e-Series On-Off Battery Switch - e-Series On-Off Battery Switch

e-Series On-Off Battery Switch - Mounting Diagram

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 10%

Blue Sea Systems

9004E-BSS

Lüliti-patarei BLUE SEA e-Series sisselülitus/väljalülitus 9004E

Le coupe-batterie BLUE SEA e-Series ON/OFF 9004E est une solution fiable pour isoler une batterie unique vers un groupe de charges, adapté aux moteurs in-bord essence et diesel. Issu de la gamme e-Series, il offre une capacité continue de 350 A, une tension max de 48 V DC, et intègre la protection contre l'allumage ainsi qu'une fonction AFD. Le produit inclut le coupe-batterie 9004E.

Public priceGet pro pricing

79,03€

79,03€ ~~88,50€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Laosolekus

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Toote kasutuse eesmärk	Gestion et déconnexion d'une seule batterie pour moteurs in-bord essence et diesel
Lüliti tüüp	Monocircuit ON-OFF
Pidevvoolutugevus (A)	350
Puhkevool (A)	600
Startvool (A)	1200
Maksimaalne alalisvoolu pinge	48
Pooluste arv	1
Asendid	2
AFD-kaitse	Oui
Liitmise tüüp	Goujons en cuivre étamé
Liitmise suurus	3/8"-16 (M10)
Juhtmeühenduse tüüp	Cosses à œillet pour câble 4/0 AWG
Juhtimise tüüp	Manuel rotatif
Montaažitüüp	Montage en surface ou sur panneau arrière/avant
IP-tunnus	IP66
Tööpinge vahemik	0-48
Paneeli lõike läbimõõt (mm)	40.39
Kaal	0.43
Mõõtmed (L x K x S)	97.79 x 97.79 x 76.20
ABYC vastavus	Oui
Aktuaatori värv	Rouge
Aktuaatori stiil	Rotatif
Alternator Field Disconnect Wiring	F1, F2
Voolutugevus (A)	350
Ignition Protection Standards List	UL 1500, SAE J1171
Installation Location General	Près des batteries
Paigalduse tüüp	Montage en surface; Montage sur panneau arrière; Montage sur panneau avant
Valgusindikaator	Non
Mounting Centers Mm	76.20
Montaažipoltide suurus (meetermõõdustik)	M6
Nimipinge	48V
Operation Restriction Engine Running	Ne pas actionner moteur tournant
Pesade arv	0
Toote alamtüüp	Coupe-batterie
Lüliti funktsioon	Déconnexion/Connexion de batterie
Terminal Stud Design Type	Monobloc
Terminal Stud Torque Nm	15.82
UL sertifitseerimine	UL 1107

Detailed description

BLUE SEA e-Series ON/OFF 9004E lüliti-patarei on mõeldud ühe patarei usaldusväärseks juhtimiseks ühe või mitme tarbija gruppi, eelkõige sisemootoriga bensiini- ja diiselmootorite jaoks. See kuulub BLUE SEA Systems e-Series valikusse, pakkudes pidevat voolutugevust 350 A ja maksimaalset töötavpinget 48 V alalisvoolu, erinevalt m-Series mudelitest (300 A, 48 V alalisvoolu), mis on mõeldud välismootoritele ja väikestele mootoritele, ning HD-Series mudelitest (500–600 A, 32 V alalisvoolu), mis on mõeldud suurematele diiselmootoritele.

Tehnilised andmed ja kaitse

See lüliti-patarei tagab elektrilised omadused, sealhulgas 1 200 A hooajakestvusega 30 sekundiks ja 600 A vahelduva voolutugevusega 5 minutiks. Klemmide püünised on valmistatud tinaga kaetud vasest, suurusega 3/8"-16 (M10), tagades maksimaalse elektrijuhtivuse ja korrosioonikindluse. Ühe tervikuna disainitud püünised vähendavad ülekahumise riski ja nende pikkus 22,22 mm (7/8") võimaldab kasutada mitut 4/0 AWG (95 mm²) kaabliterminali. Soovitatav klemmide keeramismoment on 15,82 N·m (140 in-lb).

Turvalisus ja paigaldus

Mudel 9004E sisaldab süütamise kaitset (ignition protected), vastavalt UL 1500 ja SAE J1171 nõuetele, mis teeb selle sobivaks paigaldamiseks bensiinimootoriga veesõidukitesse. Alternatori väljalülitamise funktsioon (AFD) kaitseb alternatori dioode, kui lüliti pööratakse väljalülitamise asendisse mootori käivitamise ajal. Kest võimaldab paigaldamist pinnale või tagaseinale, ja see on sertifitseeritud IP66, tagades kaitse tugevate veesuihkude eest. See vastab Ameerika Paadi- ja Jahtiklubi (ABYC) nõuetele patareilülitite kohta, on sertifitseeritud UL 1107 ja vastab CE nõuetele ISO 8846 järgi.

