SBG Ellipse A/D USB-RS-232 kaabel (3 m)

This cable is an essential accessory designed for integrating and operating SBG Systems Ellipse-series inertial navigation systems. It combines a built-in USB to RS-232 converter, enabling reliable connection between your Ellipse sensor and a PC. Its primary function is to facilitate communication for configuration, diagnostics, and data acquisition.

Yes, this cable is specifically designed to ensure perfect compatibility with SBG Systems Ellipse series sensors, including the Ellipse-A and Ellipse-D models. It is particularly critical for standard Ellipse sensors and earlier generations of Ellipse-D that require external power.

The SBG Ellipse A/D USB to RS-232 cable is 3 meters long, providing sufficient flexibility for various installation setups.

Yes, this cable can directly power the Ellipse sensor via your PC's USB port. This feature is particularly useful for standard Ellipse sensors and earlier generations of Ellipse-D that require external power. Note that 3rd-generation Ellipse-D models are powered directly via USB and do not require this cable-based power feature.

The cable is designed for a 'plug-and-play' connection, meaning it is usually automatically recognized by most modern operating systems. If specific drivers were required for the USB-to-RS-232 converter, they would typically be provided by the manufacturer or available online, but the 'plug-and-play' nature greatly simplifies installation.

The SBG Ellipse A/D USB to RS-232 cable (3m) is manufactured from premium materials and has undergone rigorous durability testing. Its design is optimized for demanding industrial and field environments, ensuring robustness consistent with the quality of the Ellipse sensors themselves, whose boxed versions are rated IP68 (dustproof and waterproof).

This cable is specifically designed by SBG Systems to ensure perfect compatibility and essential signal integrity with their Ellipse series sensors. Although it is a USB to RS-232 converter, its optimization is tailored to the precise requirements of Ellipse systems. To guarantee performance and reliability, it is recommended to use it exclusively with SBG Ellipse sensors.

Thanks to its 'plug-and-play' design and built-in USB to RS-232 converter, this cable greatly simplifies the connection between your SBG Ellipse sensor and a PC. It ensures reliable data transmission and is essential for initial configuration, system diagnostics, and continuous data acquisition, which is critical for Ellipse system applications.

The SBG Ellipse A/D USB to RS-232 cable enables the transmission of various types of data from your SBG Ellipse sensor. The Ellipse series sensors support multiple output protocols via their main serial interface (RS-232):

sbgEcom (binary): SBG Systems' proprietary binary protocol.NMEA: Standardized messages widely used in the maritime sector.REST API: For modern integrations.Other third-party protocols may also be supported.These protocols allow the transmission of orientation, position, motion, and other inertial data essential for configuration, diagnostics, and data acquisition.

Yes, the SBG Ellipse A/D USB to RS-232 cable is designed for a "plug-and-play" connection. With its built-in USB to RS-232 converter, it provides a simplified and immediate connection between your SBG Ellipse sensor and any PC. This greatly simplifies installation and use without requiring initial complex configuration.

The SBG Ellipse A/D USB to RS-232 cable supports a maximum transmission speed of up to 2 Mbps via its main serial interface (RS-232). This high throughput capacity is specified for the serial interfaces of SBG Ellipse-A and Ellipse-N/D sensors, ensuring fast and efficient communication for all your applications.

SBG Systems' specific design of this cable is a crucial factor in the accuracy of inertial measurements. Unlike generic cables, this cable is engineered to ensure perfect compatibility and essential signal integrity. This integrity is vital for reliable data transmission, ensuring that the inertial data collected by the Ellipse sensors is transmitted with the highest fidelity, which is fundamental to measurement accuracy and reliability.

Yes, this cable is fully suitable for integration in demanding environments such as marine vessels, land vehicles, UAVs, or fixed platforms. It is manufactured using premium materials and subjected to rigorous durability testing, optimized for industrial and harsh field environments. This robustness aligns with the quality of the Ellipse sensors themselves, whose data transmission reliability is critical for applications in these domains.

Yes, this cable facilitates the connection between your SBG Ellipse sensor and a PC, which is essential for maintenance and configuration operations. SBG Ellipse sensors receive lifetime firmware updates. By connecting via this cable, users can access the necessary software tools to perform these updates, ensuring the sensor always operates with the latest improvements and features.

While the Ellipse sensors themselves (housing versions) are rated IP68, meaning they are dust- and water-resistant, the cable description states it is "made from premium materials and subjected to rigorous durability testing" and "optimized for demanding industrial and field environments." However, no specific IP rating is mentioned for the cable itself in the provided information. It is designed to operate reliably in these harsh environments.