface, check that there is sufficient space behind the surface for the speaker. Use the provided mounting template to mark the cutout and mounting holes. Cut the surface along the marked lines and adjust if necessary with a file or sandpaper for a perfect fit.

Use 16 AWG (1.3 to 1.5 mm²) marine-grade tinned copper speaker wire for connecting speakers to your audio system.

Yes, it is important not to overtighten the screws, especially if the mounting surface is not perfectly flat. Also, do not apply grease or lubricant on the screws, as this could damage the speaker.

Once the speakers are mounted, hold the grille with the Fusion logo at the bottom (6 o'clock position). Turn the grille counterclockwise by about 30 degrees (to the 5 o'clock position). Place the grille on the speaker and turn it clockwise to lock it in place. Alternatively, you can align the Fusion logo at the 6 o'clock position and press to snap it into place.

Yes, it is essential to disconnect the boat's power supply before starting installation of this device to avoid serious injury or equipment damage.

These speakers are designed to be connected to marine audio systems. Ensure your source unit or amplifier is compatible with the power specifications and wiring requirements of these speakers. 16 AWG speaker wire is recommended for the connection.

Yes, exposure to water and damage to the rear of the speaker void the warranty. It is critical to protect this part of the speaker from moisture, even if mounted in an enclosure.

If you encounter difficulties during installation, it is recommended to consult the online product support. You can find resources and assistance on Garmin's support website.

Yes, it is strongly recommended to have your audio system installed by a professional installer. This ensures optimal performance and helps avoid potential personal injury or material damage.