Fusion Signature Series 3 Sports 7.7" marine tower speakers, 280 W, CRGBW lighting

These Fusion Signature Series 3 marine tower speakers have a maximum power output of 280 watts.

These marine speakers have a 7.7-inch diameter.

The integrated CRGBW (cool white, red, green, blue, warm white) lighting allows you to customize the lighting ambiance on your boat. You can select from a wide range of static colors or create dynamic lighting effects.

True-Marine™ products undergo rigorous environmental testing in harsh marine conditions to exceed industry directives for marine products. They are designed for simple use and integrate advanced marine technologies to provide cutting-edge entertainment.

To clean your speakers, follow these steps:

Clean off all salt and salt residue with a damp cloth moistened with fresh water. Use a mild detergent to remove significant salt buildup or stains. Do not use harsh or solvent-based cleaners, as this could damage the product and void the warranty. Speakers are not designed to withstand high-pressure water jets.

Yes, these speakers are rated IP65 for protection against dust and water ingress under normal conditions. However, they are not designed to withstand high-pressure water jets, such as when washing your boat.

If no sound is coming from the speakers, check that all connections between the source device (stereo) and/or amplifier are properly plugged into the speaker terminals.

If the system lacks bass or treble, check that the correct polarity of the wires is respected between the source and the speakers. Wires must be connected from positive to positive and from negative to negative.

For installation, you will need the following tools and materials:

16 AWG (1.31 mm²) or 12 AWG (3.31 mm²) speaker cable (not included).20 AWG (0.5 mm²) cable for LEDs (not included).3 A inline fuse (for LEDs).Speaker mounting bracket (sold separately).Drill and 12 mm (1/2 in) bit.Wire strippers.Solder and dual-wall heat-shrink tubing for wire connections.

No, mounting brackets for Fusion Wake tower speakers are sold separately. Different bracket types are available for mounting on a wake tower or on a deck.

The speaker cable is not included. For most installations, a 16 AWG (1.31 mm²) cable is recommended. For longer distances or 2 Ohm loads, a 12 AWG (3.31 mm²) cable may be required.

For a 4 Ohm load (1 speaker): From 0 to 8.5 m (0 to 28 ft): 16 AWG. From 8.5 to 21 m (28 to 69 ft): 12 AWG. For a 2 Ohm load (2 speakers in parallel): From 0 to 4 m (0 to 14 ft): 16 AWG. From 4 to 10.5 m (14 to 35 ft): 12 AWG. If using aluminum or tinned wire, it is recommended to use a cable two gauges larger to compensate for potential voltage drop.

To control the LED lighting, it is recommended to install a FUSION CRGBW wireless remote control (sold separately). If you do not wish to install the remote control, you can set a static color by connecting the colored LED wires to the negative terminal (-) of a 12 V DC power source. The black LED wire must be connected to the positive terminal (+) of the same power source. A 3 A inline fuse is mandatory on the positive wire (+) near the power source, and an isolator switch or circuit breaker is recommended.

Speaker wire polarity is as follows:

White wire: Positive (+)
White wire with a black stripe: Negative (-)

You must use a 20 AWG (0.5 mm²) or thicker wire to connect the LEDs to the battery.

It is strongly recommended to have your audio system professionally installed to ensure optimal performance.

If the speakers were installed at an angle, you can rotate the speaker’s front grille and the stem so that the FUSION logo appears level. To do this, remove the six Phillips #2 screws that secure the speaker’s front grille to the housing, then reattach the front grille. Next, manually rotate the stem at the rear of the housing until the FUSION logo is level.

Yes, these speakers are compatible with a FUSION CRGBW wireless remote, which is recommended to turn the LEDs on and off, change colors, and create lighting effects. The remote is sold separately.

The LED lighting requires a 12 V DC power source. A 3 A inline fuse is mandatory on the positive (+) wire near the power source.

These True-Marine Fusion speakers carry a 3-year limited global consumer warranty.

The limited warranty does not cover:

Cosmetic damage (scratches, scuffs, dents).Consumables (unless damage is due to a material or manufacturing defect).Damage caused by an accident, misuse, abuse, water, flood, fire, or other natural disasters or external causes.Damage caused by service performed by a service provider not authorized by Garmin.Damage to a product modified or altered without Garmin’s written authorization.Damage to a product connected to power and/or data cables not supplied by Garmin, or to non-UL-certified AC adapters and cables not labeled as limited power source (LPS).