e-Series Selector 3 Position Battery Switch with AFD - e-Series Selector 3 Position Battery Switch with AFD

e-Series Selector 3 Position Battery Switch with AFD - Dimensioned Drawing

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Uštedite 10%

Blue Sea Systems

11001-BSS

Isključivač baterije selektor e-Series 3 položaja s AFD

L'interrupteur de batterie BLUE SEA e-Series Selector 3 Position avec AFD (11001-BSS) est une solution robuste pour la gestion de deux parcs de batteries sur les moteurs in-bord. Il offre une capacité continue de 350 A à 32 V DC et intègre une protection Alternator Field Disconnect pour l'alternateur. Conçu pour répondre aux exigences ABYC et UL, il garantit sécurité et fiabilité en milieu marin. Ce modèle fait partie de la gamme e-Series actuelle de Blue Sea, et est livré avec l'interrupteur seul.

Public priceGet pro pricing

72,24€

72,24€ ~~80,34€~~

UK Isporuke izračunate u trenutku plaćanja.

Na zalihi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Technical specifications

Namjena proizvoda	Gestion et isolation des parcs de batteries, démarrage d'urgence
Tip prekidača	Sélecteur de batterie
Struja (A) – kontinuirana	350
Povremena struja (A)	600
Struja pokretanja (A)	1200
Maksimalni istosmjerni napon	32
Broj polova	1
Pozicije	3
Zaštita AFD	Oui
Tip priključka	Goujon (cuivre étamé)
Veličina priključka	3/8"-16 (M10)
Vrsta ožičenja/veze	Cosses à œillet
Vrsta upravljanja	Manuel rotatif
Vrsta montaže	Montage en surface / Montage sur panneau arrière / Montage sur panneau avant
IP zaštitni stupanj	IP66
Raspon radnog napona	Jusqu'à 32V DC
Promjer otvora za ugradnju ploče (mm)	92.08
Raspon radne temperature	-40 à +85 °C
Težina	0.52
Dimenzije (Š x V x D)	98 x 98 x 40.39
Jamstvo	99.0
Usklađenost s ABYC standardom	Meets all ABYC requirements
Boja aktuatora	Rouge
Actuator Feedback Type	Tactile
Stil aktuatora	Bouton rotatif
Alternator Diode Protection Mechanism	Réduction de la sortie de l'alternateur à zéro
Jakost struje (A)	350
Battery Inputs Count	2
Cable Clearance Mm	27.9
Cable Entry Count	1
Cable Size To Meet Ratings Awg	4/0 AWG
Cable Size To Meet Ratings Mm2	120
Cable Terminal Torque Nm	24.86
Cranking Current Duration	30
Emergency Start Capability	Non
Kompatibilnost s tipom motora	In-bord essence ou diesel
Flange Nut Material	Acier inoxydable
High Power Application Focus	Haute puissance, fiabilité et faible génération de chaleur
Ignition Protection Standard	SAE J1171, ISO 8846
Vrsta ugradnje	Montage en surface / Montage sur panneau arrière / Montage sur panneau avant
Intermittent Current Duration	5
LED indikator	false
Make Before Break Feature	Oui
Max Accepted Cable Size Mm2	120
Maksimalan broj baterija u serijskom spoju	2.0
Maksimalna struja punjenja (A)	350.0
Maksimalna struja pražnjenja (A)	350.0
Mounting Area Required Sq In	15
Mounting Compatibility Brands	Perko, Guest
Mounting Hardware Type	Vis 1/4" (M6)
Orijentacija montaže	Montage en surface, sur panneau arrière ou sur panneau avant
Vršna struja pražnjenja	1200.0
Okoliš primjene proizvoda	Marin et embarqué
Podvrsta proizvoda	Interrupteur de batterie
Recommended Cable Connection Method	Un câble 4/0 AWG à chaque borne batterie, deux câbles 4/0 AWG à la borne commune
Preporučena kontinuirana struja pražnjenja	350.0
Selector Positions Description	Batterie 1, Batterie 2, Arrêt
Raspon temperature skladištenja	-40 à +85 °C
Funkcija prekidača	Sélection de batterie
Terminal Stud Length Mm	22.22
Terminal Stud Material	Cuivre étamé
Terminal Stud One Piece Design	Oui
Terminal Torque Nm	15.82
Ul Certification Standard	UL 1107, UL 1500
Warranty Period Text	Garantie à vie

