Fusion NRX300 BE Marine Audio Remote

The Fusion NRX300 BE marine audio remote is an optional accessory designed for compatible Fusion stereo systems. It provides versatile control of your entertainment system and can also display navigation data via NMEA 2000 connectivity.

The NRX300 BE remote control has multiple buttons and a dial for various functions:

The power button turns the device on/off and mutes/unmutes audio. The source button switches between available sources. The menu button opens the menu, returns to the previous screen, or toggles between remote and NMEA 2000 modes. The play/pause, previous track, and next track buttons control audio playback and radio station selection. The rotary dial adjusts volume, navigates menus, and selects options.

To navigate the NRX300 BE remote control menus, use the rotary dial:

Turn the dial to highlight an item on screen. Press the dial to select the highlighted option.

Yes, you can adjust the brightness and contrast of the LCD screen on the NRX300 BE remote control. To do this, go to the SETTINGS menu, then select LCD. You can then adjust these settings and exit the menu.

To disable the power-saving function that automatically turns off the backlight after a period of inactivity, go to the SETTINGS menu, then select POWER SAVE. You can then enable or disable this function and exit the menu.

Yes, the NRX300 BE remote control can operate in NMEA 2000 repeater mode to display data supported by connected NMEA 2000 devices. To switch to NMEA 2000 repeater mode, hold down the source button. You can then select the NMEA 2000 data to display via the SETTINGS > NMEA MONITOR menu.

In NMEA 2000 repeater mode, you can select the measurement units for distance, speed, and depth. To do this, go to the SETTINGS > NMEA MONITOR > SET UNITS menu, choose the desired units, then exit the menu.

Yes, you can use the NRX300 BE remote to control music playback from a smartphone or a Bluetooth media player compatible with the stereo. You can pause, play, skip to the next or previous track. However, navigating through the music collection must be done on the media device itself.

The Fusion stereo system, which is Bluetooth-compatible, can be paired with up to eight multimedia devices. The NRX300 BE remote control allows you to control playback on the currently connected Bluetooth device.

Yes, the NRX300 BE remote control allows you to control music playback from a USB stick connected to the stereo. You can control playback, shuffle tracks, or repeat a track.

You can adjust the volume using the rotary knob. To switch between speaker zones (zones 1 and 2), press the knob. To control all zones simultaneously, press the knob until all zones are highlighted. You can also configure zones via SETTINGS > ZONE to adjust balance, volume limit, and subwoofer level (for zone 1).

Operating voltage: 10.8 to 16 Vdc (negative ground)Input current: 110 mA at 12 VdcNMEA 2000 load equivalence number (LEN): 3 (150 mA)Operating temperature: 0 to 50°C (32 to 122°F)Storage temperature: -20 to 70°C (-4 to 158°F)Ingress protection rating: IEC 60529 IPX7

The dimensions of the NRX300 BE remote control are as follows:

Front dimensions: 110 mm (4.33 in) wide by 70 mm (2.76 in) high. Top dimensions: 110 mm (4 5/16 in) long, 42 mm (1 5/8 in) wide, 28 mm (1 3/32 in) deep, and 16.5 mm (41/64 in) height of the surface.

Yes, the NRX300 BE remote control supports software updates. To ensure the device works properly with all compatible stereos on the network, it is recommended to update the software of all devices after installation. Updates can be performed via a connected compatible stereo or the Fusion-Link™ app.

To install the NRX300 BE remote control, a 50 mm (2 inch) circular cutout is required in the mounting surface. It is recommended to use the mounting template provided in the product box for precise cutting.

For installing the NRX300 BE remote control, the following tools are required:

Phillips screwdriverDrill2.5 mm (3/32 inch) drill bit50 mm (2 inch) hole sawMarine sealant (optional)

Yes, when choosing the mounting location, it is important to consider the following:

The device must be mounted in a location with at least 75 mm (3 in) of clearance behind the mounting surface for access to controls after installation. If the device is mounted outdoors, it must be well above the waterline and in a location where it will not be damaged by docks, pilings, or other equipment.

The NRX300 BE remote control housing contains the following items:

A mounting gasketFour #8 self-tapping screwsTwo screw capsA 6 m (20 ft) NMEA 2000 backbone cableA NMEA 2000 T-connectorA dust cover

The Fusion NRX300 BE remote control is an accessory for compatible Fusion stereos. It can be connected to a Fusion stereo in two ways:

Via a new Fusion remote control network: If the stereo can provide power (NRX POWER option in settings or included red cable). This network supports up to three remote controls.
Via an existing NMEA 2000 network: If the stereo cannot provide power to the remote control, or if you want to connect more than three remote controls, or if you want to control the stereo from a Fusion-Link™ compatible chartplotter. The NMEA 2000 network is powered by a power cable connected to the backbone.
The required cables and software settings vary depending on the stereo model.

Yes, this product is covered by a warranty. For detailed information on the terms and conditions of the warranty, please refer to the documentation provided with the product or Garmin’s support resources.