Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Uštedite 20%

CZone

80-911-0013-00

Sučelje za signal CZone SI

The CZone SI interface (80-911-0013-00) integrates 6 universal inputs (0-34V DC, 0-1000 Ohms) into the NMEA 2000 network for intelligent automation and monitoring. This IPX5 module is compatible with tank level sensors, switches, and voltage or resistive signals. It is supplied with the main module.

Public priceGet pro pricing

287,82€

287,82€ ~~362,16€~~

UK Isporuke izračunate u trenutku plaćanja.

Malo na stanju

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Technical specifications

Namjena proizvoda	L'interface de signal CZone SI connecte le système CZone à des capteurs externes, des alarmes et des dispositifs de commutation, permettant un fonctionnement intelligent et automatisé des circuits en fonction de l'état de l'entrée.
Komunikacijski protokol	NMEA 2000
Broj ulaza	6.0
Broj izlaza	0.0
Žičani ulaz	Connecteur NMEA 2000
Žičani izlaz	Connecteur NMEA 2000
Vrsta priključka	Connecteur NMEA 2000
Kompatibilan s MasterBus-om	Non
Kompatibilan s CZone	Oui
Kompatibilan s NMEA 2000	Oui
Raspon radnog napona	9-16 V DC
Vrsta montaže	Montage en surface
IP zaštitni stupanj	IPX5
Dimenzije (Š x V x D)	100 x 156 x 42 mm
Težina	0.281
Alarm Trigger Conditions	Interrupteur de niveau d'eau élevé
Raspon otpora analognog ulaza	0-1000
Raspon napona analognog ulaza	0-34
Analog Input Voltage Range Precise	0-5
Barkod proizvoda	80-911-0013-00
Certifikati	CE, RCM, NMEA 2000
Serije kompatibilnih uređaja	Tous appareils NMEA 2000
Data Transmission Category	Fluide, Température, Pression
Podaci koji se prenose	Informations de fluide, de température et de pression
Digital Input Voltage Range	0-35
Materijal kućišta	Polycarbonate, ABS
Input Configurability	Oui
Input Signal Type	Interrupteurs (négatif, circuit ouvert, 0-35V DC), sondes de niveau de réservoir (0-5V, 10-180 Ohms, 240-33 Ohms), signaux voltaïques ou résistifs
Input Terminal Type	Bornier à vis
Okoliš ugradnje	Marin
Vrsta sučelja	Interface de signal
Led Status Indication	Oui
Kompatibilnost s MFD-om	Tous appareils NMEA 2000
Operating Temperature Range C	-20°C à +55°C
Zaštita od prenapona	Oui
Težina pakiranja	0.363
Tipična električna potrošnja (mA)	100
Izvor napajanja	Alimentation via réseau NMEA 2000
Kategorija proizvoda – razina 0	Marchandise
Kategorija proizvoda – razina 1	NAVICO GROUP
Kategorija proizvoda – razina 2	04 - CZone (40)
Uloga proizvoda	Intégration de capteurs et interrupteurs externes
Serija proizvoda	CZone
Vrsta proizvoda	Module d'interface de signal
Volumen proizvoda (cm³)	655.2
Storage Temperature Range C	-40°C à +85°C
System Automation Functions	Gestion centralisée et automatisée des circuits
Tipovi podržanih spremnika	Sondes de niveau de réservoir standard (0-5V, 10-180 Ohms, 240-33 Ohms)
Vendor	CZONE
Žičana mreža	NMEA 2000

Detailed description

Sučelje za signal CZone SI (referenca 80-911-0013-00) predstavlja središnji element za integraciju senzora i vanjskih prekidača unutar digitalnog sustava upravljanja i nadzora CZone. Dizajnirano za proširenje mogućnosti mreže NMEA 2000, omogućuje centralizirano i automatizirano upravljanje strujnim krugovima na temelju različitih ulaznih signala.

Povezivost i višestrukost ulaza

Ovaj modul opremljen je s 6 konfigurabilnih ulaza koji nude fleksibilnost za različite pomorske primjene. Prihvaća signale tradicionalnih prekidača (negativni, otvoreni krug, 0-35V DC) za upravljanje izlazima, kao i uzbune poput prekidača visokog vodostaja. Sučelje također podržava standardne industrijske sondne uređaje za razinu spremnika (0-5V, 10-180 Oma, 240-33 Oma) te općenite voltaičke ili otporne signale. Specifični rasponi ulaza su od 0 do 1000 Oma za otporne signale i od 0 do 34 V DC za naponske signale. Svaki ulaz ima LED indikator statusa za olakšanu nadogradnju. Ova višestrukost ga razlikuje od osnovnih ulazno/izlaznih modula koji podržavaju samo jedan tip signala, čime sučelje SI postaje rješenje za agregaciju podataka unutar sustava CZone.

