Garmin Reactor™ autopilot remote control

The Garmin Reactor™ remote control is designed to provide remote operation of your Garmin Reactor™ autopilot system. It allows helmsmen to maintain control of heading and autopilot functions from any location on the boat.

The Reactor™ remote control allows you to control the autopilot up to a range of 14 meters from the main control head of your system.

The remote features a 30.2 mm transflective MIP (memory-in-pixel) display with a 240 x 240 pixel resolution. This screen ensures optimal readability even in full sunlight.

The remote control is made of glass-filled nylon. Its ergonomic and robust design ensures durability compliant with marine requirements.

The remote control has an IPX7 waterproof rating. This means it can withstand accidental immersion up to 1 meter deep for 30 minutes.

The remote control dimensions are 152 mm (width) x 52 mm (height) x 32 mm (depth). Its weight is 109 g without batteries.

The remote control requires two AA batteries. These batteries are not included with the product. For best performance, it is recommended to use lithium batteries.

With typical use, the remote control provides a battery life of approximately 240 hours with two AA batteries.

To install the batteries:

Turn the D-ring counterclockwise and pull to remove the cover.Insert two AA batteries, observing the correct polarity.Replace the battery cover and turn the D-ring clockwise.

The remote control is designed to be used with Garmin Reactor™ autopilot systems. It must be paired with a control head, such as a GHC™ 20, GHC 50, or a chartplotter compatible and connected to the same NMEA 2000® network as the autopilot system.

To pair the remote control with a control head:

On the control head, select Menu > Configuration > Remote Control > Search for remote control. 'Enabled' appears on the screen.Use the remote control to select the appropriate option:If you have a GHC 20, select the Menu key > Pair with GHC 20.If you have a GHC 50, select the Menu key > Pair with GHC 50.The control head emits a beep and displays a confirmation message.Select Connect.

To pair the wireless remote with the chartplotter:

On the chartplotter, select Settings > Communications > Wireless Devices > Wireless Remotes > Autopilot Remote. If needed, select Enable.Select New Connection.On the remote, select the Menu key > Pair with MFD. The chartplotter will beep and display a confirmation message.On the chartplotter, select Yes to complete the pairing process.

Yes, the remote control has gesture control functions. You can engage or adjust the heading by simply pointing the remote in the desired direction after calibrating the built-in compass.

To calibrate the remote control compass:

Select the Menu button > Compass calibration. Follow the on-screen instructions. It is recommended to calibrate the compass outdoors, away from objects that influence magnetic fields such as vehicles or buildings.

Yes, the action buttons (1 to 3) on the remote control are pre-programmed with default or custom actions, but you can reassign their functions via the connected control head or chartplotter.

Once the autopilot is engaged:

To adjust the heading by one degree to port or starboard, press the left arrow or right arrow key.To adjust the heading in predefined tacking increments (default 10 degrees), press the double left arrow or double right arrow key. Hold for cumulative adjustments.To steer the rudder to port or starboard, hold the left arrow or right arrow key and release.

Yes, sailing-specific functions and models are available for programmable buttons when the remote is connected to an autopilot on a sailboat. This includes activating a wind-hold function (Wind Hold) and the ability to tack or jibe.

Pour installer le berceau :

Utilisez le berceau comme gabarit pour marquer les emplacements des trous de perçage sur la surface de montage.Mettez le berceau de côté (ne percez pas à travers le berceau).À l'aide d'un foret de 3 mm (1/8 po), percez les avant-trous.À l'aide des vis incluses, fixez le berceau à la surface de montage.

By pressing the Menu button, you can access the following settings:

Backlight: Adjusts the screen backlight level.Beeper: Sets whether and when audible sounds are used.Compass calibration: Calibrates the compass for the gesture control function.Units: Sets the measurement units.Restore default settings: Restores the remote control to factory settings.About: Displays information about the remote control.

Yes, the standard limited Garmin warranty applies to this accessory.