Raymarine Câble d'adaptation (8 vers 25) sonde CP370 sur Axiom RV

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 14%

Raymarine

A80489

Adapter cable (8 to 25) for CP370 probe on Axiom RV

Official Raymarine A80489 adapter cable to connect an 8-pin transducer, compatible with the CP370 sonar module, to an Axiom RV series multifunction display equipped with a 25-pin port. This is the essential solution to modernize your electronics while keeping your existing transducer.

Includes: Adapter cable only.

Retail priceBenefit from the professional rate

66,89€

66,89€ ~~78,00€~~

Tax included. Shipping calculated at checkout.

In stock

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	Raymarine 8-pin to 25-pin
Cable type	Transducer adapter cable
Cable length	0.5
Compatible network	Raymarine Sonar (Proprietary)
Operating temperature	-25 to +55
Storage temperature	-30 to +70
Adapter direction	8-pin transducer (CP370) to 25-pin MFD (Axiom RV)
Cable application	CP370 transducer to Axiom RV screen adapter
Certifications	CE
Color	Black
Number of conductors	8.0
Conductor material	Tinned Copper
Connector A type	Raymarine 8-pin (Transducer)
Connector B type	Raymarine 25-pin (Axiom RV)
Connector locking mechanism	Threaded ring
Current type	DC
Flexibility	Flexible
Installation location	Behind console / dashboard
Jacket material	PVC
Max voltage	30.0
Min bend radius	50
Typical power consumption	N/A
Pre-molded connectors	Yes, 1x 8-pin, 1x 25-pin
Section (AWG)	24.0
Section (mm²)	0.2
Shielding	Shielded
Shielding type	Braid and foil
Adapted signal type	Traditional / CHIRP Sonar (50/200 kHz)
Supported sonar frequencies	50 kHz, 200 kHz
UV resistance	Yes
IP rating	IPX6
Weight	0.18
Conductor finish	Tinned
Wiring standard	Raymarine proprietary

Detailed description

The Raymarine A80489 adapter cable is the essential solution for boat owners looking to upgrade their navigation electronics. It allows you to connect an existing transducer, originally designed for a Raymarine CP370 sounder module, directly to an Axiom RV series multifunction display. This adapter ensures a seamless transition between hardware generations, protecting your initial investment in a quality transducer.

Compatibility and Connection

This cable specifically converts the 8-pin connector of CP370-compatible transducers to the 25-pin connector required by the "RealVision 3D + 1kW" ports on Axiom RV MFDs. By using this adapter, you retain the capabilities of your traditional transducer while benefiting from the interface and advanced features of your new Axiom RV display. It is a plug-and-play solution that greatly simplifies installation and avoids the need to replace an existing transducer, an often complex and costly operation.

Positioning within the Raymarine Range

Unlike Y-splitters or extension cables, the A80489 has a very specific conversion function. It differs from other cables such as the A80488 (which adapts a CP370 transducer to an Axiom DV) by its 25-pin connector, dedicated exclusively to Axiom RV models. It is an essential component for ensuring backward compatibility within the Raymarine ecosystem, allowing for a progressive upgrade of your navigation and fishfinding system.

Expert opinion

Payment and security

Your payment information and data are processed securely.

Adapter cable (8 to 25) for CP370 probe on Axiom RV

66,89€

66,89€ ~~78,00€~~

Frequently Asked Questions

Need help? Contact us

What exactly is this A80489 adapter cable for?

This A80489 adapter cable is used to connect an existing marine transducer, equipped with an 8-pin connector (originally designed for a Raymarine CP370 sounder module), to a Raymarine Axiom RV series multifunction display, which has a 25-pin transducer port.

I have a transducer that was connected to a CP370 module, can I connect it to my new Axiom RV with this cable?

Yes, this is precisely the function of this adapter. It was designed to allow users to keep their CP370 compatible transducer (8-pin connector) when upgrading to an Axiom RV display (25-pin port), thus avoiding the need to replace the transducer.

By using this adapter, will I have RealVision 3D functions with my old transducer?

No. This adapter allows your traditional transducer to display classic 2D sonar data on your Axiom RV display. It cannot add features that the transducer does not possess. To benefit from DownVision, SideVision, or RealVision 3D technologies, you must use a transducer specifically designed for them.

Is the installation of this cable complicated?

No, the installation is very simple and 'plug-and-play'. Simply connect the cable from your transducer (8-pin connector) to the corresponding end of the adapter, then screw the other end (25-pin connector) to the 'RealVision 3D' port on the back of your Axiom RV display.

Do I need to perform any specific configuration on my Axiom RV after connecting the cable?

Generally, the Axiom RV display automatically detects the type of transducer connected. However, it is recommended to check in the sonar settings that the correct transducer model is selected from the list to ensure optimal performance.

Will water temperature information be transmitted?

Yes, if your original transducer (CP370 compatible) is equipped with a temperature sensor, this adapter will transmit the temperature data to your Axiom RV display without any issues.

Can I use this cable to connect a transducer from a brand other than Raymarine?

This adapter is specifically designed for the Raymarine ecosystem. It is intended for connecting Raymarine transducers (or Airmar transducers compatible with Raymarine) with an 8-pin connector to Raymarine Axiom RV displays. Use with other brands is not guaranteed and could damage your equipment.

Is the connection waterproof and secure?

Yes, both connectors feature a screw-on locking ring that ensures a strong and waterproof connection, designed to withstand the marine environment and vibrations.

What is the advantage of using this cable instead of changing the transducer?

The main advantage is economic and practical. It allows you to keep your existing transducer, which is often expensive and complex to install (especially thru-hull models), while still enjoying the performance and interface of a latest-generation multifunction display.

Will this adapter work with a CHIRP transducer?

This adapter will work with traditional transducers (non-CHIRP or single-function CHIRP) that were compatible with the CP370 module. It will transmit the transducer's signal to the Axiom RV, which can interpret it.

How do I identify the transducer port on my Axiom RV?

On the back of your Axiom RV display, the transducer port is clearly identified. It is the largest round connector, with 25 pins, often labeled 'TRANSDUCER' or 'RealVision 3D'.

Is this cable necessary if I buy a new RealVision 3D transducer with my Axiom RV?

No. If you purchase a new Raymarine RealVision 3D transducer, it will come with the appropriate 25-pin connector to plug directly into your Axiom RV. This A80489 adapter cable is only useful if you wish to reuse an older 8-pin transducer.