e-Series Selector 3 Position Battery Switch with AFD - e-Series Selector 3 Position Battery Switch with AFD

e-Series Selector 3 Position Battery Switch with AFD - Dimensioned Drawing

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 10%

Blue Sea Systems

11001-BSS

Batteri katkestur BLUE SEA e-Series 3 positsiooni lüliti AFD-ga

L'interrupteur de batterie BLUE SEA e-Series Selector 3 Position avec AFD (11001-BSS) est une solution robuste pour la gestion de deux parcs de batteries sur les moteurs in-bord. Il offre une capacité continue de 350 A à 32 V DC et intègre une protection Alternator Field Disconnect pour l'alternateur. Conçu pour répondre aux exigences ABYC et UL, il garantit sécurité et fiabilité en milieu marin. Ce modèle fait partie de la gamme e-Series actuelle de Blue Sea, et est livré avec l'interrupteur seul.

Public priceGet pro pricing

72,24€

72,24€ ~~80,34€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Laosolekus

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Toote kasutuse eesmärk	Gestion et isolation des parcs de batteries, démarrage d'urgence
Lüliti tüüp	Sélecteur de batterie
Pidevvoolutugevus (A)	350
Puhkevool (A)	600
Startvool (A)	1200
Maksimaalne alalisvoolu pinge	32
Pooluste arv	1
Asendid	3
AFD-kaitse	Oui
Liitmise tüüp	Goujon (cuivre étamé)
Liitmise suurus	3/8"-16 (M10)
Juhtmeühenduse tüüp	Cosses à œillet
Juhtimise tüüp	Manuel rotatif
Montaažitüüp	Montage en surface / Montage sur panneau arrière / Montage sur panneau avant
IP-tunnus	IP66
Tööpinge vahemik	Jusqu'à 32V DC
Paneeli lõike läbimõõt (mm)	92.08
Töötemperatuuri vahemik	-40 à +85 °C
Kaal	0.52
Mõõtmed (L x K x S)	98 x 98 x 40.39
Garantii	99.0
ABYC vastavus	Meets all ABYC requirements
Aktuaatori värv	Rouge
Actuator Feedback Type	Tactile
Aktuaatori stiil	Bouton rotatif
Alternator Diode Protection Mechanism	Réduction de la sortie de l'alternateur à zéro
Voolutugevus (A)	350
Battery Inputs Count	2
Cable Clearance Mm	27.9
Cable Entry Count	1
Cable Size To Meet Ratings Awg	4/0 AWG
Cable Size To Meet Ratings Mm2	120
Cable Terminal Torque Nm	24.86
Cranking Current Duration	30
Emergency Start Capability	Non
Ühilduvad mootori tüübid	In-bord essence ou diesel
Flange Nut Material	Acier inoxydable
High Power Application Focus	Haute puissance, fiabilité et faible génération de chaleur
Ignition Protection Standard	SAE J1171, ISO 8846
Paigalduse tüüp	Montage en surface / Montage sur panneau arrière / Montage sur panneau avant
Intermittent Current Duration	5
Valgusindikaator	false
Make Before Break Feature	Oui
Max Accepted Cable Size Mm2	120
Maksimaalne järjestikühenduste arv akupatareidel	2.0
Maksimaalne laadimisvool (A)	350.0
Maksimaalne väljalaskevool (A)	350.0
Mounting Area Required Sq In	15
Mounting Compatibility Brands	Perko, Guest
Mounting Hardware Type	Vis 1/4" (M6)
Kinnituse orientatsioon	Montage en surface, sur panneau arrière ou sur panneau avant
Tipptühjendustugevus	1200.0
Toote rakendusala (keskkond)	Marin et embarqué
Toote alamtüüp	Interrupteur de batterie
Recommended Cable Connection Method	Un câble 4/0 AWG à chaque borne batterie, deux câbles 4/0 AWG à la borne commune
Soovitatav pidev laadimise vool	350.0
Selector Positions Description	Batterie 1, Batterie 2, Arrêt
Säilitus temperatuurivahemik	-40 à +85 °C
Lüliti funktsioon	Sélection de batterie
Terminal Stud Length Mm	22.22
Terminal Stud Material	Cuivre étamé
Terminal Stud One Piece Design	Oui
Terminal Torque Nm	15.82
Ul Certification Standard	UL 1107, UL 1500
Warranty Period Text	Garantie à vie

Detailed description

Disainitud merenduse ja pardal kasutatavate elektripaigaldiste jaoks pakub BLUE SEA e-Series Selector 3 positsiooni lüliti (tüübitähis 11001) AFD-ga (Alternator Field Disconnect) töökindla juhtimise kahe akupargi jaoks. See 3 positsiooniga lüliti (akupark 1, akupark 2, väljalülitus) on mõeldud rakendusteks, mis nõuavad kõrget võimsust, töökindlust ning vähest soojuse teket, näiteks paatidel, mis on varustatud sisemootoriga bensiini- või diiselmootoriga.

