Spot LED Mantagua Tudy 20W en inox poli, design rond encastrable, lumière blanc chaud. IP67.

Spot LED encastrable Mantagua Tudy 20W en inox poli, rond, IP67, blanc chaud 3000K, Ø 72mm.

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

MANTAGUA

01439

Spot LED Tudy polished stainless steel 20W

The Mantagua Tudy Inox Polished 20W LED spot is a flush-mount luminaire drawing 2.4W and delivering 250 lumens in warm white (3000K), ideal for marine environments. Powered by 9-30VDC and certified IP67/IK06, it ensures perfect waterproofing and shock resistance without interfering with AIS/VHF systems (IEC60945). This switchless version from the Tudy range comes with 10 cm of electrical wire and two mounting springs for easy installation.

Retail priceBenefit from the professional rate

$42.78 USD

$42.78 USD ~~$47.85 USD~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Type de produit	Spot LED
Installation type	Flush-mounted
Operating voltage range	9-30
Typical power consumption	2.4
Flux lumineux	250.0
Angle du faisceau	120.0
Température de couleur	3000.0
Light color	White
Diamètre extérieur	72.0
Housing material	Stainless steel and ABS
Couleur / finition	Polished stainless steel
IP rating	IP67
Matériau principal du corps	Stainless steel and ABS
Longueur du câble (cm)	10
Diamètre de découpe d'installation	54.0
Conformité IEC 60945	Yes
Indice de protection contre les chocs	IK06
Marque de la technologie LED	CREE
Nom du modèle	Tudy
Accessoire de montage inclus	Insulating gasket
Mounting hardware included	2 springs
Profondeur du produit	20
Poids du produit (g)	54
Warranty	2

Detailed description

The Mantagua Spot LED Tudy Polished Stainless Steel 20W is a recessed luminaire designed for demanding marine environments. It delivers a warm white light of 250 lumens with a power consumption of only 2.4 W, equivalent to a 20 W halogen lamp. Its polished stainless steel and ABS construction, combined with an IP67 waterproof rating and IK06 impact resistance, ensures high durability in humid or outdoor conditions.

Performance and Marine Compatibility

Operating on a versatile 9 to 30 VDC power supply, this LED spot integrates SAMSUNG® chips for enhanced reliability. Its 120° beam angle provides wide and uniform light diffusion (3000 K), suitable for cabins, bathrooms, or decks. IEC60945 certification confirms no interference with onboard VHF and AIS systems, a critical safety criterion for nautical applications. Compared to the 1.9 W (140 lm) Tudy version, this 2.4 W model offers higher light output, positioning it as a primary lighting solution for spaces requiring greater clarity.

Integration and Robustness

With compact dimensions (Ø 72 mm x 20 mm) and a weight of 54 g, the Tudy Polished Stainless Steel 20W spot is easily installed via recessing using the two supplied mounting springs. It is pre-wired with 10 cm of electrical cable to simplify connection. The Mantagua Tudy range also offers variants with switches, brushed or white finishes, and lower power ratings, but this model stands out for its balance between light output and aesthetic discretion. It is potentially compatible with the Mantagua dimmer (ref. 01159) for light intensity control, although compatibility is explicitly mentioned for the 1.9 W versions of the Tudy range. Its design even allows installation on an aluminum base via an optional insulating gasket, demonstrating its versatility.

Documentation

Type	Nom
	Page_Tudy-12.pdf

Expert opinion

Pol CONIN

Digital Manager

« Spot LED Tudy 20W: marine-certified performance and reliability »

The Mantagua Tudy Inox Polished 20W LED spot is a robust and reliable lighting solution for interior and exterior marine applications. Its design with an ABS body and polished stainless steel front provides excellent resistance to corrosion and water spray, validated by its IP67 rating. This level of waterproofing makes it perfectly suited for wet areas such as bathrooms, showers, or open cockpits. The integration of SAMSUNG® LED chips ensures an extended lifespan and consistent light output, delivering 250 lumens with low power consumption of 2.4 W at a voltage range of 9 to 30 VDC.

