Alalisvoolu digitaalne ampermeeter - 500 kuni 500 A

The Blue Sea 8236-BSS DC digital ammeter is designed specifically for precise monitoring of direct current in marine electrical systems. It provides a clear and reliable display of current intensity, making it ideal for applications where direct ampere reading is a priority.

This ammeter is calibrated to work with a 500A-50mV shunt and allows current measurement within a ±500 A DC range.

The overall accuracy of the Blue Sea 8236-BSS ammeter is ±0.5 % of reading, with a tolerance of one digit of the least significant resolution.

The device's resolution varies depending on the current range:

For readings between -99.9 A and +500 A DC, the resolution is 0.1 A DC. For currents between -100 A and -500 A DC, the resolution is 1 A DC.

The Blue Sea 8236-BSS DC digital ammeter displays data on a screen with a character size of 9/16" (approximately 14 mm).

The maximum electrical consumption of the Blue Sea 8236-BSS DC digital ammeter is 1.00 W.

The front panel of the ammeter is splash-proof. However, the device is not designed for outdoor installation without additional protection or in very humid environments.

Yes, the printed circuits of the Blue Sea 8236-BSS DC digital ammeter are coated for increased corrosion resistance, which is essential for marine environments.

This ammeter is calibrated to operate specifically with a 500A-50mV shunt. It is important to note that this shunt is not included with the device and must be purchased separately.

The Blue Sea 8236-BSS ammeter operates on a direct current (DC) input voltage range of 8 to 50V.

Yes, since the ammeter is powered by a DC voltage range of 8 to 50V, it is compatible with common marine electrical systems of 12V and 24V, as well as other voltages within this range.

The ammeter should be installed in a visible position with easy access to the buttons. For better visibility, avoid placing the device in direct sunlight. The chosen location must also be dry and protected.

Although the front panel is splash-proof and the circuits are coated for corrosion resistance, the ammeter is not intended for use in highly humid environments or to be installed outdoors without additional protection.

The physical dimensions of the ammeter are as follows:

Height: 2.431" (61.75 mm)Width: 2.896" (73.56 mm)Depth: 3.400" (86.36 mm)

Yes, installing this ammeter requires the ability to make high-current connections and direct connections to the battery’s positive terminal. Basic electrical skills are recommended. If you lack these, hire a qualified electrician.

Wiring must be routed in safe, dry cable trays, with an appropriate strain relief. High-current connections and those directly to the battery’s positive terminal must be handled carefully and crimped as shown in the wiring diagram (not provided here).

During installation, it is imperative to wear safety goggles, disconnect all charging sources, and avoid creating sparks that could ignite battery gases. High-current connections must be handled with extreme care and properly fused.