Traadita laadija Edge 15W – püsijalaga alusega

The Scanstrut Edge 15W wireless charger delivers adaptive output power of 5W, 7.5W, 10W or 15W. The actual output power depends on the connected phone model, as the charger automatically adjusts for optimal charging.

The Scanstrut Edge 15W wireless charger is certified IPX6 at the front and rear. This certification ensures full protection against heavy water spray, making it perfectly suitable for marine environments.

The charger is equipped with LED indicators for clear diagnostics:

A constant green LED indicates the device is charging.A constant red LED indicates the charger is in standby mode (powered on).A flashing red LED alerts to a non-compatible Qi foreign object placed on the charger or a thermal issue (internal temperature too high or too low).Alternating flashing green and red LEDs indicate that the input current is too low.

Yes, the Scanstrut Edge 15W charger is designed to be compatible with 12V and 24V marine electrical systems. It accepts an input voltage of 10–30V DC, making it versatile for most marine installations.

For installing the Scanstrut Edge 15W charger, you will need the following tools:

A drill with a 6 mm (0.24”) bit for the central hole.A pilot drill bit: 2.5 mm (3/32”) for soft materials (plywood) or 3 mm (1/8”) for hard materials (fiberglass, acrylic, hardwood).A Pozidriv screwdriver.Sealant for waterproofing.Three #6 x 1 1/4” (32 mm) self-tapping screws are included with the product.

For optimal installation, choose a mounting location that provides a clear viewing angle, allows full extension of the charger’s jaw, and a 90° adjustment. It is critical to ensure the area behind the mounting location is clear of wires, fuel, and any other hazardous objects before drilling. If the product is mounted outdoors, it must be securely installed above the waterline and not exposed to submersion risk. Avoid areas exposed to heat-emitting devices and poorly ventilated zones. Do not install it in hazardous or flammable atmospheres, such as an engine room.

The Scanstrut Edge 15W charger complies with several international certifications, attesting to its reliability and safety. It is certified:

Qi (for wireless charging)CE (European conformity)FCC (Federal Communications Commission)ROHS (Restriction of Hazardous Substances)C-Tick (Australia/New Zealand)UN ECE R10 (vehicle regulation)PSE (Product Safety Electrical Appliance and Material)