Detailed description

Namijenjen je električnim i brodskim sustavima, prekidač baterije BLUE SEA e-Series Selector 3 položaja s AFD (šifra 11001) omogućuje pouzdano upravljanje dvjema baterijskim grupama. Ovaj selektor s 3 položaja (baterija 1, baterija 2, isključeno) posebno je namijenjen aplikacijama koje zahtijevaju visoku snagu, dokazanu pouzdanost i nisku toplinsku emisiju, kao što su brodovi opremljeni unutarnjim benzinskim ili dizelskim motorima.

Performanse i tehničke karakteristike

Model 11001 osigurava električnu performansu s kapacitetom pokretanja od 1 200 A tijekom 30 sekundi. Podržava prekidnu struju od 600 A (5 minuta) i kontinuiranu struju od 350 A pri 32 V DC. Njegove bakrene pozlaćene stezaljke 3/8"-16 (M10) osiguravaju maksimalnu vodljivost i otpornost na koroziju, s dužinom od 22,22 mm za prihvat višestrukih kabelskih stezaljki. Preporučeni moment zatezanja je 15,82 N·m (140 in-lb). Za postizanje nazivnih vrijednosti potrebna je upotreba kabela 4/0 AWG (120 mm²).

Napredne funkcije i usklađenost

Karakteristična značajka modela 11001 je funkcija Alternator Field Disconnect (AFD), koja štiti diode alternatora u slučaju isključivanja prekidača dok je motor u radu, smanjujući izlaz alternatora na nulu. Ova zaštita ključna je za trajnost sustava punjenja. Prekidač je također zaštićen od paljenja (ignition protected) i odgovara zahtjevima SAE J1171, UL 1500 i ISO 8846, što ga čini sigurnim za ugradnju na benzinske brodove. Usklađen je s ABYC zahtjevima za prekidače baterija i naveden je u UL 1107. Njegov kućište omogućuje ugradnju na površinu ili na stražnju stranicu panela, nudeći fleksibilnost u ugradnji. Za razliku od modela Selector 4 položaja ili Dual Circuit Plus iz e-Series serije, ovaj prekidač nema funkciju "make-before-break" za prebacivanje između skupina 1 i 2, što znači da je potrebno proći kroz položaj "ISKLJUČENO" prije promjene skupine.

Documentation

Type	Nom
	EN - Instructions - e-Series Selector 3 Position Battery Switch with AFD
	EN - M Series, E Series, And Hd Series Battery Switch Ope... - e-Series Selector 3 Position Battery Switch with AFD
	EN - E Series Battery Switches - e-Series Selector 3 Position Battery Switch with AFD
	EN - Manual - e-Series Selector 3 Position Battery Switch with AFD
	EN - Certificate - e-Series Selector 3 Position Battery Switch with AFD
	EN - Certificate - e-Series Selector 3 Position Battery Switch with AFD

Expert review

Pol CONIN

Digitalni odgovorni

« Technical analysis: BLUE SEA e-Series Selector 3-Position Battery Switch with AFD »

The BLUE SEA e-Series Selector 3-Position Battery Switch with AFD (model 11001-BSS) is a relevant solution for vessels equipped with two battery banks, typically a starter bank and a house bank. Its primary function is to isolate these banks, allowing you to select power from Battery 1, Battery 2, or cut all power in the OFF position. This is fundamental for electrical safety on board and energy management.

The major added value of this model lies in its Alternator Field Disconnect (AFD) system. This feature is crucial for preventing irreversible damage to the alternator diodes if the switch is toggled to OFF while the engine is running. Many competing switches or basic models in Blue Sea's m-Series lack this protection, requiring manual precautions or additional circuits. The integration of AFD simplifies installation and enhances the reliability of the charging system.