Documentation

Type	Nom
	EN - Instructions - e-Series On-Off Battery Switch
	EN - M Series, E Series, And Hd Series Battery Switch Ope... - e-Series On-Off Battery Switch
	EN - E Series Battery Switches - e-Series On-Off Battery Switch
	EN - Manual - e-Series On-Off Battery Switch
	EN - Certificate - e-Series On-Off Battery Switch
	EN - Certificate - e-Series On-Off Battery Switch
	EN - Certificate - e-Series On-Off Battery Switch

Expert review

Pol CONIN

Digitaalarenduse vastutaja

« Technical analysis: BLUE SEA e-Series 9004E battery switch with AFD »

The BLUE SEA e-Series ON/OFF 9004E battery switch is a pragmatic and reliable solution for managing power to embedded systems, particularly on sailboats and powerboats equipped with inboard gasoline or diesel engines. Its continuous rated capacity of 350 A DC and maximum voltage of 48 V DC make it suitable for medium-sized electrical configurations, distinguishing it from the m-Series for small applications and the HD-Series for high-power systems. The integration of the AFD (Alternator Field Disconnect) function is a major safety feature, protecting the alternator from potential damage in the event of an unexpected battery cut-off while the engine is running—a scenario commonly encountered in less optimized installations.

Installation is flexible with options for surface or rear-panel mounting, and the 3/8"-16 (M10) tinned copper studs with a length of 22.22 mm facilitate the connection of heavy-gauge cables (up to 4/0 AWG). It is critical to respect the tightening torque of 15.82 N·m (140 in-lb) to ensure optimal electrical connection and prevent overheating. This model integrates seamlessly into electrical systems compliant with ABYC and UL standards, and its IP66 rating ensures resistance to demanding marine environments. While it does not offer battery combining functions like the Dual Circuit Plus models, its simple ON/OFF design is ideal for isolating a single battery or a dedicated battery bank for a specific load, such as starting or main service, without added complexity.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Lüliti-patarei BLUE SEA e-Series sisselülitus/väljalülitus 9004E

79,03€

79,03€ ~~88,50€~~

Complete your installation with

Complementary equipment

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - ML-ACR Automatic Charging Relay with Manual Control - 12V DC 500A

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Automaatne laadimisrelais ML-ACR manuaalse juhtimisega – 12 V alalisvool 500 A

Ref : 7622B-BSS

245,47€

245,47€ ~~362,28€~~

Blue Sea Systems

Ampèremõõtur M2 DC

Ref : 1832-BSS

419,60€

419,60€ ~~466,08€~~

Mini ampèremètre OLED- Max 100A - Mini OLED Ammeter - Yellow

Blue Sea Systems

Minipingeamõõtur OLED – maksimaalselt 100A

Ref : 1732B-BSS

95,88€

95,88€ ~~116,82€~~

Panneau de disjoncteur Contura 4 positions - Water Resistant Circuit Breaker Panel 4 Position-Black

Blue Sea Systems

Kaitselüliti paneel Contura 4 positsiooniga

Ref : 8372-BSS

177,65€

177,65€ ~~198,96€~~

Panneau de disjoncteur Contura 8 positions - Water Resistant Circuit Breaker Panel 8 Position-Black

Blue Sea Systems

Contura 8 positsiooni voolukaitseseadeldise paneel

Ref : 8371-BSS

307,55€

307,55€ ~~339,72€~~

Panneau de disjoncteur étanche WeatherDeck® 12V DC - Gris 8 positions - WeatherDeck® 12V DC Waterproof Circuit Breaker Panel - Gray 8 Positions

Blue Sea Systems

Tihendatud WeatherDeck® 12 V alalisvoolu (DC) 8-kohaline sulavkaitsepaneel – hall

Ref : 4378-BSS

218,86€

218,86€ ~~258,24€~~

Tableau électrique 12 volts CC 4 positions

Blue Sea Systems

12 V alalisvoolu 4-kohaline elektrilauake

Ref : 1216-BSS

263,45€

263,45€ ~~327,20€~~

Bloc de fusibles à lame ST - 12 circuits avec bus négatif et couvercle - ST Blade Fuse Block - 12 Circuits with Negative Bus and Cover

Bloc de fusibles à lame ST - 12 circuits avec bus négatif et couvercle - Dimensioned Drawing

Blue Sea Systems

ST Blade 12-kontuuriline sulavkaitserühm negatiivse siini ja kaanega

Ref : 5026B-BSS

56,82€

56,82€ ~~79,50€~~

Disjoncteur série 285 montage en surface 25A - 285-Series Circuit Breaker - Surface Mount 25A

Disjoncteur série 285 montage en surface 25A - Dimensioned Drawing

Blue Sea Systems

25 A pindmontaažiga 285 seeria katkestur

Ref : 7180-BSS

59,48€

59,48€ ~~73,02€~~

Disjoncteur série 187 - Montage en surface 80 A - 187-Series Circuit Breaker - Surface Mount 80A