Integracija i tehničke specifikacije

Sučelje za signal CZone SI integrira se u mrežu NMEA 2000, omogućujući prijenos standardiziranih podataka poput informacija o fluidima, temperaturi i tlaku prema višenamjenskim ekranima i drugim kompatibilnim uređajima. Dimenzije su 100 x 156 x 42 mm, a težina 281 g. Uz zaštitu od privremenog uranjanja IPX5, prikladno je za morske uvjete. Modul udovoljava normama EMC IEC EN 60945, IEC EN 61000, FCC Class B, ISO 7637-1 i ISO 7637-2, osiguravajući kompatibilnost s elektromagnetskim smetnjama i otpornost na električne interferencije. Idealno dopunjuje postojeće sustave CZone, poput ekrana Touch 10 ili kombiniranih modula, služeci kao most za senzore koji nisu NMEA 2000.

Documentation

Type	Nom
	_tchdat_bep1_pdf.pdf
	czone_signal_interface_user_installation_manual_v2.pdf

Expert review

Pol CONIN

Digitalni odgovorni

« The CZone SI interface: the analog-to-digital bridge for your NMEA 2000 network »

The CZone SI signal interface is a strategic component for any CZone installation seeking to integrate analog or passive sensors and switches into a NMEA 2000 environment. Its primary role is to digitize these signals to make them usable by the CZone system, enabling centralized automation and monitoring.

This module is particularly relevant for retrofits or custom installations where existing equipment (tank float switches, bilge pump switches, hatch position sensors, manual navigation lights) must be connected to the digital network. It eliminates the complexity and cumbersome wiring of traditional analog systems by providing a single interface for 6 inputs. Integrating this interface significantly simplifies wiring topology and alarm management.

It is essential to plan the module’s location to optimize sensor cable lengths and ensure the NMEA 2000 network is properly sized to accommodate it. While IPX5 provides good protection against splashes, it is recommended to install it in a dry compartment or under a deck to maximize its lifespan. This module is a wise choice for integrators looking to offer their clients a smart, unified solution for managing onboard equipment, fully leveraging the capabilities of the CZone system.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sučelje za signal CZone SI

287,82€

287,82€ ~~362,16€~~

Frequently Asked Questions

Need help? Contact us

What is the CZone SI signal interface?

The CZone SI signal interface (reference 80-911-0013-00) is a central module designed to integrate external sensors and switches into a CZone digital switching and monitoring system. It enables the expansion of NMEA 2000 network capabilities for centralized and automated management of circuits from various inputs.

How many configurable inputs does the CZone SI interface have?

The CZone SI signal interface is equipped with 6 configurable inputs, providing high flexibility for various marine applications.

What types of signals can the CZone SI signal interface accept?

This module is versatile and can accept several types of signals:

Traditional switch signals (negative, open circuit, 0-35V DC) for output control.Alarm triggers, such as a high water level switch.Standard industry tank level sensors (0-5V, 10-180 Ohms, 240-33 Ohms).General voltage or resistive signals.

What are the specific input ranges for resistive and voltage signals?

The specific input ranges for the CZone SI interface are:

0 to 1000 ohms for resistive signals. 0 to 34 V DC for voltage signals.

Does the CZone SI interface have status indicators for its inputs?

Yes, each input on the CZone SI signal interface is equipped with an LED status indicator, which facilitates monitoring and diagnostics.

What are the physical dimensions of the CZone SI signal interface?

The dimensions of the CZone SI signal interface are 100 x 156 x 42 mm.

What is the weight of the CZone SI signal interface?

The weight of the CZone SI signal interface is 281 grams (0.281 kg).

What is the water protection rating of the CZone SI interface?

The CZone SI signal interface has temporary immersion protection with an IPX5 waterproof rating.

How does the CZone SI interface connect to the boat's system?

The CZone SI signal interface integrates into the NMEA 2000 network, enabling standardized communication with other compatible devices in the boat's system.

Is the CZone SI signal interface compatible with multifunction displays (MFD)?

Yes, thanks to its integration into the NMEA 2000 network, the CZone SI interface enables the transmission of standardized data to multifunction displays (MFD) and other compatible devices.

Which types of tank level sensors are supported by the CZone SI interface?

The CZone SI interface supports standard industry tank level sensors with signal ranges of 0-5V, 10-180 Ohms, and 240-33 Ohms.

Can the CZone SI interface be used to trigger alarms?

Yes, the CZone SI interface can be configured to accept alarm triggers, such as those from a high water level switch, enabling proactive monitoring.

What is the role of the CZone SI signal interface in a larger CZone system?

In a CZone system, the SI interface acts as a data aggregation solution. It collects information from various sensors and switches, then integrates it into the NMEA 2000 network for centralized management and monitoring.

What types of data does the CZone SI interface transmit on the NMEA 2000 network?

The CZone SI interface transmits standardized data such as fluid levels, temperature, and pressure information over the NMEA 2000 network.

Is the installation of the CZone SI signal interface complex?

The CZone SI signal interface is designed for seamless integration into an existing CZone system via the NMEA 2000 network. For optimal installation and configuration of inputs, it is recommended to follow the manufacturer's detailed instructions or consult a professional.

What is the part number (SKU) for this product?

The part number (SKU) for the CZone SI signal interface is 80-911-0013-00.

Is the CZone SI interface designed specifically for a marine environment?

Yes, as a CZone product, this interface is specifically designed for marine applications, as evidenced by its IPX5 protection rating and its ability to integrate with NMEA 2000 networks.