A major advantage of this spot is its IEC60945 certification, guaranteeing it emits no electromagnetic interference that could disrupt sensitive navigation equipment such as AIS or VHF. This is a critical point for safety and compliance in onboard installations. The flush-mount design, facilitated by the two included springs and the 10 cm pre-connected cable, simplifies integration into various surfaces. While the Tudy range offers versions with a switch or different finishes, this model without a switch allows for a more discreet integration into a centralized lighting circuit, potentially controlled by a compatible Mantagua dimmer (ref. 01159), although this compatibility is explicitly mentioned only for the 1.9W versions in the Tudy range. Its robustness (IK06) and versatility make it a strategic choice for durable and high-performance lighting.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Spot LED Tudy polished stainless steel 20W

$42.78 USD

$42.78 USD ~~$47.85 USD~~

Frequently Asked Questions

Need help? Contact us

What is the power consumption of this LED spot?

This Tudy LED spot has a power consumption of 2.4 Watts.

What is the luminous output (in lumens) of this spot?

The Tudy Inox Polished 20W LED spot delivers a luminous output of 250 lumens.

What is the lighting color of this LED spot?

This LED spot produces a warm white light (3000 K).

What materials is the Tudy LED spot made of?

The spot is made of polished stainless steel and ABS, ensuring robustness in a marine environment.

What is the waterproof rating of this LED spot?

This LED spot has an IP67 waterproof rating, making it fully waterproof and suitable for wet or outdoor environments.

What is its impact resistance?

The Tudy Inox Poli 20W LED spot has an impact resistance rating of IK06.

What is the beam angle of this spot?

This LED spot provides a 120° beam angle, ensuring wide and uniform light diffusion.

What are the dimensions and weight of the Tudy LED spot?

The spot has an outer diameter of 72 mm and a depth of 20 mm. Its weight is 54 grams.

Does this LED spot model have an integrated switch?

No, model 01439 (Spot LED Tudy Inox Poli 20W) is supplied without an integrated switch.

What type of LED chips are used in this spotlight?

This LED spotlight uses SAMSUNG® chips for enhanced reliability.

In which environments can this LED spot be used?

This spot is designed for marine environments. It is ideal for indoor lighting (cabins, bathrooms) or outdoor use, thanks to its IP67 waterproof rating.

Why is the spot named '20W' when it consumes 2.4W?

The '20W' designation refers to the equivalent lighting power of a traditional halogen bulb, while its actual LED consumption is only 2.4W.

How is the Tudy LED spot installed?

The spot is installed by recessing it into the surface. It comes with two mounting springs to simplify installation.

What drill bit diameter is required for flush mounting?

A 54 mm drill bit diameter is required for flush mounting the spot.

Is the spotlight supplied with wiring?

Yes, the spotlight is pre-wired and supplied with 10 cm of electrical wire to simplify connection.

Is it possible to mount this spot on an aluminum base?

Yes, it is possible to mount this spot on an aluminum base. This requires the use of an insulating gasket (not included by default with this SKU) to allow stainless steel to be mounted on aluminum.

What is the input voltage range for this LED spot?

This LED spot operates on a versatile 9 to 30 Volts DC (VDC) power supply.

Can this LED spot interfere with marine electronic equipment such as VHF or AIS?

No, this spot is IEC60945 certified, confirming no interference with VHF, AIS, or other onboard communication and navigation systems.

Is the Tudy Inox Polished 20W LED spot compatible with a dimmer (intensity variator)?

Compatibility with the Mantagua dimmer (ref. 01159) is explicitly stated for the 1.9W versions of the Tudy range (ref. 01437, 01489 and 01521). For this 2.4W model (ref. 01439), compatibility with a dimmer is not specifically indicated.