Disjoncteur série 187 - Montage en surface 80 A - Dimensioned Drawing

Blue Sea Systems

187 seeria katkestusseade – 80 A pinnasele monteeritav

Ref : 7142B-BSS

103,81€

103,81€ ~~117,38€~~

12/24V Dual USB 4.8A Chargers - Switch Mount - 12/24V Dual USB 4.8A Chargers - Switch Mount

Blue Sea Systems

Topelt USB-laadijad 12/24 V 4,8 A - Montaaž lülitisse

Ref : 1039-BSS

48,18€

48,18€ ~~57,72€~~

Alarme Floyd Bell Turbo Série - Floyd Bell Turbo Series Alarm

Blue Sea Systems

Floyd Bell Turbo seeria häire

Ref : 1070B-BSS

29,27€

29,27€ ~~34,98€~~

Frequently asked questions

Need help? Contact us

What is the primary function of the BLUE SEA e-Series ON/OFF 9004E battery switch?

This battery switch is designed to disconnect a single battery or a bank of batteries in an emergency, or when the boat is not in use. It provides reliable power management from a battery to a group of loads, particularly for inboard gasoline and diesel engines.

What is the continuous rated current of this battery switch?

The BLUE SEA e-Series ON/OFF 9004E battery switch has a continuous rated current of 350 A.

What is the maximum operating voltage supported by model 9004E?

The maximum operating voltage for this battery switch is 48 V DC.

Is the 9004E battery switch ignition-protected?

Yes, the 9004E model is ignition-protected. It meets UL 1500 and SAE J1171 standards, making it safe for installation on gasoline-powered boats. It is also certified to ISO 8846.

What is the particularity of the terminal studs on the e-Series battery switch?

The terminal studs are made of tinned copper, 3/8"-16 (M10), providing maximum conductivity and corrosion resistance. Their one-piece design reduces the risk of overheating, and their 22.22 mm (7/8") length accommodates multiple cable terminals.

What is the Alternator Field Disconnect (AFD) function and what is it used for?

The Alternator Field Disconnect (AFD) function protects the alternator's diodes. It activates if the switch is turned to OFF while the engine is running, preventing damage to the alternator.

What is the difference between Blue Sea Systems e-Series, m-Series, and HD-Series battery switches?

The e-Series models (such as the 9004E) have a continuous capacity of 350 A and are designed for inboard gasoline and diesel engines. The m-Series models have a continuous capacity of 300 A and are intended for outboards and small gasoline or diesel engines. The HD-Series models have a continuous capacity of 500-600 A and are for large diesel engines.

What is the ingress protection (IP) rating of this battery switch's housing?

The 9004E battery switch housing is IP66 rated, providing protection against powerful water jets.

What are the starting and intermittent capacities of the 9004E battery switch?

Starting capacity (30 seconds): 1 200 AIntermittent capacity (5 minutes): 600 A

How many battery inputs and switch positions does this model have?

The BLUE SEA e-Series ON/OFF 9004E battery switch is a single-circuit model. It has one battery input and two switch positions (ON/OFF).

What mounting options are available for this battery switch?

The 9004E battery switch housing allows surface mounting or rear-panel mounting.

Is the 9004E battery switch compatible with mounting hole patterns from other brands?

Yes, the 9004E battery switch housing is designed to be compatible with most mounting hole patterns of PERKO and Guest battery switches.

What is the recommended torque for terminal connections?

The recommended torque for terminal stud connections is 15.82 N·m (140 in-lb).

Which type of cable is recommended to meet the current specifications of the battery switch?

Use 4/0 AWG (95mm²) battery cables to meet the rated current specifications. Reducing cable size will lower current capacity.

Where should the battery switch be installed?

The battery switch must be installed in an easily accessible location close to the batteries.

What safety precautions must be taken before installing the battery switch?

Before any installation, it is imperative to disconnect the positive terminal of the battery. It is also advisable to consult a marine electrician for proper wiring.

How to connect the Alternator Field Disconnect (AFD) function?

To connect the AFD function, cut the wire running from the alternator to the voltage regulator. Then connect one end of the wire to terminal F1 of the switch and the other end to terminal F2.

Which safety and compliance standards does this battery switch meet?

This battery switch complies with all American Boat and Yacht Council (ABYC) requirements for battery switches. It is also UL 1107 certified for electrical power switches and meets UL 1500 external ignition protection and SAE J1171 standards. It is CE and ISO 8846 certified.

What are the mounting center dimensions for the 9004E battery switch?

The mounting centers for the 9004E battery switch are spaced 3.00" (76 mm) apart.

Can the battery switch be turned off while the engine is running?

No. It is essential not to set the switch to OFF while the engine is running. It is recommended to turn off all electrical devices before operating the switch.