Simrad NSS 4-10 multifunction display with worldwide base mapping

The Simrad NSS 4-10 MFD is equipped with a 10-inch high-definition SolarMAX™ display. This screen is designed to provide excellent visibility even in full sunlight.

The NSS 4-10 MFD screen has a resolution of 1280 x 800 pixels. Its brightness exceeds 1200 nits, with viewing angles of 80° in all directions, ensuring optimal clarity.

The Simrad NSS 4-10 MFD features a Qualcomm® 8-core processor. This processor delivers immediate responsiveness and smooth navigation for all device functions.

Yes, the NSS 4-10 MFD integrates a 10 Hz GPS receiver. This ensures accurate positioning and rapid updates of your position on the chartplotter.

This MFD is equipped with an integrated 1 kW CHIRP dual-channel fishfinder. It is designed to provide detailed and precise underwater imagery for navigation and fishing.

Yes, the NSS 4-10 MFD is compatible with several advanced sonar technologies. It supports Active Imaging™ and Active Imaging™ HD technologies, as well as the StructureScan™ 3D and ActiveTarget™ modules for real-time visualization of fish and underwater structures. It can also track up to four sonar sources simultaneously.

The Simrad NSS 4-10 MFD comes with a worldwide base map (WORLD BASEMAP). For more detailed charts, a C-MAP DISCOVER X or REVEAL X charting card is required.

The maximum power consumption of the Simrad NSS 4-10 MFD (10-inch model) is 28 W.

The NSS 4-10 MFD can operate within a temperature range from -15°C to 55°C (5°F to 131°F). For storage, the range is -20°C to 60°C (-4°F to 140°F).

The weight of the Simrad NSS 4-10 MFD, for the display alone, is 1.8 kg (3.97 lb).

Yes, the NSS 4-10 MFD unit (10-inch model) has a customizable button.

The NSS 4-10 MFD requires a power supply voltage of 12/24 V DC, with a minimum and maximum range of 10 V DC to 31.2 V DC.

When selecting the mounting location, consider:

Available space for cable routing, connections, and support.The free space around the unit to prevent overheating.The structure and strength of the mounting surface, as well as potential vibrations.A minimum distance of 1 meter (3 feet) between the device, its cables, and any equipment or cables transmitting radio signals.A minimum distance of 2 meters (7 feet) between the device, its cables, and the HF radio (SSB).

Yes, sharp bends in cables should be avoided. Drip loops and service loops should also be created to facilitate maintenance and protect connections.

The yellow control power wire can be configured either as an input (to power the unit when power is applied) or as an output (to power other devices when the unit is switched on). This configuration is done via the device settings: Settings > Boat network > Devices > This device > MFD > Display details > Power control.

The blue wire of the power cable has two configurable functions:

Sonar ping synchronization: It can be connected to devices compatible with sonar or imaging transducers to reduce interference. Configuration is done via Settings > Boat Network > Devices > This Device > MFD > Display Details > Sonar ping synchronization.External alarm output: If sonar ping synchronization is disabled, this wire can be connected to an external buzzer or siren to trigger an alarm.

If the voltage at the connection point is below 9.5 V DC, it is recommended to move the power insertion point to ensure stable operation of the device.

For detailed charts, the Simrad NSS 4-10 MFD requires a next-generation C-MAP DISCOVER X or REVEAL X charting card.

Yes, the Simrad NSS 4-10 MFD is fully compatible with NMEA 2000® networks. It supports the reception and transmission of a wide range of NMEA 2000® PGN (Parameter Group Number) messages for integration with other marine equipment.

Yes, the NSS 4-10 MFD USB port can be used to connect an external storage device, such as a USB flash drive, to transfer data or updates.