Töökindlus ja tehnilised andmed

Mudel 11001 tagab elektrilised omadused, võimaldades 1200 A startervoolu 30 sekundiks. Lüliti talub vahelduvvoolu 600 A (5 minutit) ja püsivoolu 350 A 32 V alalispingel. Kinnituspulkadena kasutatavad tinastatud vasest 3/8"-16 (M10) poldid tagavad maksimaalse elektrijuhtivuse ja korrosioonikindluse, pikkusega 22,22 mm, et mahutada mitmeid kaablikontakte. Soovitatav keermestusmoment on 15,82 N·m (140 in-lb). Nimiväärtuste saavutamiseks on vajalik kasutada 4/0 AWG (120 mm²) kaableid.

Täiendavad funktsioonid ja vastavus

11001 mudeli eripäraks on AFD (Alternator Field Disconnect) funktsioon, mis kaitseb generaatori dioode mootori käivitamata oleku korral, vähendades generaatori väljundpinget nullini. See kaitse on oluline generaatori laadimissüsteemi pikaealisuse tagamiseks. Lüliti on ka süütamiskaitstud (ignition protected), vastates SAE J1171, UL 1500 ja ISO 8846 nõuetele, mis teeb selle sobivaks paatidele, mis kasutavad bensiinimootoreid. Lüliti vastab ABYC nõuetele akulülitite kohta ja on sertifitseeritud UL 1107 järgi. Kest võimaldab paigaldamist nii pinnale kui ka tagumisele paneelile, pakkudes paigaldusvõimaluste paindlikkust. Erinevalt e-Series seeria Selector 4 positsiooni või Dual Circuit Plus mudelitest ei ole see lüliti varustatud funktsiooniga "make-before-break" akuparkide vahelisel ümberlülitusel, mis tähendab, et akupargi vahetamiseks tuleb läbida positsioon "Väljalülitus".

Documentation

Type	Nom
	EN - Instructions - e-Series Selector 3 Position Battery Switch with AFD
	EN - M Series, E Series, And Hd Series Battery Switch Ope... - e-Series Selector 3 Position Battery Switch with AFD
	EN - E Series Battery Switches - e-Series Selector 3 Position Battery Switch with AFD
	EN - Manual - e-Series Selector 3 Position Battery Switch with AFD
	EN - Certificate - e-Series Selector 3 Position Battery Switch with AFD
	EN - Certificate - e-Series Selector 3 Position Battery Switch with AFD

Expert review

Pol CONIN

Digitaalarenduse vastutaja

« Technical analysis: BLUE SEA e-Series Selector 3-position battery switch with AFD »

The BLUE SEA e-Series Selector 3-position battery switch with AFD (model 11001-BSS) is a relevant solution for vessels equipped with two battery banks, typically a starter bank and a house bank. Its primary function is to isolate these banks, allowing selection of power from battery 1 or battery 2, or cutting all power in the OFF position. This is fundamental for electrical safety aboard and energy management.

The major added value of this model lies in its Alternator Field Disconnect (AFD) system. This feature is crucial to prevent irreversible damage to the alternator diodes if the switch is toggled to OFF while the engine is running. Many competing switches or basic models in Blue Sea's m-Series lack this protection, requiring manual precautions or additional circuits. The integration of AFD simplifies installation and enhances the reliability of the charging system.

