Fusion Signature Series 3 8.8" marine tower speakers, 330 W white CRGBW

These Fusion Signature Series 3 marine tower speakers have a maximum power output of 330 W.

These speakers have an 8.8-inch (approximately 22.35 cm) diameter.

Yes, these speakers are rated IP65 for protection against dust and water ingress under normal conditions. However, they are not designed to withstand high-pressure water jets, which can occur when washing your boat. Improper cleaning could damage the product and void the warranty.

The CRGBW lighting means the speakers are equipped with LEDs that can produce cool white, red, green, blue, and warm white, offering a wide range of lighting options.

Yes, these speakers are True-Marine™ products. This means they have undergone rigorous environmental testing in harsh marine conditions to exceed industry guidelines, ensuring robust design and top-tier entertainment experience. All True-Marine products are covered by FUSION’s 3-year limited warranty.

To clean your speakers, remove any salt residue with a damp cloth soaked in fresh water. For heavy salt buildup or stains, use a mild detergent. Never use harsh cleaners or solvent-based products, as they may damage the unit and void the warranty.

No, speaker wiring is not included with the product. You will need to purchase the recommended speaker wire separately.

For most installations, a 16 AWG (1.31 mm²) speaker wire is recommended for distances up to 8.5 meters (28 feet) with a 4-ohm load (a single speaker). For longer distances (up to 21 meters or 69 feet), a 12 AWG (3.31 mm²) wire is required. If using aluminum or tinned wire, it is advisable to use a wire gauge two sizes larger to compensate for potential voltage drop.

Yes, mounting brackets for FUSION marine tower speakers must be purchased separately. Different bracket types are available for mounting on a wakeboard tower or on the deck.

The tools and materials required include:

16 AWG (1.31 mm²) or 12 AWG (3.31 mm²) wire for speakers. 20 AWG (0.5 mm²) wire for LEDs. A 3 A inline fuse for LEDs. Speaker mounting bracket (sold separately). A drill with a 12 mm (1/2 in) bit. Wire strippers. Solder and dual-wall heat-shrink tubing for wire connections. Additional tools and materials may be required for custom installations.

If you do not install the remote control, you can set the LED static color by connecting the black wire of the LED cable to the positive terminal (+) of a 12 V DC power source via a 3 A fuse. Then, connect one or more of the LED color wires (red, green, blue, turquoise for cool white, yellow for warm white) to the negative terminal (-) of the same power source. Unused LED wires must be insulated to prevent short circuits.

Yes, it is recommended to install a FUSION CRGBW wireless remote (sold separately) to turn the LEDs on and off, change colors, and create lighting effects. Without the remote, you can set a static color by directly connecting the colored LED wires to the power source.

If the speakers were installed at an angle, you can rotate the speaker’s front baffle and rear housing by hand so the FUSION logos appear level. To do this, remove the six Phillips n°2 screws from the front of the speaker, adjust the front baffle, then the rear housing.

For speaker wiring, the white wire is for the positive polarity (+) and the white wire with a black stripe is for the negative polarity (-).

The provided information does not specify compatibility with all marine amplifiers. It is important to verify that your amplifier is compatible with a 4 ohm or 2 ohm load (if two speakers are connected in parallel) and that it can deliver adequate power for 330 W speakers.

Yes, you can connect multiple speakers in parallel. If you connect two speakers in parallel, the load will be 2 ohms. In this case, the recommended wire gauge is 16 AWG for distances up to 4 meters (14 feet) and 12 AWG for distances up to 10.5 meters (35 feet).

These speakers, being True-Marine™ products from Fusion, are covered by a limited 3-year consumer warranty worldwide.

The limited warranty does not cover:

Cosmetic damage, such as scratches, scuffs, and dents.Consumables, such as batteries, unless the damage is due to a material or manufacturing defect.Damage caused by an accident, misuse, improper use, water, flooding, fire, or other natural disasters.Damage caused by service performed by a person not authorized by Garmin.Damage to a product that has been modified or altered without Garmin’s written authorization.Damage to a product that has been connected to power and/or data cables not supplied by Garmin or to non-UL-certified power adapters.

No, these speakers are rated IP65 for protection against dust and water in normal conditions, but they are not designed to withstand high-pressure water jets. Damage caused by high-pressure cleaning may void the warranty.

Yes, the product contains magnets. It is important to consult your doctor and the manufacturer of your medical device if you use medical devices, as magnets may interfere with them. Additionally, be cautious when using the product near other electronic devices, as magnets may also damage them.