FUSION SM Shallow Mount 6.5" white 100 W marine speakers

These Fusion marine speakers have a peak (maximum) power output of 100 Watts.

These speakers are 6.5-inch (16.5 cm) models.

These speakers are rated IEC 60529 IP65. This means they are fully protected against dust and water jets, making them suitable for a marine environment under normal conditions.

The cone of these speakers is made of polypropylene and the surround of rubber, materials chosen for their durability and performance in a marine environment.

The frequency response range of these speakers is 150 Hz to 20 kHz, providing clear and balanced sound reproduction.

The nominal impedance of these speakers is 4 Ohms.

These speakers are designed to operate within a temperature range of 0 to 50°C (32 to 122°F).

The efficiency of these speakers is 84 dB (measured at 1 W/1 m).

The minimum mounting depth (clearance) required for these speakers is 24 mm (15/16 in).

The required cutout diameter (clearance) for installing these speakers is 130 mm (5 1/8 in).

These speakers are supplied with a fabric grille, which is recommended for indoor installations only. If you plan an outdoor installation, you should purchase a separate plastic grille.

For installation, you will need the following tools:

Electric drill and appropriate bitUtility knife for cutting surface materialPhillips-head screwdriverMarine-grade 16 AWG (1.3 to 1.5 mm²) tinned copper speaker wireCrimping pliersInsulating tapeMarine sealant (optional)

Yes, it is strongly recommended to use the mounting template included in the product box. It is not advisable to print your own template, as incorrect printing could result in a cut that is too large or too small and damage the mounting surface.

No, it is important not to apply grease or lubricant on the screws when mounting the speakers to the mounting surface. Grease or other lubricants can damage the speaker.

To clean your speakers:

Clean off any salt residue with a damp cloth soaked in fresh water.Use a mild detergent to remove significant salt buildup or stains.Note: Do not use harsh or solvent-based cleaners, as they may damage the product and void the warranty. Also avoid high-pressure water jets, as they are not designed to withstand such pressure and could damage the product.

Yes, it is strongly recommended to have your audio system professionally installed to ensure optimal performance and correct installation.

These speakers are designed to be connected directly to a Fusion stereo system. Connecting these speakers to an external amplifier may damage the audio system.