For installation, it must be mounted near the batteries and the specified torque values (15.82 N·m) for 3/8"-16 (M10) studs must be respected; these are tin-plated copper for improved durability in marine environments. Using 4/0 AWG (120 mm²) cables is recommended to ensure nominal performance. It is critical to note that, unlike "make-before-break" switches (such as certain Selector 4-Position or Dual Circuit Plus e-Series models), switching from the "Battery 1" position to "Battery 2" (or vice versa) must be done by passing through the "OFF" position to avoid uncontrolled interruption of charge or discharge. This is a limitation to consider for systems that cannot tolerate any momentary power interruption. This model is ideal for owners seeking simple and secure management of two batteries with integrated alternator protection, without the complexity or cost of a four-position switch or Dual Circuit Plus if they do not require direct combination via the switch.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Isključivač baterije selektor e-Series 3 položaja s AFD

72,24€

72,24€ ~~80,34€~~

Frequently Asked Questions

Need help? Contact us

What are the main functions of the Blue Sea e-Series Selector 3-position battery switch with AFD?

The switch is designed to manage two battery banks. It isolates starting and service circuits and allows combining both battery banks for emergency starting. It has three positions: battery 1, battery 2, and off (OFF).

What does the 'AFD' (Alternator Field Disconnect) function on this switch mean?

The AFD (Alternator Field Disconnect) function is a distinctive feature that protects the alternator's diodes. If the switch is turned off while the engine is running, it reduces the alternator output to zero, which is critical for the longevity of the charging system.

What is the DC current capacity of this battery switch?

This switch has a DC current capacity of 350 amperes at 32 V DC.

What is its cranking current capacity?

The cranking current capacity of this switch is 1,200 amperes for 30 seconds.

Is the switch ignition-protected for use on gasoline-powered boats?

Yes, this switch is ignition-protected. It meets the requirements of SAE J1171, UL 1500, and ISO 8846 standards, making it safe for installation on boats with gasoline engines.

Which types of boats are best suited to this battery switch?

This switch is specifically designed for marine applications requiring high power, proven reliability, and low heat generation, such as on boats equipped with inboard gasoline or diesel engines.

What material are the terminal studs made of and what are their dimensions?

The terminal studs are made of tin-plated copper, ensuring maximum conductivity and corrosion resistance. They have a size of 3/8"-16 (M10) and a length of 22.22 mm (7/8") to accommodate multiple cable lugs.

What is the maximum operating voltage of this switch?

The maximum operating voltage of this switch is 32 V DC.

What are the certifications and compliance standards for this product?

This product meets ABYC requirements for battery switches, is UL listed (UL 1107 for power switches), and complies with external ignition protection standards UL 1500 and SAE J1171. It is also CE and ISO 8846 certified.

Is the switch waterproof?

Yes, the switch is rated IP66, meaning it is protected against powerful water jets.

What is the intermittent current rating of this switch?

The switch has an intermittent current rating of 600 amperes for 5 minutes, in accordance with UL 1107.

Where should I install this battery switch?

Mount the switch in an easily accessible location close to the batteries.

What are the possible mounting types for this switch?

The switch housing design allows for surface mounting or rear-panel mounting.

What is the recommended cable gauge for this switch to meet its rated values?

To fully meet the switch’s rated values, 4/0 AWG (120 mm²) cables must be used.

How to connect battery cables to the switch terminals?

To meet the assigned value, a 4/0 AWG (120 mm²) cable must be connected to each battery terminal and two 4/0 AWG (120 mm²) cables to the common terminal. Battery cable lugs must be secured under the lock washer and nut.

What is the recommended tightening torque for the switch terminal studs?

The recommended tightening torque for the switch terminal studs is 15.82 N·m (140 in-lb). For battery cable terminals secured under the nut, the tightening torque is 24.86 N·m (220 in-lb).

What precautions should I take before installing the battery switch?

Before installation, it is imperative to disconnect the battery's positive terminal. It is also strongly recommended to consult a marine electrical professional to ensure correct and secure wiring.

How to wire the AFD (Alternator Field Disconnect) function?

To wire the AFD function, disconnect the wire running from the alternator to the voltage regulator. Connect one end to terminal F1 and the other end to terminal F2 of the switch.