Läbipääsukaasik ühenduskaabli jaoks kuni Ø40 mm, kaabli läbimõõduga 12–15 mm – must komposiit

This Scanstrut DS40-P-BLK deck gland is designed to accommodate connectors with a diameter up to 40 mm.

This deck gland is specifically suitable for cables with a diameter between 12 and 15 mm.

The Scanstrut DS40-P-BLK deck gland is made of black composite, providing good resistance in marine environments while remaining lightweight.

For installing this deck gland, you will need the following tools:

A Pozidriv screwdriverSilicone sealantA hole saw of Ø40 mmA drill bit of Ø2.5 mm or Ø3 mm (depending on the hardness of your mounting surface)

The DS40-P-BLK is the black composite (plastic) version, which is a lightweight and economical alternative. The DS40-S, on the other hand, is the version made of stainless steel, offering different robustness and finish.

The main difference lies in their capacity and drilling size. The DS40 is designed for connectors up to Ø40 mm and cables from 12-15 mm, requiring a Ø40 mm hole. The DS30 is suitable for cables from 9-14 mm and requires a Ø30 mm hole.

Four No. 6X16 self-tapping screws are included in the kit for mounting the deck gland onto your bracket.

Yes, applying silicone is essential to ensure a perfect seal around the drilled hole and under the deck gland base, thus protecting the inside of your vessel from water.

The drill bit diameter for pilot holes depends on the material of your support:

For soft materials (e.g., plywood): use a 2.5 mm (3/32 inch) drill bit.

For hard materials (e.g., fiberglass, acrylic, hardwood): use a 3 mm (1/8 inch) drill bit.

Yes, the Scanstrut DS40-P-BLK deck gland is a waterproof deck gland specifically designed to provide reliable water protection for cable passes through boat decks.

Yes, this deck gland is designed for vertical installation, making it ideal for cable runs through decks or vertical bulkheads on your vessel.

The black M4X10 bolt is a key component for assembling the through-hull fitting. It secures the hull to the base, ensuring the assembly remains rigid.

Yes, the Scanstrut DS40-P-BLK is a marine-grade product designed specifically to withstand the demanding conditions of marine environments, thanks to its black composite construction.

To ensure optimal watertightness, it is imperative to apply marine-grade silicone around the drilled hole and under the through-hull fitting base before securing it with the provided screws. Ensure all surfaces are clean and dry before application.

Yes, the Scanstrut DS40-P-BLK through-hull fitting is supplied with detailed installation instructions to guide you step-by-step through the assembly process.

This deck gland is optimized for cables with a diameter of 12 to 15 mm. For cables with a smaller diameter, it would be more appropriate to consider a different Scanstrut model, such as the DS30, which is designed for 9–14 mm cables, to ensure optimal sealing and compatibility.