AGM akupata 12 V 270 Ah

AGM technology (Absorbent Glass Mat) immobilizes the electrolyte entirely. This means the battery is completely sealed, maintenance-free, and releases no gas during normal use. It also has very low internal resistance, ideal for rapid high-current discharges.

This battery is in Super 8D format. Its external dimensions (including handles) are 522 x 268 x 226 mm and it weighs 73 kg. Due to its significant weight, it is recommended to use appropriate handling equipment during installation.

Yes, absolutely. Although it offers a massive 270 Ah energy reserve for house loads, its design provides excellent starting performance. It can deliver a cold cranking current (CCA) of 1200 A (SAE) or 750 A (DIN).

No, this battery is 100% maintenance-free. Never open it or add acid or distilled water. Simply keep it clean with a damp cloth and check the terminals’ tightness regularly.

Thanks to its watertight design, it can theoretically be mounted in any position. However, the manufacturer strongly recommends installation in an upright (vertical) position for optimal performance and safety.

When installing a battery bank, it is essential to leave at least 1 cm of space between each battery to allow for adequate heat dissipation.

You must use a charger with a 3-stage IUoUo charging curve. Incomplete or unsuitable charging can irreversibly damage the battery.

The maximum recommended charging current for this Mastervolt AGM 12/270Ah battery is 76.5 A.

At a reference temperature of 25°C, voltage settings should be as follows:

Absorption voltage: 14.25 V (for a maximum of 5 hours)Float voltage (maintenance): 13.80 V
A temperature compensation of -30 mV/°C is highly recommended.

No, mixing old and new batteries is strongly discouraged. For series or parallel wiring, all batteries must be of the same brand, type, capacity, and have the same state of charge.

The battery is equipped with M8 threaded terminals (type A). For optimal connection, it is recommended to directly attach eyelet terminals to the battery poles. It can also be combined with standard battery terminals.

To ensure a perfect electrical contact and avoid any overheating, screw connections must be tightened to a torque between 14.7 and 19.6 Nm.

To maximize the lifespan of your AGM battery, avoid regular deep discharges beyond 50% of its nominal capacity. Recharge it immediately after any significant discharge.

A resting voltage below 12.3 V indicates the battery is deeply discharged. You must recharge it to 100 % immediately to prevent sulfation and irreversible damage to the lead plates.

The allowable operating temperature range is between -20°C and 55°C, with a recommended nominal temperature of 25°C. Note that each 10°C increase above 25°C reduces battery lifespan by half, while lower temperatures decrease available capacity.

Although AGM batteries do not release any gas during normal use, a charger fault (overcharging) can cause the release of an explosive hydrogen gas mixture. It is therefore essential to ensure adequate ventilation of the storage compartment.

Use only a soft, damp cloth to clean the housing. Never use solvents, additives, acids, or abrasive products. Ensure terminals remain clean and free of corrosion.

Yes, Mastervolt AGM batteries are supplied charged and are immediately ready for use once installed on board.

Yes, due to the use of thicker lead plates, this model is perfectly suited for moderate cyclic use (service battery bank) while maintaining excellent power for engine starts.

Mastervolt provides a two-year warranty on this AGM 12/270Ah battery model, provided it is installed and used in accordance with the technical manual recommendations.