For installation, it must be mounted near the batteries and the specified torque values (15.82 N·m) for 3/8"-16 (M10) studs must be respected; these are tin-plated copper for better durability in marine environments. Using 4/0 AWG (120 mm²) cables is recommended to ensure nominal performance. It is crucial to note that, unlike "make-before-break" switches (such as certain Selector 4-position or Dual Circuit Plus e-Series models), switching from "Battery 1" to "Battery 2" (or vice versa) must be done by passing through the "OFF" position to avoid any uncontrolled interruption of charge or discharge. This is a limitation to consider for systems that cannot tolerate any momentary power interruption. This model is ideal for owners seeking simple and secure management of two batteries with built-in alternator protection, without the complexity or cost of a four-position switch or a Dual Circuit Plus if they do not require the direct combination function via the switch.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Batteri katkestur BLUE SEA e-Series 3 positsiooni lüliti AFD-ga

72,24€

72,24€ ~~80,34€~~

Complete your installation with

Complementary equipment

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - ML-ACR Automatic Charging Relay with Manual Control - 12V DC 500A

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Automaatne laadimisrelais ML-ACR manuaalse juhtimisega – 12 V alalisvool 500 A

Ref : 7622B-BSS

245,47€

245,47€ ~~362,28€~~

Blue Sea Systems

Ampèremõõtur M2 DC

Ref : 1832-BSS

419,60€

419,60€ ~~466,08€~~

Mini ampèremètre OLED- Max 100A - Mini OLED Ammeter - Yellow

Blue Sea Systems

Minipingeamõõtur OLED – maksimaalselt 100A

Ref : 1732B-BSS

95,88€

95,88€ ~~116,82€~~

Frequently asked questions

Need help? Contact us

What are the main functions of the Blue Sea e-Series Selector 3-position battery switch with AFD?

The switch is designed to manage two battery banks. It isolates starting and service circuits and allows combining both battery banks for emergency starting. It has three positions: battery 1, battery 2, and off (OFF).

What does the 'AFD' (Alternator Field Disconnect) function on this switch mean?

The AFD (Alternator Field Disconnect) function is a distinctive feature that protects the alternator's diodes. If the switch is turned off while the engine is running, it reduces the alternator output to zero, which is critical for the longevity of the charging system.

What is the DC current capacity of this battery switch?

This switch has a DC current capacity of 350 amperes at 32 V DC.

What is its cranking rating?

This switch has a cranking rating of 1 200 amperes for 30 seconds.

Is the switch ignition-protected for use on gasoline-powered boats?

Yes, this switch is ignition-protected. It meets SAE J1171, UL 1500, and ISO 8846 standards, making it safe for installation on boats with gasoline engines.

Which types of boats are best suited to this battery switch?

This switch is specifically designed for marine applications requiring high power, proven reliability, and low heat generation, such as on boats equipped with inboard gasoline or diesel engines.

What material are the terminal studs made of and what are their dimensions?

The terminal studs are made of tinned copper, ensuring maximum conductivity and corrosion resistance. They have a size of 3/8"-16 (M10) and a length of 22.22 mm (7/8") to accommodate multiple cable lugs.

What is the maximum operating voltage of this switch?

The maximum operating voltage of this switch is 32 V DC.

What are the certifications and compliance standards for this product?

This product meets ABYC requirements for battery switches, is UL listed (UL 1107 for electrical power switches), and complies with external ignition protection requirements UL 1500 and SAE J1171. It is also CE and ISO 8846 certified.

Is the switch waterproof?

Yes, the switch is rated IP66, meaning it is protected against powerful water jets.

What is the intermittent current rating of this switch?

The switch has an intermittent current rating of 600 amperes for 5 minutes, in accordance with UL 1107.

Where should I install this battery switch?

Install the switch in an easily accessible location close to the batteries.

What are the possible mounting types for this switch?

The switch housing design allows for surface mounting or rear-panel mounting.

What is the recommended cable gauge for this switch to meet its rated values?

To fully meet the switch's rated values, 4/0 AWG (120 mm²) cables must be used.

How to connect battery cables to the switch terminals?

To maintain the rated value, a 4/0 AWG (120 mm²) cable must be connected to each battery terminal, and two 4/0 AWG (120 mm²) cables to the common terminal. Battery cable lugs must be secured under the safety washer and nut.

What is the recommended torque for the switch terminal studs?

The recommended torque for the switch terminal studs is 15.82 N·m (140 in-lb). For battery cable terminals secured under the nut, the torque is 24.86 N·m (220 in-lb).

What precautions should I take before installing the battery switch?

Before installation, it is imperative to disconnect the positive terminal of the battery. It is also strongly recommended to consult a marine electrician to ensure correct and secure wiring.

How to wire the AFD (Alternator Field Disconnect) function?

To wire the AFD function, disconnect the wire running from the alternator to the voltage regulator. Connect one end to terminal F1 and the other end to terminal F2 of the switch.